How to RC Tank Conversion from model kits 1/35 Tiger 1 Gruppe "Fehrmann" RFM rye field model Part 1
Вставка
- Опубліковано 15 гру 2024
- Model kits Rye Field Model 1/35 scale Tiger 1 Gruppe "Fehrmann" Pz.Kpfw.VI Ausf.E Sd.Kfz. 181
April 1945 Northern Germany
Parts links:
Motor- shopee.com.my/...
Metal rod- 2mm- shopee.com.my/...
Cutter- shopee.com.my/...
1:35 scale is the most popular scale for model military vehicles, with an extensive lineup of models and aftermarket parts available from a wide variety of manufacturers.
The roots of 1:35 as a military modelling scale lie in early motorized plastic tank kits. To accommodate electric motors and gearboxes, these models needed to be made in a larger scale. There were many companies making such tanks, but it was Tamiya's example that made 1:35 a de facto standard.
Company chairman Shunsaku Tamiya explains the origins of the scale in his book Master Modeler:
After the success of the Panther, I thought it would be a good idea for us to produce other tanks from different countries in the same scale. I measured the Panther and it turned out to be about 1/35 of the size of the original. This size had been chosen simply because it would accommodate a couple of B-type batteries. Tamiya's 1/35 series tanks eventually got to be known around the world, but this is the slightly haphazard origin of their rather awkward scale.
Early kits in the scale, built around bulky motorization components, often sacrificed scale appearance and detail, but their large size and potential for intricate superdetailing appealed to hobbyists.
Over the years, kits have become more and more detailed and accurate, and nowadays there is a whole industry in 1:35 dedicated to offering aftermarket detail parts for kits. After a new kit is released, companies like Aber and Eduard usually make detail sets available for it, allowing modellers to replace kit parts with more accurate photoetched alternatives.
In terms of model range, 1:35 is typically limited to military land vehicles and figures. Some helicopter kits also exist in the scale, whereas large airplane kits are more commonly done in 1:32 scale. In recent years, there have been some aeroplane releases in 1:35 as well, typically of vehicles operating in close contact with ground forces, such as the Fieseler Storch liaison aircraft or the Horsa glider. The figures are usually designed to go with the AFV's though, and are largely based around World War II. World War I figures are unusual and pre-1914 figures are very rare indeed.
Academy Plastic Model (Korea)
Ace (Ukraine)
Ace Corporation (Korea)
Admiral (Czech Republic)
AFV Club (Taiwan)
Aim Fan Model (Ukraine)
Airfix (UK)
Alanger (Russia)
Alan Hobby (Russia)
AMT (USA)
Amusing Hobby (Japan)
Aoshima Bunka Kyozai (Japan)
Ark Models (Russia)
Arma Hobby (Poland)
Armory (Ukraine)
Art Model (Ukraine)
Asuka Model (Japan) - former Tasca
Atlantis Model (USA)
Aurora Plastics Corporation (USA)
AvantGarde Model Kits [AMK], (Macau with subsidiary in UK)
Bandai (Japan)
Black Label (China) - Brand of Dragon Models
Bronco Models (Hong Kong, China)
Caesar Miniatures (Taiwan)
Cyber Hobby (China) - Brand of Dragon Models
Czech Model
Daco Plast (Russia)
Doyusha (Japan)
Dragon Models Limited (Hong Kong/China)
Eastern Express (Russia)
Eduard (Czech Republic)
Fine Molds (Japan)
Flagman (Russia)
Foresight (Japan)
Freedom Model Kits (Taiwan)
Fujimi Mokei (Japan)
Great Wall Hobby (China)
GSI Creos (Japan) - former Gunze Sangyo
Hasegawa (Japan)
Hawk (USA)
HK Models (Hong Kong, China)
Hobby Boss (China)
Hobbycraft (Canada)
Huma Modell (Germany)
ICM Holding (Ukraine)
Imai Kagaku (Japan)
Imex Model (USA)
Italeri (Italy)
Kinetic (Hong Kong, China)
Kitty Hawk Models (China)
KP Models (Hungary)
Lindberg Models (USA)
Lion Roar (China)
Marusan (Japan)
Matchbox (UK/Germany)
Master Box (Ukraine)
Meng Model (Hong Kong, China)
Merit International (China)
Micro Ace (Japan) - former Arii
MiniArt (Ukraine)
Mirage Hobby (Poland)
Model Products Corporation (MPC) (USA)
Modelcollect(China)
Modelkasten (Japan)
Monochrome (Japan)
Mr. Hobby (Japan) - brand of GSI Creos
Panda Hobby (Hong Kong, China)
Pegasus Hobbies (USA)
Pit-Road (Japan)
Plasticos Lodela S.A. (Mexico)
Zvezda (Russia)
Humbrol - Airfix/Heller
Injection-moulded ("short-run" low pressure)
Amodel (Ukraine)
AZ Model [2] (Czech Republic)
Azur [3] (Czech Republic/France) - Brand of MPM production s.r.o.
