All those things you mentioned are spot on, but one thing you need to add and is number one on the list, Fire Extinguisher. With all the chemicals, solvents, welders, heat wrenches….Fire suppression is a must!
A curtain that runs in a track on the ceiling or a shower curtain around the "Dirty Area' can really help keeping the rest of the shop clean. If you need to grind or buff some parts, pull the curtain and it stays contained to that area. Thanks for sharing the adventures ✌
Excellent episode... Honey, that's why I needed the floor jack and jack stands... you wouldn't want anything to happen to me would you?... would you?... Honey?
I used to have a really good one of these but the retract part stopped working. I am so dependent now on my headlight, I burn thru AAA batteries sometimes in a day!
Thanks VW Life I’ve felt inspired by your channel so much that I’ve started work on my T2 after 4 years I really enjoy the fun antics and the knowledge I learn You guys are the best ! 😊
If you’re thinking of picking up one of the HF tool boxes, I highly suggest it. The depth of the drawers compared to the Craftsman box (I have one too), makes it well worth it.
Torque wrenches, a set of ring installation tools (I like the sleeves versus the compression type tools), and a ring removal tool with a ring grinder to set ring gap. Bore gauge for getting the right bearing clearance, although it's not needed for mild engines and stock engines. A flywheel lock is really handy and the torque multiplication tool for removing and installing flywheels which is also great for axle nuts. A really nice air compressor goes a long way in your shop too, and a welder. Even if your not fabricating anything, a welder is your friend for removing broken off studs.
Always like to see these how to and what you need to make the job easier. I like to lay out a piece of brown craft paper on top of the workbench with a sharpie to identify parts and location Peace
Appreciate the effort you do to keep bringing good tips (educational) on your channel. But what I want to know is info on the insulation in Gilbert. I'm to that point for my bay and could use some "pointers." Thanks Gary.
Charles! Thank you for watching. As for the insulation on Gilbert. I go top HomeDepot and get a roll of that insulation you put around your hot water heater. It is plastic, holds up well, and does not retain moisture. I use 3M 90 Spray adhesive. I also, double up the insulation. Super easy to trim with a razor blade too!
I put a swear jar in my garage & use that money on VW parts. haha I know this is a touchy subject for lots of VW people but can you guys do a video on oil ?
G'day, The only thing I would add is if your buying a bench grinder don't buy less than one horse power. The less powerful ones tend to stall out. So thanks for sharing ✌️ Peace from Melbourne Australia.
Juan, I should have made a video non the install of the scrapers on Gilbert, but I don't think the censors on UA-cam would have let it by! I will say this, I made a tool out of wood to 'pop' in the rubber wire clips, works like a champ!
TUNES! You forgot about a good source for some tunes to get you through your work! Radio - stereo - cd player - whatever. I put that on the top of my list - #1.
A comprehensive list! Thanks Gary, the tool rundown videos are always appreciated. Quick question on the point you made about reusing your original VW hardware; once wire wheeled back to clean steel, what kind of polish are you using to prevent future rusting? Something generic like Autosol or something more specialist?
Do you ever stand at the open garage door and say: "Jake, someday all this will be yours!" What a legacy. You always inspire me to go work on one of my VWs. Thanks.
Great job Gary, I like my radio playing oldies of course, and like You some art work, I’ve got about 8 old Vw Show Posters (Classic, Gene Berg rally) love Ron Petro’s work and of course room for that next project, because 3 going isn’t enough 😂, thanks.
Looks so good, but people need to know it took you years to get it like that unless someone have a bottomless check book. LoL Only other things I would have to say is if your 50 plus is one of those work bench adjustable arm lighted magnify glasses and a beer frig. Thanks for sharing another great video. ✌🏻❤️VWLIFE
Wade, so very true, I have been building and adding and collecting tools and such for 50 years plus. That old Sears floor jack is a good example. I bought that when I bought the "Vette" back in 1978! the Che-Vette!
Glad willy is doing well. I'd add music if you're working alone. A lot of my tool draws look like yours. I have shop clean up days after a big project to be ready for the next one.
I don’t think you fully understand how significant documenting this stuff is. I’m a Zoomer and most of my generation wouldn’t know where to begin setting up a shop. This is common sense knowledge that you take for granted. It’s not all that common with my generation. Just hasn’t been passed on.
