2 videos in 2 days, a record I'm not gonna beat for a while. thanks for the patience with this series, almost, almost finished :) coasters, t-shirts & toolbelts: www.carlrogers.co
Absolutely gorgeous work, but I have to ask, why have you put blue tape over the brand name of your chop saw? And oddly enough you missed the brand name in one shot. Let’s face it, everyone knows what a Kapex looks like and who makes it, so I just thought it odd to see the names taped over. Clearly you might not be able to say, but I thought I’d ask anyway!
Luke 12:20 But LORD GOD JESUS CHRIST said to him: 'You fool ! This very night your soul will be demanded back , and whose will be the things you have prepared ?
Great video. High quality work. I suspect I was not the only watcher who winced when you put your hand into the circular saw recess to pull out the offcut.
Very rarely comment as I prefer lurking in the shadows but I have to say Carl your work and your videos is absolutely top notch mate. Kudos to you and your Dad for all your work mate.
Love your restoration work. Your attention to detail, craftsmanship and the mental gymnastics required to make it all work are a joy to watch. Thanks for putting it out for us all to watch!
Should have popped in a record between the under boards & staircase of when & how this restoration was done so people in 300 years' time would be as amazed as we are watching your work.
He could also have put some insulation between the underboards and the stairs to muffle the sound of the steps. Always good when you come home at night…
Looking good. You and your Pa make a good team. Couple of tips if you do not do this already. Get a block of beeswax and make a habit of treating sawblades and band saw and surfaces whilst working Oak and similar wood. Secondly especially at the end of the day, cramp your workpiece and chisel without your arm in the line of the blade. i.e try to chisel 2 handed as much as possible Sounds obvious but will save many a needless accident. Oak floor responds well when installing the joints tightly to a pre wax. Leave your glue only alter if it shifts naturally in the newel. Hope this helps. Stay safe and thank you for posting warts and all. That is reality in the workshop!.
You are a craftsman extraordinaire. (I am the third generation of a four generation of woodworkers.) Loved watching you mastering the staircase. Great job. Well done 🤎
As for marking the second pair of faces to cut on the band saw. Take the offcuts and tape one of them back onto the post, just wrap with masking tape. Then mark from the template onto those. You can also use hot glue etc.
Yep. I mark two sides when the post is whole and tack the pieces back on with hot glue. Much easier than trying to freehand the profile and it adds back _some_ of the support of the square post.
When you slipped the top newel into position my heart missed a beat. What a beautiful piece of craftsmanship. It looks fabulous. Those trees would be so proud to see themselves now! I love watching you both work - glad Dad's knee is doing well. I'm getting a Jackory! Yeay! Now all I need is some sun haha.
I had an old friend that was very well versed in wood working . From having his own saw mill to final finishing work. Watching your show has also taught me a lot. One old crafter once said the same thing, "it's not if you mess up, it's what you do with it." Always makes me wonder how it was done back in the day so well. Good video.
Fantastic video. excellent quality work. Note to everyone, when working with power tools ,don’t wear loose clothing. I managed to stop a 3000rpm router with a shirt that had come loose . I was routing a worktop using a jig and all I could see was clouds of material. I was so lucky, as all that was hurt was my shirt and my dignity. Keep safe and enjoy woodworking.
After constructing several log cabins, We've discovered that when using wooden pegs, it's better to use a wooden mallet (made from scrap) instead of a steel hammer. And if the pin is located where the mallet is awkward, a angled backing board can be used as an intermediary surface. Metal hammers can easily split or splinter even the hardest wood. But so far, looks great.
With these films you are really spoiling us. One of my favourite channels on youtube Carl. Best wishes to your Dad, I hope makes a full recovery from his knee surgery.
Opened youtube specifically to check if I didn’t miss any new video. And here it is uploaded 6 hrs. ago. And another one yesterday as a bonus! Awesome 🤩
I love your work! I'm so glad you still have an index finger (26:03). That's the only time I thought you might have done something "questionable". I'm not the safety police. But so glad you got away with that one. Keep up the excellent work.
You show as much skill as a woodworker in the reign of Louis XV. Good to see Dad back on his feet again now too. I enjoy seeing your work and your commentary + your humour. Thanks, Carl.
Thank you Carl, this is a wonderful video presentation of your restoration journey. That is a gnarly scar that your dad has from his knee replacement surgery. Trusting that he will continue to heal and regain the use of his knee without too much discomfort. Wishing you and your family a blessed autumn season filled with gentle weather and restful evenings. Peace brother.
Я думаю о том, что когда - то в будущем, кто - то так же будет снимать видео об этом доме, через 100 или 200 лет, и эта работа не канет в бездну. Очень круто, что человек, оставляет после себя такое наследие.. Так же как и мастера прошлого, которые сделали такую красоту.
