🟢 DIY Motorized Camera Slider - Arduino Project 👉 FREE PLANS 👈
Вставка
- Опубліковано 8 сер 2020
- In this video i show you my homemade motorized camera slider controlled with Arduino Nano. Please like and share this video if you think it's helpful. Thanks for watching
All plans I ever made I collected in one place. Save this link for future - I will add new plans to this collection and don't forget to subscribe to my channel to stay tuned.
drive.google.com/drive/folder...
Support GRINwood:
PayPal: grinwooddesigns@gmail.com
Free Plans:
drive.google.com/file/d/1uQ3M...
Sketch:
drive.google.com/file/d/1fanv...
Circuit:
drive.google.com/file/d/13j3q...
Project components i bought online:
- Timing Belt:
www.aliexpress.com/item/32918...
- Bearings:
www.aliexpress.com/item/32962...
- Timing Pulley:
www.aliexpress.com/item/32950...
- Track guide wheels:
www.aliexpress.com/item/33038...
- Camera tripod ball head:
www.aliexpress.com/item/32827...
- Furniture nuts:
www.aliexpress.com/item/32871...
- Stepper motor + ULN2003 driver:
www.aliexpress.com/item/32706...
- Arduino Nano:
www.aliexpress.com/item/32664...
- Limit switches:
www.aliexpress.com/item/32966...
- Potentiometer:
www.aliexpress.com/item/40002...
Free plans woodworking videos:
• 🟢 My Homemade Table Sa...
GRINwood shop:
www.etsy.com/shop/GRINwood
Follow GRINwood:
/ grinwoodprojects
/ dakhnogregory
/ grinwooddesigns
/ grinwooddesigns
Music:
Композиция "Pop Metal" принадлежит исполнителю Audionautix. Лицензия: Creative Commons Attribution (creativecommons.org/licenses/....
Исполнитель: audionautix.com/
Clover 3 - Vibe Mountain
Parasail - Silent Partner .
Would you like to use my videos in your media projects?
Please contact me: grinwooddesigns@gmail.com - Навчання та стиль
For more details, read description to video. Please like it 👍 if you like it.
All free plans I ever made are here:
drive.google.com/drive/folders/1636_O_7KVQ5hzWAhDXBornWnvxXfweba?usp=sharing
GRINwood shop:
www.etsy.com/shop/GRINwood
Support GRINwood:
PayPal: grinwooddesigns@gmail.com
Thanks for watching
Thank you, @GRINwood. Great video. I just have one technical question. How camera's angle is controlled? Is it somehow centering itself by tripod ball head?
@@liveriesfsx9352 it's controlled with U-type profile on the bottom, just set up the profile. If it's parallel to rails camera will not turn, if diagonal - camera will follow the filming object, just set it up correct. Here i show how it works 12:50
Thanks
@@GRINwood
Thank you, I missed this detail.
Смотрю твои ролики и вспоминаю рабочих мужиков 50 -х - 80 годов, с которыми тогда работал сколько было рукастых изобретателей и рационализаторов.Сейчас таких как ты единицы.
Я поражен! Мало кто из тех, кого я знаю, способен подобное повторить. Аплодирую стоя!!! 👏
amazing from start to finish
Nice! I couldn't believe that this tiny stepper is strong enough to pull this.
Gran trabajo.. felicitaciones!👏👏👏
Gracias por compartirlo..
Saludos🙋🇦🇷
Perhaps best slider and construction thereof I have seen! The slider will not be replaced by the gimbal just yet!!
Excellent video and craftsmanship!
great and elegant job. thank you for sharing. Keep up creating.
Wow the slide is so smooth and clean.🙏🙏🙏
Excellent construction and final product. Thanks for sharing - it works great!
I guess im randomly asking but does any of you know a trick to log back into an Instagram account??
I was stupid lost my password. I would appreciate any tricks you can offer me!
@Alan Raphael instablaster ;)
Hello my friend! I want to say thank you for the sketch, you helped me out, health to you and your loved ones
Really cool idea and execution!!
Gute durchdachte Arbeit - Top 👍
Hello. Very cool project. Congratulations. As bonus, you added cool link with music for the video. Thanks.
Простой, Лучший, с Новизной. Благодарность!
Excellent work, just what I was looking for, I don't have access to your range of tools, but I'm sure I can adapt.
pretty cool! I ll try this too!
Very inspirational. Well done
Excellent construction and final product...
The best solution I ever seen
Sei un genio e complimenti!!
Thank you for making this video. I was amazed and entertained at the same time. 👍👍👍
Very cool!
eexxcelentttt!!!!!!!!
Awesome DIY project
Very impressive build! Nice video!
Nice design, thanks.
great job and very kill know how. deserves a like and sub. thank you for sharing your knowledge
Bravo çok güzel oldu
Excellent!
Je trouve la conception géniale, Bravo !!
Facile la prise en main de l'Arduino ?
Prends soin de toi et de toute ta petite famille.
Great. I need one.
Very cool ... good Job
Amazing 😍😍😍
I was watching this video purely out of curiosity and learned how to make my own "T" track. Thank you.
I noticed the t-track idea to build myself.
brilliant!
Very cool
verygood work ... verygood video ...
Best I've seen yet... When you write "Sketch" I think you mean "Program" or probably "Project".... only thing I'd add is that the anti-parralax guide rail ( for pointing at subject through the full travel of the slider) would need to have a slot instead of a hole at each end to accommodate the different length depending on the angle. If you want a pipe that doesn't bend you can use thin-walled steel pipe, no guide bearings necessary, super light... wouldn't it look good made of sheet metal instead of wood... very good design, Bravo!
great idea, only comment is on the sketch part. that's just what Arduino calls it's program.
Суппер видос! Суппер идея! Суппер реализация! Суппер мастерская!!!
