Coffee Maker Repair ☕ Philips 3 lights error
Вставка
- Опубліковано 18 сер 2022
- This time I try myself at a coffee machine. The machine goes on and the coffee selection works but everytime I try to make a coffee the machine stops working and I get the 3 red errorlights.
- Наука та технологія
Thanks for the video, this is the exact reason I always go on UA-cam when life gives me a technical problem! ;) In our case there was a hard bean that blocked the grinder, the motor could not turn it anymore. Luckily no burnt motor. Cleaned the grinder that it turned free and reassembled it. And now sipping a fresh brew, with much satisfaction!
Hi, you need to use a Hex torx T10 screwdriver to get out the screws
This was a very useful video for me. Thankyou for making this and saving me the price of a new machine.
Thanks ! I managed to fix my coffee machine by replacing the motor with the help of this video ! 🙂
Thanks for making this video. It was very helpful. When I took the bean tray off, I discovered the screw holding down the motor had never been installed. Consequently, the funnel for the grounds had snapped off the grinder housing. i'm ordering a new one but used some rubber bands in the meanwhile to hold it on. The funnel was clogged because it had been misaligned. I cleaned everything out, put a screw in to hold the motor in place and reattached the tray. She's working like a charm all thanks to you.
The Screw was installed by myself, originally there isn't any screw. I thought it's the reason for my issue. Finally I decide to leave the screw because it's much more stable.
It turns out the motor for the burr grinder is bad and I ordered a new one. The little funnel that the grounds go into from the grinder is broken also. I ordered a new one but cannot figure out how to install it. Help!
@@JonMcCanless I can not understand what part you mean. Do you mean the black tube where the grinded beans pass into the machine?
@@technico5880 yes
@@JonMcCanless for that you have to take out the upper burr with its ring and than you can take out the funnel and install a new one
This is our second K-Classic. We had our first one for many years, so when we had to replace it, we wanted nothing else but this exact ua-cam.com/users/postUgkxBrV-RbF5Nk0Rlt9i15aao-YMzqzTG8Vf model. We use it for about three people everyday in the morning. The taste and quick brew is one of the reasons we like it so much. There are so many choices of brands of coffee that we would grab what was on sale and test the different brands from there. I would definitely recommend trying different brands of coffee to find the ones you like the most because there are brands that quite frankly taste horrible.
Thank you,your video helped me to repair my Philips EP 3243 and its working fully again :)
Thanks for this useful video! I was ready by the first step en now drinking finally after days my own coffee again! big thanks!
Thank you very much for details. Repaired my Phillips with replacing motor
thanks great video i hard about this problem alot but after watching your video i have no more 2nd thoughts going to buy one now
Thanks man, I fix my machines!❤❤
Σήμερα έβγαλε το σφάλμα με τις 3 λυχνίες, έβγαλα το καπάκι, αφαίρεσα το μύλο.
Γύρισα τον άξονα του μοτέρ πολλές φορές και βγήκε αρκετή ποσότητα καφέ μέσα από το μύλο που όπως κατάλαβα είχε κολλήσει. Χτυπούσα το μύλο στο χέρι μου έως να βγει όλος ο χοντροαλεσμένος καφές που είχε σφηνωσει, γύριζα τον άξονα και χτυπούσα. Τα τοποθέτησα όλα και η μηχανή δούλεψε.
Εχω τη μηχανή 2 χρόνια ακριβώς και σκέφτηκα ότι μια φορά το χρόνο να κάνω αυτό το καθαρισμό, ίσως προλάβω πιθανό κάψιμο του μοτέρ.
Ξανά άναψαν οι λυχνίες, το άνοιξα ξανά, πάλι δούλεψε, άγνωστο τι θα κάνει στη συνέχεια, πιθανό πρόβλημα μοτέρ.
Καμμια ιδέα;
You can open the coffee maker every time but I think it's frustrating after while. I recommend you to swap the motor out if possible.
you are helping in a general way....BUT, show the TYPE screw driver that you use. Then reveal WHERE you ordered the motor from! (you don't even say how long it took to receive the motor. That's how to expertly help others.
Thanks 😊for your wonderful video
Be aware that when you take the top off there are two plastic tabs in the front of the cover that fit into plastic loops of the front portion of the machine. You must push down where the cover meets the front, on the front section, to lower those loops thus freeing the tab and allowing the cover to slip off. If you don't do this and pull hard it will crack those loops. Not the end of the world but if you want to have those loops there so the tabs from the cover can snap into them follow my instructions.
