Vespa 07 GTS 250 fuel pump replacement

Поділитися
Вставка
  • Опубліковано 27 жов 2024

КОМЕНТАРІ • 20

  • @stuartralphs1359
    @stuartralphs1359 Рік тому

    Nice,easy to follow video.If you've had some experience with modern Vespa's,this make perfect sense.

  • @AnnDee4444
    @AnnDee4444 7 років тому +5

    I was able to get my tank out without removing the main engine mount bolt or rear tire. Here is what I did with the front of the scooter supported and strapped to a transmission jack:
    1. remove gas filler trim piece (under seat) and top shock bolts
    2. remove exhaust side shock completely
    3. remove exhaust side turn signal & lower plastic trim panel (holds the reflectors on US bikes)
    4. jack up bike as much as possible, taking care to not damage any cables. You may need to undo some clips
    5. unbolt gas tank, and there is BARELY enough room to slide it out

  • @sssgeneral
    @sssgeneral 10 років тому +1

    great video, can't do the job without bike lift, time to invest this thing, thanks.

  • @nicolasramirez1291
    @nicolasramirez1291 10 років тому

    it is a great video, but i have to this my self and i need something with more details to see if there is any tricky thing in the business, but still, you give a nice tips of the way to do it. and pretty nice song. Thanks.

    • @artsakakihara5519
      @artsakakihara5519 6 років тому

      Nicolás Ramírez
      I have to do the same how did yours turn out did you find any good sites

  • @kithysmith
    @kithysmith 11 років тому

    Great Job

  • @SSRT_JubyDuby8742
    @SSRT_JubyDuby8742 4 роки тому +1

    Nice and easy then

  • @dianarosalindland1566
    @dianarosalindland1566 4 роки тому +2

    How about having the camera positioned where you can actually see what you're doing? This was entertaining but not even slightly useful.

  • @isaaci9211
    @isaaci9211 9 років тому +1

    My ´10 GTS Super may need a fuel pump change, after 1 hour or so riding and once turned off does´nt turn back on. And I been reading this is a common matter. Any tips are welcome. Thanks great video.

    • @JG-kh8ej
      @JG-kh8ej 4 роки тому

      Isaac I was it hard changing the pump ?

  • @carynorton
    @carynorton 9 років тому

    Are you removing the plastic cover where the seat lock and fuel spout is? if so, would you mind explaining how to remove it? I took the hex bolts out but the threaded area of the fuel spout and the rubber ring around it keeps me from getting mine off.

  • @garethkeemore13
    @garethkeemore13 6 років тому +1

    hi, my 2005 gts 250ie stutters and stalls completely when riding at about 60km/h. it starts up and runs fine again but may or may not stall again sometimes. Any idea why? I am thinking it is the fuel filter?

  • @astrait1028
    @astrait1028 10 років тому

    How do you take off the two fuel lines connected to the pump??? I can't figure it out!!

  • @dwaungrant8892
    @dwaungrant8892 9 років тому

    can you replace the fuel injector to be suitable outside the fuel tank

  • @Johnmiller_saved_by_Grace
    @Johnmiller_saved_by_Grace 10 років тому

    Hi I need to remove and replace my gas tank is that the only way to remove it from underneath

  • @artsakakihara5519
    @artsakakihara5519 6 років тому

    Where can I go to school to learn how to fix Vespa's

    • @pravinovosadjanin
      @pravinovosadjanin 6 років тому +1

      art sakakihara where are you from contact me on spartan_motors_belgrade on instagram I will tell you all about it

  • @rafbenarbia9850
    @rafbenarbia9850 9 років тому

    lolll your video just for fun

  • @JG-kh8ej
    @JG-kh8ej 4 роки тому +3

    Literally learned nothing from this video 🤦‍♂️

  • @Maksaccademy
    @Maksaccademy 5 років тому

    Can't DIY