How to connect to 2 4Ghz Wi Fi
Вставка
- Опубліковано 17 жов 2024
- Many smart or security devices require that you connect to 2.4GHz networks during the setup phase. This could be as easy as selecting from a list of available networks on your smart phone but many times this is not the case and setting up that smart or security device just does not work . This video was created to help with connecting to your 2.4GHz network and getting that smart or security device configured and connected to your Wi-Fi. We also provide some great information on the differences between 2.4Ghz and 5GHz.
![Lp. Сердце Вселенной #30 ДВА В ОДНОМ [Один человек]• Майнкрафт](http://i.ytimg.com/vi/nrXy15orKhY/mqdefault.jpg)
I bought a lamp from amazon almost a month ago. Ive legit tried a million times to connect it to the wifi. Also my humidifier wouldn't connect. I watched a ton of videos but nothing was clear. Finally Finally i found your video!!! Im so greatful! I thought i would have to return the lamp cause i couldnt figure it out. But this video was so helpful!! It took me many many tries!! 4 hours later and its finally up and running from my fone!! Thank you for the detailed instructions it was super helpful ❤
I'm really glad it help!
I have never written a comment on a video but I want to say thank you so much for this video. This was really helpful
Glad it helped!
I am speechless after having watched your video. I was about the smash the 2.4g CCTV camera and about to buy a '4G camera' when I had decided to dig in more into the 2.4g/5g debate and learn a bit more as to why things are different. Your explanation is absolutely crystal clear. Hope to get it going now. Many thanks!
Thank you for the kind comments. I'm glad it helped
How did it go?
How the heck do you NOT more views and subscribers on your channel? You’re a real good talker and you’re a very interesting to listen to. You make it to where we understand everything you are saying.
Thanks for the great review. I really do appreciate it.
@@senexhome No problem you deserve it! And I actually was able to get my 5g off my tablets and phone and switch them to 2.4 GHz and then my solar cameras finally accepted and successfully downloaded on to them to the app! I had to go to my router app which you said and accomplished it there and I figured it out! Thank you!
Thanks so much for this video which really helped. In my case, all I had to do was to walk away from my property until the wifi connection dropped. As I slowly walked back, my phone reconnected to the 2.4GHz band and it has stayed on that even back in the house, so I have been able to connect all my smart devices without any problems before reconnecting my phone to 5GHz. Perfect 😊
Glad it helped!
Superb information, not touched SSiD's/Router setups for 20+ years - Nice refresher ... Especially about the newer Dual-Band WI-Fi or 5G Network.
Thanks for taking the time and putting this out for us All to benifit from
Glad you enjoyed it!
Dude thank you. I was so confused but your video helped me connect my camera! youre a legend!
Glad it helped!
This video is amazing! Best info I’ve ever come across. I’m sending the link to everyone I know. Thank you so much.
Awesome, thank you!
I wish all " how to" videos were explained this well!!!
Thanks for the kind words.
Very well presented and informative.
Thank you for putting this out.
My pleasure! Thanks for the feedback
I have a dual band router from Starlink. I have Wyze floodlights / cameras that only work in 2.4 ghz frequency. Is there a way to split or shut off 5 ghz. Do I want to shut off 5 ghz & possibly reduce download speeds ? TY
Your Starlink router should allow you to split the 2.4/5 GHz into two channels. Try going to the settings in the Starlink app and find the option "Split 2.4/5". You can also try disabling the 5Ghz radio temporally but should enable again once done.
@@senexhome TY, let's hope this works 🙏
Can i revert back to Bandsteer after setting up the device connection.
If you have separate SSID's I would think yes. Once connected your device should be able to access the 2.4gHz band
Motorola mg8702 shis only 1 ssid. I was in settings yesterday before i knew about this well explained video. I dont recall having access to any of these mitigation settings Now educated im returning it and buying one that has selectable, named bands or the ability f me to segregate the bands as shown. The market has spoken…to hell w motorola mg 8702
Thanks for the information, very helpful...
I'm glad it helped. Thanks for watching
My camera often says "remote session overload " and disconnects . Any advice on fixing this?
Based on the message 'remote session' would lead me to believe the issue has something todo with too many users viewing at the same time? If only one remote session (user viewing) then maybe try to reduce the load on your system by reducing frame rates or resolution (could be called quality) on the camera(s). Other features that take processing power could be Motion Detection and CODEC settings. If none of the above work then I would need more info on your your system like model, # cameras and settings to be able to make a better diagnoses.
So very helpful!!!!! Thank you!
So glad!
thanks for your tutorials
You are welcome!
THANK YOU SO MUCH i can finally watch my pets
You're welcome!!
I've done everything it says ti reconnect and nothing is working, it says, my centurylink is connected, but still it comes up my ring doorbeel is off line. I've had no service since 8/17/2023. I've contacted support and no one has gotten back to me
Hi, thanks for watching my video. Just a few questions in order to help. When you say "my centrylink is connected" can you tell me where you are seeing this message? Do you have any other 2.4ghz devices on your network that are working? How far is your Ring door bell from your router? Can you move it closer and try? What model of Ring are you using?
Not concerned about lamps light bulbs or all that. I just need a stronger signal for my phone to pickuo in pattio area where signal is weak do to wall penetration issues. 2.4 is supposedly better for that.????
Yes 2.4 is better for penetration and range. It would be the best option.
Thank you this was very helpful
Glad it was helpful!
Hi should i disable the 5ghz completely
Temporarily maybe. Just to get connected to 2.4 then re-enable. 5GHz is faster and maybe less congested.
@@senexhome thank you
TYTYTY! GREAT INFO.
Esse cara é foda!!!
Matter 1.0 smart devices will be easier to set up in the future💯
Yes, matter promises to make things easier. Thanks for your input.
You do not need separate ssid’s. I have about 70 items which require 2.4 and have a single ssid and no issues
Great to hear! Thanks for the input.
You will
Man I’ve tryed absolutely everything and understand it all clearly but still to no prevail it will NOT SHOW , 2.4 even with band stearing off and ssid named seperate , Telstra smart gen 2 modem , wat the hell do I do , it use to work once upon a time now nothing shows except 5G crap , please help not even service provider have answers for me hmmmmmmmmm
Hi. Thanks for viewing our video. I assume the 2.4Ghz doesn't show on any of your devices. Since you tried all the basics like disabling Band Steering, separate SSID's then maybe a factory reset may work. You may want to retry a couple of times. Have you tried using Guest? Seems there are a lot of issues with 2.4Ghz on this particular model. Maybe have your provider replace it?
thanks
You're welcome!
I see the maker of this video has not made a video i a year😢
Hi, thanks for your comment. I agree that not posting on a regular basis is bad for a channel and I do plan on ramping up again vert soon. Other obligations have been taking up my time. Is there any topic you would like to see a video on?