Solid advice, thanks
thank you , it was very helpfull
Thanks for the video
same issue with me ...opened the tray and to my surprise, the screw along with the bass guide from the top cap fell into the grinder..it broke the whole ceramic grinder to pieces...But a new part is 10 times cheaper than a new machine :D
Hello. Where you buy new part ? I have same problem , but no idea where to buy
@@nijazhundur405 just search for 3rd party suppliers of phillips coffee machine parts, if you have the exact model you should be able to find the right part where you live.
Ich habe alles wieder zusammengebaut, aber muss man was beim Einbau des Mahlgrad verstellrad beachten?
Thank you!!
Awesome thank you ! Vielen Dank
That’s great that you fixed it, but you didn’t have to screw the coffee grinder to the body, it should freely move on it’s own place
Someone had disassembled this machine before you
Thank you dude ! You saved my life!! Btw, I already changed grinder and after few months I got same error.. I just ordered new grinder (original this time), hope it works for some time. As grinder + 2 extra parts is like 1/3 prize of the coffe machine... Did some1 face with same problem, that grinder worked just for few months ?? Edit; Is it possible that its coffee fault ? Or its just bad grinder ?
Thank you! This helped me a lot. I just took out every part, including the motor. There was a lot of coffee inside the machine, I cleaned all the parts and I put everything back, without replacing anything. It is working now. :) Question: where did you ordered the motor from? I searched for Philips parts but no success. Have a nice day!
You could have the same issue as my coffee maker have, it's only one specific winding of the motor that couse the error.
I do not order from Phillips. It was a smal supplier. I searched for the motor itself instead of Phillips parts.
@@technico5880 Thanks for the video. Do you have part number for the motor and who was the small supplier? My coffee mashie is still working, but I can hear the motor dying. I would like to order the replacement part in advance. Thanks!
@@zrokali I ordered this one: www.ebay.de/itm/304719144716?chn=ps&norover=1&mkevt=1&mkrid=707-159967-267642-0&mkcid=2&mkscid=101&itemid=304719144716&targetid=1325693166479&device=c&mktype=pla&googleloc=9041788&poi=&campaignid=12876320283&mkgroupid=125994436481&rlsatarget=pla-1325693166479&abcId=9300534&merchantid=114634027&gclid=Cj0KCQiAtICdBhCLARIsALUBFcE_ofevypq4fy8_rKW1Ok_5Bh5BTDDVv-qZPQvO1M9bvnr6u_Qj-zsaAjx3EALw_wcB
Thank you so much. It was very helpful! Could u tell me please what is the motor number so I can search for it ?
Any idea why the water tank light stays on even after filling the tank?
Helpful.
How exactly did you diagnose the motor as being bad?
How do you remove the black bit at 2:45 so easily, I cannot seem to pry it out even with tools.
There's a small clip. You have to press it down in order to remove the whole piece.
Where I can buy the new motor for the machine?
Thanks for the video Nico! One question please. What can I do in order to make the the grounding smaller then the minimum by default? Because it's not that small. Thanks again.
You're welcome. You can open the grinder and turn it manually into a tighter position in order to minimise the space between the grinding stones. But be careful to not overtighten it because you can demage the grinder.
@@technico5880 it is already at minimum.
My grinder works when it has no beens in it and only brews water in at cop. But when it has beens again it stops. Would you say it is the motor that is the problem?
Thanks
How do younknow the connection is burned and i wish you would show that in the video
Thx👍
Just for everyone with motor issues. In my case removing the blue capacitors on the motor solved the problem.
I have only one red light, the last one and the coffe machine d ont make nothing.
Just pull the tray out until the light stops flashing, then put the tray back in
Helpful 🎉
Hi friend, I have a machine like this, 3 lights come on, malfunction at first, no water comes out and does not give a choice for grinding coffee
Very thanks for you movie.
My problem was the upper grinding shoot clogged. I had to unscrew it from the motor and clean it.
What's the screw bit size to open up the machine?
T10 torx
Hi. Ich habe dein Video zu der Philips Kaffeemaschine auf UA-cam gesehen und habe das gleiche Problem. Hätte da aber noch eine Frage: wie kann ich feststellen, dass wirklich der Motor kaputt ist? Du sagtest da wäre etwas durchgebrannt. Wie kann ich das feststellen? Danke schon mal im Voraus :)
I have the same question, I dont want to buy new if this is not the problem
Qual o nível de moagem para um bom expresso? Acabei de comprar a minha no Brasil e estou fazendo testes😊
Honestly I am not a coffee drinker😅 but it depends on the coffee you want to have. I would prefer a stronger and more tasteful coffee therefore you should grind it smaller. In my opinion 4 to 6 is the best. For espresso better 3 to 4.