All good. The best was the sound of the last tap on the top peg of the lower newel post. Different sound to all previous taps and it sounded like everything just became one on the last stroke. Magnificent countryside and quite spectacular drone footage. Thanks for all the hours of fascinating video. Cheers, David
Such a great channel 🙂. I admire all your attention to details and combining old techniques with new, and especially that you keep the originality and fabricate with oak wood. Its not easy to work with oak and create all those details.
As a fellow skinny person I appreciate that Slim very much. I use it on a ratchet belt that allows me to snug it up enough that the belt doesn't drag off me with the weight of all my tools. I can then hang my impact driver from the very back. Important considerations when working up a tall ladder. Brilliant staircase, Carl. All its' little imperfections add to its' charm and you'll be the only one to notice them as imperfections. The rest of us see character. The shakes might benefit from some bow tie graving pieces but those can always be done in place if they start to worsen. Cheers and see you soon.
You guys are seriously superb. I can spend hours watching you work. I just can't understand where you have acquired your exceptional skills at such a young age Carl?
Amazed at your attention to detail and yes if we are not making mistakes we are not learning. You have one amazing heart to restore something so beautiful.
At the beginning, when you were working on your decorative tops on the posts, you could have hot glued your off cuts back on. that way you have some what of a flat surface to trace on. BUT with that said, looks like you didnt need to do that! excellent work brotha man.
OIh my , what a present, please keep posting as often as this week please! I firmly believe your account should be over 1 million subcribers if you would post weekly
I’m so glad I found your channel. Your work is impeccable, and your editing is spot on. I can’t wait to see the stairs completed, but I will be sad when the whole project is finally finished. Thanks for keeping us entertained. Stay safe, and we’ll see you on the next episode. Thanks for everything, Carl.
I agree. It’s wonderful to watch a father and son creating such beauty with wood. I suggest you might want to watch Mr Chickadee. You will be totally blown away! Self taught, no power tools and no music or talking. So peaceful to watch and satisfying to watch his creations come together. His wife does the filming and you can put closed captions on for explanations of what he is doing. If you do watch I’d love to hear what you think 😊.
Thanks for posting and sharing. I am enjoying watching the staircase build. I am not saying that I hope it continues indefinitely, just that it is amazing to see how it is actually accomplished. Really nice workmanship.
I could watch good old carpentry/joinery skills all day. Very nice work Sir! I'm glad to see your Pops working with you after his surgery. You two make a good team! Stay Safe!!!
The quality of your work and the enormous patience you have is inspiring. Not sure I would have reached into the saw to pull those pieces out of the way though.
Hey Carl. Enjoying the beautiful craftsmanship of all your projects. I would say it’s very easy to make a zero tolerance throat-plate. I would hate to see you wind up with a nickname like Stubby!!
When cornering the shoulders you went back a couple of centimeters just to go over it again and even that bump out - thank you. Great atmosphere as always.
What a fantastic endeavour-you are a very skilled young man,having done the majority of the work on this staircase,yourself-Love your Jackery power pack-mist look at where I can get one of those !!
I like how you made the pattern to make the posts for the hand rails for the stairs. And taking off the shelve router bit and making it into what you need is awesome
Just a thought. When I'm using those little Brad nails I flatten the head on a bit of flat steel, railway line, hit the point, and hammer them in with the flattened head in line with the grain. Follow that up with a wet Q tip dabbed over it after punching, and it becomes virtually invisible with a minimum of filler.
2 videos in 2 days, a record I'm not gonna beat for a while. thanks for the patience with this series, almost, almost finished :)
coasters, t-shirts & toolbelts: www.carlrogers.co
Can we get a link for your new mobile ban saw?
Whats the new projekt?
Absolutely gorgeous work, but I have to ask, why have you put blue tape over the brand name of your chop saw? And oddly enough you missed the brand name in one shot. Let’s face it, everyone knows what a Kapex looks like and who makes it, so I just thought it odd to see the names taped over. Clearly you might not be able to say, but I thought I’d ask anyway!
Both vids were a great watch - thanks Carl
Luke 12:20
But LORD GOD JESUS CHRIST said to him:
'You fool !
This very night your soul will be demanded back , and whose will be the things you have prepared ?
Art doesn’t necessarily always need to come with a frame around …greetings from the Lot, your neighbours!
Tip for future… keep what you’ve already cut out and masking tape them back in place and draw on your template
Great video. High quality work. I suspect I was not the only watcher who winced when you put your hand into the circular saw recess to pull out the offcut.
Love all your stuff. You said new video before christmas... :)
Very rarely comment as I prefer lurking in the shadows but I have to say Carl your work and your videos is absolutely top notch mate. Kudos to you and your Dad for all your work mate.
To quote I love you man : This is AWESOME, This is AWESOME
This stairs session is absolutely stunning.
Made me feel better to hear, “if you’re not making mistakes you’re probably not learning”
Beautiful work!
@@cmmartti every mistake you don't commit to is not a mistake. How many mistakes do you recon you should catch before one materializes?
If you don't do anything, you will not make any mistakes.
Amazing work. Glad to see your Dad up and around after his surgery. I also had my right knee replaced 2 months ago.