Matthew, I appreciate your candor. I am glad to hear this can sort of guide you and others on setting up your garage/shop. Please ask questions and stay tuned. I think we may do an episode on more specific tools you need soon.
Bentleys are the best!!! I have mine stashed over on a shelf on the end of the bench by a little desk I built in. I didn't show it on the video because it was piled high with junk!
Good shop vac; extension cords; maybe an ultrasonic cleaner. Great video!
Tommie has a big Ultrasonic that we use when needed. Awesome item for the shop no doubt
I go by his shop occasionally, yes, it’s amazing! He really is that organized and tidy!
Mostly tho, he’s super guy with a heart of gold. ❤
A mini fridge to keep the mechanic happy 🥤
And the thirsty friends that stop by!
Awesome subject and video. I would add fire extinguishers and a welder of some kind and the knowledge to use it.
YES! A Fire extinguisher is a MUST have. And, put one in your VW too!
Cardboard! There’s no better way to slide around under your VW than on a heavy duty piece cardboard!
Magnetic lights and an angle grinder are extremely necessary too. I wish I was half as organized as you; very impressive.
Thank you Fix it Scotty! Yes! Angle grinder is your friend!
All those things you mentioned are spot on, but one thing you need to add and is number one on the list, Fire Extinguisher.
With all the chemicals, solvents, welders, heat wrenches….Fire suppression is a must!
A curtain that runs in a track on the ceiling or a shower curtain around the "Dirty Area' can really help keeping the rest of the shop clean. If you need to grind or buff some parts, pull the curtain and it stays contained to that area. Thanks for sharing the adventures ✌
Oh, and a good impact screwdriver too.
Excellent episode... Honey, that's why I needed the floor jack and jack stands... you wouldn't want anything to happen to me would you?... would you?... Honey?
This is an excellent strategy! Also, Honey, remember that chair where the leg broke, if I had a welder I could fix that right up for you!!!
I like to have a ball game on in the background as I work in my garage. And tunes! Must have a radio or stereo Thanks Gary!
Thank you Scott for being a VW LIFER!
I need a decent splitty in my garage lol. Nice shop set up Gary
drop light & extension cord. The roll out & return one is nice.
I used to have a really good one of these but the retract part stopped working. I am so dependent now on my headlight, I burn thru AAA batteries sometimes in a day!
Thanks VW Life
I’ve felt inspired by your channel so much that I’ve started work on my T2 after 4 years
I really enjoy the fun antics and the knowledge I learn
You guys are the best ! 😊
Great to hear!
You are So organized and neat! When are making parts list it’s so detailed I’m impressed - when I grow up I wanna be like you!
Yea- Gary is the best when it comes to organization.. I too want to be like him when I grow up .... Tommie :)
4 point jack stands with safety lock pin. I use larger stands that don't need to be extended too far.
I like the idea of larger/taller jack stands!
If you’re thinking of picking up one of the HF tool boxes, I highly suggest it. The depth of the drawers compared to the Craftsman box (I have one too), makes it well worth it.
A Creeper and Rags and FIRE Extinguisher !
I'm hoping to build a shop this summer 🙏 Wish me luck!
I like it Drew!!!
Good luck! Build it big and BAD!!!🤘
Torque wrenches, a set of ring installation tools (I like the sleeves versus the compression type tools), and a ring removal tool with a ring grinder to set ring gap. Bore gauge for getting the right bearing clearance, although it's not needed for mild engines and stock engines. A flywheel lock is really handy and the torque multiplication tool for removing and installing flywheels which is also great for axle nuts. A really nice air compressor goes a long way in your shop too, and a welder. Even if your not fabricating anything, a welder is your friend for removing broken off studs.
Isn't a flywheel lock tool indispensable!
Loved for the tour. Floor jacks and stands. One of the last things I ever bought but now use the most. Thanks for posting.
Always like to see these how to and what you need to make the job easier. I like to lay out a piece of brown craft paper on top of the workbench with a sharpie to identify parts and location
Peace
I love the list, tools are my thing, triple square for vw
Hey! It looks like Gilbert got a paint job, did I miss that episode? Are you going to the bay window side! Ha! Bays are heating up!
Safety Glasses love your posts
I am sure you have these but a drop light or a bar light are must haves too the only thing I am missing is the parts cleaner and its high on the list.