Aqui eu deixo no 7 um pouco mais grosso. Vai depender do seu grão e também a quantidade de água no café. O que mais gostei foi ou fazer no modo café 2 traços de café e o mínimo de água. No modo expresso ainda não me achei as vezes uso como segunda dose.
😍😍😍
Is there anyone who knows where the "'empty coffee ground container" light's sensor. My machine lights this error every time I powered it on so I can't use it. I think there must be a faulty sensor that detects that coffe ground continer is full.
If anyone knows please let me know.
My machine turned on and then shuts off and it wouldn't turn on again. It happened to me before, and then within an hour I was able to turn it on. But not today. What's the issue could be?
Bonjours, j'ai changer le moteur et nettoyer toute les pieces mais en allumant ma machine les 3 voyant directement. Rien ne passe
Do you know why the motor does that? I mean I checked mine and it looks good, carbon brusher are fine and the motor is easy to turn.. but I have the 3 red lights flashing every 2 to 3 days..
Thank you for this awesome video solved my problem for the movement only with the vacuum cleaner, hope to be only this.
Can you tell us the grinder spare part number and the place you buy it from, just in case ?
I got it from a noname seller, but it was an original part. I searched for Phillips (Coffee Maker Number) Grinder. For 35 Euros I got the whole part.
Hey, my coffee machine has the warning light continuously on. Nothing else happens, the tray is in the right position and is empty. The microswithc is working. Do you have any suggestion what can be the issue ? Thanks
Hey, I have a problem with my coffee machine. The 3 errors message directly appear after I turn on the machine. Do you know how to fix this ? Thanks for your help, Raphaëlle
Do you already tried to follow the steps in the video? Is the grinder free of beans?
I have same 3 flashing lights. What type of screwdriver did you use to open it?
It is torx t10
@@iwcok Torx 6 worked for me. Thank you.
is it same with TX 10?
Hi mine won't start up warning light stays on when you turn it on
WHAT IS THE TYPE OF THE MOTOR....HOW CAN I GET ONE ...IS IT AVAILABLE ON AMAZON OR EBAY ?????
Nice one, man! I am using EP2220. Do you know why the pre-ground coffee doesn't brew? Just getting water all the time. Finished decal and cleaning. All else works except grounds. Appreciate your answer!
Try dispensing hot water first using the pre-ground without any pre-ground coffee twice. Then try to make a coffee with pre-ground. If it does not work, try calling the philips customer service for coffee machines. 😊
Says repair but replaces the motor. Legit title.
What's the name of the part, or part number
What kind of screwdriver is needed to remove tray
I used a torx screwdriver but a hexagonal should works to.
@@technico5880the screw is too tight so I cant open it
Как перевести видео на русский
Can anyone help me how can I find this motor? How it's called? if someone purchased it where did you buy it from and what is the approx price of it?
I am not 100% but I think I ordered at that shop: www.shop-wittlich.de/p/mahlwerkmotor-philips-saeco-996530000317-11000513-421944049151-230v
@@technico5880 looks like it works. Somehow my grinder was full of with stoned coffee deep inside. It was hard to clean them but I did it and now it works well for almost 2 weeks. Thank you for your help! I hope I will not need the engine but I noted it in case of I will need it. Thanks!
it was enough to change the motor's carbon brushes ;)
Where did you order the brushes? What part number? Thanks.
Changed this motor and the problem persists. Even the boiler is not heating up. When turning on, coffee machine almost immediately starts blinking those 3 LEDs.
Hello, I have the same problem, did you find a solution?
@@rbfr1569 Yes, I found the solution. In my case both thermostats was not working. Heating element was not heating. I'm assuming that connector which goes after heating element broke and water damaged both thermostats. Changed thermostats and connector and coffee machine is working again.
@@xteam29 where is the thermostat located? I am having the same issue and it is not the grinder. It goes thru the 4 cycles then the 3 leds start to blink.
@@at612 There is two thermostats located on heating element. You can check those with multimeter in continuity mode.
@xteam29 do you have the part numbers for both thermostats?
😴 PЯӨMӨƧM
Where I can buy the new motor for the machine?
I am also looking for it, did you figure out at least how this motor called? Did you find it somewhere who is selling it?