How to make Indigenous Bubble CPAP in under 2 minutes with minimal resources
Вставка
- Опубліковано 15 жов 2024
- How to make Bubble CPAP
A quick demonstration of how to make indigenous bubble CPAP in 2 minutes so that it can be used in resource limited settings.
An useful guide for pediatricians, residents working in resource limited settings.
CPAP provides an intermediate respiratory support to patients who are having respiratory distress on free flow oxygen but not severe enough to require positive pressure ventilation
#cpaptherapy #Bubblecpap #indigenousbubblecpap #pediatrics
Thanks good work keep it up 😊
How can we humidify oxygen with this set-up ....?? Kindly suggest??
The source of oxygen, attached to a flow meter can be used to humidify
Actually there's one mistake... The placement of oxygen pipe & iv pipe shoul
Should be opposite to each other
In the 3 way stopcock
In the 3 way stopcock. Also micropore to be used if to make it airtight.. For more effective ness
Not needed. If u attach properly, it will be perfectly airtight
Equivalent
Please can you explain how can we set PEEP....I mean we set this from top or bottom
The length (in cm) of the part of tube inside the water column in the pedi chamber is equivelant to PEEP.
E.g. If length of tube immersed in water is 6cm, then you can think that approximately 6cm H2O PEEP is getting delivered
Is it measured from top or bottom ???
Its not working but plz explain me that the water sources keep lower or upper
Water always has to be kept lower than the level of the child.
If you are unable to get it right, please watch the video again and again and follow the exact steps and you will get it right
Very nice
Thank u bhai
Sir maximum O2 how much we can give?
Same principle as giving oxygen by nasal Cannula / prong. Maximum flow rate can vary depending upon age.
Thank you so much Sir, please suggest for neonate maximum O2 in litter
For Neonates better to use up to maximum 1-2 L/min via nasal Cannula
Me.... Thinking by using this method we can increase O2...
Yes why not. U can use a blender to regulate FiO2 and give desired amount
HW will we know about peep sir ??
That's a very good question. The amount of depth of the tube inside water correlates with PEEP. for example if the depth of tube inside water is 5cm, then it delivers PEEP of approximately 5cm
Thnk u so much sir here we learn that mark of 10 ped set is approx to 1 cm of peep is it right?
M doing my md ped ur videos help me alot for concepts kindly make more videos on common topics we generally see ..
Thank u so much sir 🙏
@user-pk8fr5gb7y thank you for your feedback. Please suggest some topics on which you would like future videos to be made
Complete content on nephrotic syndrome
Great. Will make soon
It's not working the patient is going to cyanosis
A patient having cyanosis obviously has some very serious condition like a cyanotic cardiac defect or a very severe respiratory pathology and in such cases this indigenous CPAP may not be enough. Kindly consider intubating the baby and putting on ventilator or management as per need and protocol