Appreciate the effort you do to keep bringing good tips (educational) on your channel. But what I want to know is info on the insulation in Gilbert. I'm to that point for my bay and could use some "pointers." Thanks Gary.
Charles! Thank you for watching. As for the insulation on Gilbert. I go top HomeDepot and get a roll of that insulation you put around your hot water heater. It is plastic, holds up well, and does not retain moisture. I use 3M 90 Spray adhesive. I also, double up the insulation. Super easy to trim with a razor blade too!
Wowee! A whole new meaning to organization. Impressive. Thx for the info on OK Petroleum. I'm ordering my 20w50. Love ya'll
Thank you Jenny!!!
Hey Gary ! Farrah Fawcett poster
I wished I had my old Farrah poster!!!
I put a swear jar in my garage & use that money on VW parts. haha I know this is a touchy subject for lots of VW people but can you guys do a video on oil ?
Jamie,
We used to have a 'cuss jar' when Jake was young. That's how we paid for his college!hahaha
AND, yes to oil video. It is a crazy subject, but we can for sure share our ideas/opinions!
@@CapnTexan Hahaha!!! See cussing IS good! Looking forward to the oil video!!! It should get a lot of opinions going! Have a nice weekend! 🤘
Hahaha, imagine a teacher spelling "through" as "threw"!!!! But having said that, great video Gary.
G'day,
The only thing I would add is if your buying a bench grinder don't buy less than one horse power. The less powerful ones tend to stall out.
So thanks for sharing ✌️ Peace from Melbourne Australia.
Yes, love my old Sears bench grinders.
Looks like you have everything you need !!! Any videos on installing inner window scraper ??
Juan,
I should have made a video non the install of the scrapers on Gilbert, but I don't think the censors on UA-cam would have let it by! I will say this, I made a tool out of wood to 'pop' in the rubber wire clips, works like a champ!
@@CapnTexan oh why too much cussing 🤬. And yes I saw the tool in your tool box
TUNES! You forgot about a good source for some tunes to get you through your work! Radio - stereo - cd player - whatever. I put that on the top of my list - #1.
As good as a secret tour of the BatCave!
Thank you Jorg! Glad you came along for the tour
Thanks for Your Inspiration!
Thanks for the code to OK Petroleum...already bought a gallon! No more free shipping though, but it wasn't that bad at $4.95. Great deal!
Good to hear shipping wasn't too terrible. I'm telling you, it's crazy what they have and the prices too Use that code y'all! VWLIFE
Yes $4.95 shipping but my VWLife code covered that. I have some correct Sta-Lube 85-90 GL 4Gear lube on the way we
A comprehensive list! Thanks Gary, the tool rundown videos are always appreciated. Quick question on the point you made about reusing your original VW hardware; once wire wheeled back to clean steel, what kind of polish are you using to prevent future rusting? Something generic like Autosol or something more specialist?
I asked myself the same question, I'd love to know more. I currently go with steel blueing solution, but the process is quite time consuming.
My essential tool is a refrigerator with multiple Cold PBR s just so I can get started on any project .... just saying
Got the same sears floor jack. You're right on sentimental value. A lot of vws
I wished I had a dollar for every car that ol jack has raised up and then back down!
Do you ever stand at the open garage door and say: "Jake, someday all this will be yours!" What a legacy. You always inspire me to go work on one of my VWs. Thanks.
Kimo! Jake sometimes just shakes his head!
VW LIFE BABY ! Every VW shop need at least 6 or 7 bugs and buses.. some ghias.. maybe some type 3 hahaha
The more VW's the merrier!
Went through the whole thing, check, check, check...til the parts washer. Some day...
As a teacher, I know that you know it is "through" not threw!!😂
Hayden! Yes indeed, I teach Science! hahaha
Good video,,,,, Where is Matt Jackson????
Great job Gary, I like my radio playing oldies of course, and like You some art work, I’ve got about 8 old Vw Show Posters (Classic, Gene Berg rally) love Ron Petro’s work and of course room for that next project, because 3 going isn’t enough 😂, thanks.
David! Yes to tunes. It's funny, I might throw on an old Willie Nelson CD, and then next up might be Dark Side of the Moon!