Спасибо, Вадим!
Там три «п» должно быть
Good 👌
Классно!
Отлично!
Вы поняли для это нужно?
Super
Easy to do if you have the right tools, unfortunately most of us don't have access to a table saw and belt sander. Good Work Anyhow.
You can use hand tools instead
built something close to this. Same reverse switches but never could get the switches to work. If I use my hand to hit the switch it works because I am hitting the switch like on and off as in a tap. But the slider just touch the switch and alway just set there with the switch pushed in..... the slider will not go the other way until the switch is released.... How can i come this ?????
Your wiring is not correct for the switches.
Wow thes is amazing genius But a little complicated thanks Is it possible to make a moving spider less complicated than it?☺️😊
This looks awesome! How long did you make the pipes?
140cm. Thanks
😘❤
Nice, I have these components, I'll build something similar
I wish you good luck! Thanks for watching!
Good Job! I have some questions ... which references and quantities from, Bearings, Timing Pulley, Furniture nuts on AliExpress ?
Подскажи, такие короба ( для электроники) есть в продаже?
Just transferred some money - stay safe!
Все так, как обычно. Только подшипник поворота щныряет от стенки к стенке, а это тупик всей задумки. А решение ещё проще...
bonjour merci pour votre travail, pouvez vous me donner la référence de la boite pvc pour mettre le projet .
Делаю себе подобный слайдер, поворотную часть использовал не профиль а алюминиевую трубу.Заметил , что эти движки "дергаются" при работе .Это даже заметно по картинке.Nemo 17 в этом плане лучше мощные и работаю стабильно.Хотел обойтись без ардуино использовав готовую плату с аллиэкспресс, но при работе с Nemo 17 нет возможности регулировки скорости.Наверное придётся все-таки мудрить на основе ардуинки
Да, немного дергается из-за малой мощности движка, но если пустить каретку по склону, то все гладко.
@@GRINwood дергается больше всего что там стоит редуктор.Интересно если подключить nemo 17 по этой схеме? Драйвер выдержит?
horizontal required, or will work at any angle, up to vertical?
No, maximum 20 degrees slope, it has low power motor
I have a question. the slide is running. How Do your camera keep your model in the center of the frame?
LOve the video so i bought all the parts however when i goto your saved projects i don’t see the PDF in there for this project ? PLease HELP
what about a circular motorised camera slider? good job
possible in the future, thanks
What kind of blade do you use for cutting the alminum
aluminum is soft. the same blade you cut wood with will cut aluminum and not damage the blade
Сегодня пробовал собрать электрическую схему.Ардуинка не такая как у вас.Скетч на новых версиях программы залить не получилось.Залил через 1.0.1 .Все спаял по схеме.Короче драйвер двигателя вообще не моргает.Иногда когда замкну контакты на ардуинке начинают светится пару светодиодов, но сам двигатель признаков жизни не подаёт.Может подскажешь в чем проблема?
Буду наверно заказывать ардуинку как у тебя.
Hi can I use a 12v 28BYJ-48 or do I have to change another component of the schematic, or the arduino code? Thank you!
In the end I was able to try it because I had the components at home, and it worked great for me with the 12v one, that is, I had to separate the power supply in two and I put a Step Up
Thanks for the video!!
Yes I am now on the power... don't know how much power or where to get the USB power supply????
Sir I'm interested in your slider....
are you still using this? just curious. right now you can exchange the camera mount with A.i gimbal for auto tracking
I want order this modified auto slider ... how to contact you?
Buying a drone with a slider equivalent mode would seem less laborious and more flexible?
100% the wrong answer. I have 4 drones and never can get a simple but fast move like this. And what if you are shooting indoors or tight spots???? or in Washington DC.... or other NO FLY ZONE???? Parks.... Not debating with you at all, just letting you know some of the things I have already been through. I am hoping to build 3 of these..... What to buy some Drones???.....lol
Why do use so much shiplap?
Thank you for the project but i am having a problem uploading the Sketch to the NANO ? It When i validate the sketch it comes back with Void Setup Errors ? I checked each line and it is exactly like the Sketch you posted here .Can you help me out with this ? I appreciate your help. I have the mechanical portion already build and want to get it running and all I need is the Sketch to be loaded now . I did send you an e mail so if you could respond back with the correct Sketch i would appreciate it THANK YOU :) John
Did you get it to work?
Yes i did :) I
@@davidsalvador8591
how many price in india
Parchesing...
MacGyver Lives.
You sale this product???
Fichero Arduino dañado error
I WANT TO BUY SOMETHING LIKE THAT, PLEASE PRICE SHIPPING TO VIETNAM
Don’t use those push stickers on the table saw invest in something like Microjig Griper
Arduino code ?
Made of wood. Good for who don't have 3d printer.
Let me see if I've got this right... if I spend a couple hundred grand building and outfitting a professional quality woodworking shop and hire Norm Abram to teach me how to use all the equipment, I can then easily build this inexpensive DIY camera slider. Correct?
Did you say inexpensive????
They cheapest I've seen was about 300 and that was very short and no motor. Anything at this size plus a motor will run you 1 grand. So I am building me one ..... all part like under 150.... plus motor and a size you can't even get..... this video is amazing even after 50 watches.... lol
Peace and love always ✌️
🇵🇱 👍
Please sell this slide to me I will buy
донька краще складала)
I believe there is a mistake in the code
This line:
myStepper.step (direction);
actually it should be:
myStepper.step (direction * stepsPerRevolution);
Or leaving it like this, you should change:
if (flag == LOW)
direction = 1;
if (flag == HIGH)
direction = -1;
in
if (flag == LOW)
direction = stepsPerRevolution;
if (flag == HIGH)
direction = -1 * stepsPerRevolution;