Eduard (Czech Republic)
Vacuum formed
MiniArt
OzMods Scale Models
Thank you so much for making this video I've been looking for a way to build a one 35 scale rc tiger
No problem 👍
Unlike the real thing, the gearbox actually works
Thanks so much for this! I make a living painting models for the game 'Warhammer 40K' with a bit of tweaking, I can offer to RC convert the tanks I'm asked to paint.
Whats that little part on your hand? 4:53
ABS board. glue together with superglue
Hi, how to you ensure the road wheels from falling out?
Bang boleh buat list component electronic tak untuk buat ni..
How about a list of the components you used?
Two modified n90 motors for gearboxs
Electronics taken from 1/30 heng long or any cheap toy grade rc
How did you fit the suspension so it won't fall off and what thickness are the shafts and what did you use to cut them?
The kit come with workable suspension. So just follow the instruction and use plastic cement.
Shaft thickness is 2mm. Use rod cutter to cut it.
Encik, Kit Elektronik tu beli dimana?
The electronics are out of a little heng long tank I made a mark IV English tank with the same electronics and I bought the parts from the factory
工作👍
What about interoir versoin of this kit could you still do??
Hey where can i find this kit? Could i use a Tamiya kit or would it be to different?
the left side suspension arm are all pointing forward!
great job! really cool! whats the total cost of materials plus kit?
Impressive! I had the same idea a few years ago and developped a full kit to make this kind of conversion easier. Have a look at my channel and let's talk about it!
Did you make the gearbox? If so how?
2mm metal shaft, plastic gear, cutter, hand drill 2mm, abs board, n20 gear motor
Great! May I know the rpm of the sprocket wheel's modified gearbox?
around 100rpm
Hi good job and do you use adurino board?
I don't. I use this --> ua-cam.com/video/Tg4POPHePzY/v-deo.html
@@azharyusof5743 wow Eye opener ! But this mother board have sound and smoke unit?
@@user-irb i dont think so man
@@m.faizhusain7348 m clever. Boy
I want to do this but I don't know where to start tbh. All the moters and transmitters and stuff. I wish I knew how to do it
this video will help some : ua-cam.com/video/Tg4POPHePzY/v-deo.html
This is actually so amazing but list of where you got the parts?
the remote control system taken from heng long rc tank.
i bought separate plastic gears, abs sheets, rn20 dc motors, metal shafts and scratch built them.
@@azharyusof5743 I thought so I have a heng long and was wondering why it sounded the same
Awesome 👍
Hi Azhar, great job. Well done. I see you've used a battery pack 3,7 V, 600mAh. Is it sufficent ?
Yes. For some tank. But need to increase voltage for bigger tank especially after painting the tracks.
@@azharyusof5743 Thanks for your reply !
Hey man how did you make the suspension work
I know how but ik how to say it
Where you get this Motors with geraboxes?
shopee.com.my/N20-Miniature-Geared-Motor-DC3V-6V-DC-Motor-Pure-Steel-Metal-Gear-Reducer-Teardown-i.180739141.3313679209
very nice, do you have any 1:16?
Yes, i have few stock heng long tanks
@@azharyusof5743 did you know our local have RC Tank event 4-5 times each year?
Bro, butuh apa aja yang bikin tank nya jadi jalan dan turret nya muter
Tonton sampai habis