Looks so good, but people need to know it took you years to get it like that unless someone have a bottomless check book. LoL Only other things I would have to say is if your 50 plus is one of those work bench adjustable arm lighted magnify glasses and a beer frig. Thanks for sharing another great video. ✌🏻❤️VWLIFE
Wade, so very true, I have been building and adding and collecting tools and such for 50 years plus. That old Sears floor jack is a good example. I bought that when I bought the "Vette" back in 1978! the Che-Vette!
Fire extinguisher.
Probably the first thing to get for the shop and in the car itself. Good one!
You do need lots of tools for Sure, good Video Gary loved the tour thru your tools...
Creeper, rolling stool, bench stool, drink refrigerator!
Nice set up. We could do some damage in there 😂 Think we landed in the next best place down in Ecuador.
Good to hear from y'all! Hope the Journey is treating y'all well.
@@VWLifeVW it's going great.
Currently in a garage in Ecuador attempting an ambitious rebuild 😬
First Aid Kit.
YES! I have a spray bottle of hydrogen peroxide and then some squirt on anti-bacterial, I had to use it on the Bearded Wonder once!
You forgot the headlamp that you use so often.🤔
Love these videos on what you recommend. Thank you Gary. God Bless
Thank you Mark for watching!
Workshop trolley to put your tools on
It’s a nightmare when you’ve got tolls everywhere on the ground it’s nice to keep them all together
Good video Gary. Thanks for keeping the channel going. ⚙🔧
Matt - PLEASE COME BACK!! I miss the fun spark and editing of your videos.
Thank you RBV! The VW Community is a special place for sure!
Must have a torque wrench and a torch set.
Your a young man now Gary... but one of those roller stools are pretty nice !!! With the tool tray under the seat...you know.
I do have one of these, way better than a milk crate!
Need to axe that damn Windex,and getya some SprayWay. Best glass and general foaming cleaner.
In your chemicals-- where's your isopropyl alcohol? Also- for PPE- gloves! Cars can be nasty, chemicals ARE nasty... gloves! :)
Gloves, Gary!!! Lol - Brando
Yes, I have some pretty dedent rubber gloves I use, or try to use when I'm sticking my hands down in the parts washer!
@@CapnTexan Your shop is awesome.
Glad willy is doing well. I'd add music if you're working alone. A lot of my tool draws look like yours. I have shop clean up days after a big project to be ready for the next one.
YES! I have my old stereo which is a must, and my CD collection is now out in the shop if I wanna listen to some Lynrd Skynrd or RAMONES!
You forgot one the most important items to have in the garage/shop...a radio!
nice job.
Thanks for the video! Just crack my skull open and needed six stitches. It's just nice to think about something else.
OUCH!!! get better KAX - best wishes
👍
First and foremost is a grandson who puts shit back where he got it! 🤬 Still working on that!!!!
If the car is running, car ramps are easier than jacks and jack stands.
This car was a little to low for ramps unless they would be super low profile.
I don’t think you fully understand how significant documenting this stuff is. I’m a Zoomer and most of my generation wouldn’t know where to begin setting up a shop. This is common sense knowledge that you take for granted. It’s not all that common with my generation. Just hasn’t been passed on.
Matthew, I appreciate your candor. I am glad to hear this can sort of guide you and others on setting up your garage/shop. Please ask questions and stay tuned. I think we may do an episode on more specific tools you need soon.
Yep - Thanks Matthew - Awesome of you to hang out with us
You got a 68 wiper arm in one of those tubs?😂😂 Lost one today, worn spindles..
Bentley manuals, phone or computer for researching parts or procedures.
Bentleys are the best!!! I have mine stashed over on a shelf on the end of the bench by a little desk I built in. I didn't show it on the video because it was piled high with junk!
Looks like a real functional shop. I've worked with less 🤪
Yes indeed. I have done many a job out in the dirt and sun and rain and...no snow though!
Greetings from VW CLUB ALBANIA.... SEND US SOME STICKERS PLEASE !
allmetricgarage.com get ya some :)
Shop lights.. trouble lights
Welder ,wipe board.
Check and Check.. great suggestions
I hope Matt Jackson is ok. I miss him and Helga a lot.
Oh that elephant in the room. Shhh……
Matt is doing good and enjoying a well-deserved break.
Need money
Multi-meter
How often do we rely on this! Great suggestion!