Love your restoration work. Your attention to detail, craftsmanship and the mental gymnastics required to make it all work are a joy to watch. Thanks for putting it out for us all to watch!
Literally just finished the last video and 20 seconds later you've uploaded this one! Great.
😉
My heart nearly stopped when you put your hand so close to the table saw!
Should have popped in a record between the under boards & staircase of when & how this restoration was done so people in 300 years' time would be as amazed as we are watching your work.
It looks like Carl left a secret message under the stairs so maybe he included.😊
He could also have put some insulation between the underboards and the stairs to muffle the sound of the steps. Always good when you come home at night…
Stairs that heavy won’t resound like normal domestic stuff.
Woah two in 24 hours, thanks mate! Love ur videos, doing some renovation projects myself and am always inspired by what you lads are doing!
Looking good. You and your Pa make a good team. Couple of tips if you do not do this already. Get a block of beeswax and make a habit of treating sawblades and band saw and surfaces whilst working Oak and similar wood. Secondly especially at the end of the day, cramp your workpiece and chisel without your arm in the line of the blade. i.e try to chisel 2 handed as much as possible Sounds obvious but will save many a needless accident. Oak floor responds well when installing the joints tightly to a pre wax. Leave your glue only alter if it shifts naturally in the newel. Hope this helps. Stay safe and thank you for posting warts and all. That is reality in the workshop!.
What a commitment to fine craftsmanship.
Thank you
You are a craftsman extraordinaire. (I am the third generation of a four generation of woodworkers.) Loved watching you mastering the staircase. Great job. Well done 🤎
As for marking the second pair of faces to cut on the band saw. Take the offcuts and tape one of them back onto the post, just wrap with masking tape. Then mark from the template onto those. You can also use hot glue etc.
Was going to say the same thing
Yep.
I mark two sides when the post is whole and tack the pieces back on with hot glue.
Much easier than trying to freehand the profile and it adds back _some_ of the support of the square post.
@@dubioushumor9243 Yep everybody with a bit of time on a bandsaw. 🙂 A wonderfully flexible, under-appreciated tool.
Yes! Exactly what I was going to say.
Yep this, the hot glue gun is even better. 👍
Love watching the high quality of your work, no matter how massive the project may be! The renovation is already amazing.
When you slipped the top newel into position my heart missed a beat. What a beautiful piece of craftsmanship. It looks fabulous. Those trees would be so proud to see themselves now! I love watching you both work - glad Dad's knee is doing well.
I'm getting a Jackory! Yeay! Now all I need is some sun haha.
I had an old friend that was very well versed in wood working . From having his own saw mill to final finishing work. Watching your show has also taught me a lot. One old crafter once said the same thing, "it's not if you mess up, it's what you do with it." Always makes me wonder how it was done back in the day so well. Good video.
You are the 'Michelangelo' of carpentry!!! Such skills! It is fascinating to watch you at work.
Absolutely the best craftsmanship I have seen, thank you for sharing the journey.
Fantastic video. excellent quality work. Note to everyone, when working with power tools ,don’t wear loose clothing. I managed to stop a 3000rpm router with a shirt that had come loose . I was routing a worktop using a jig and all I could see was clouds of material. I was so lucky, as all that was hurt was my shirt and my dignity. Keep safe and enjoy woodworking.
This man must be over the top being able to do this restoration with his son. Looks really good WOW.
regarding to mistakes: You can make mistakes, but you must not repeat them. Great work (The stairs AND the video!)
For such a young man you’re really good at what you do. Can’t wait to see the finished staircase.
I'd love to impart these skills with my sons. Great job Carl, it really is a pleasure to watch all this.
You are an artist Buddy. Your father must be so proud.
27:00 it's nice to see a Polish accent on a foreign construction site :) greetings from Poland
After constructing several log cabins, We've discovered that when using wooden pegs, it's better to use a wooden mallet (made from scrap) instead of a steel hammer. And if the pin is located where the mallet is awkward, a angled backing board can be used as an intermediary surface. Metal hammers can easily split or splinter even the hardest wood. But so far, looks great.
I use a rubber mallet on chisels. Only need the beech wood version for heavy jobs.
My husband loves your youtube channel. I like your editing very good.
With these films you are really spoiling us.
One of my favourite channels on youtube Carl. Best wishes to your Dad, I hope makes a full recovery from his knee surgery.
That sir, is a thing of beauty.
Opened youtube specifically to check if I didn’t miss any new video. And here it is uploaded 6 hrs. ago. And another one yesterday as a bonus! Awesome 🤩
You are scaring me with that band saw
Sweet! 2 vids in 2 days . Feeling spoiled. 👍
I love your work! I'm so glad you still have an index finger (26:03). That's the only time I thought you might have done something "questionable". I'm not the safety police. But so glad you got away with that one. Keep up the excellent work.
When you were trimming those Floorboards on the table saw, All I could think about what happened to Nerdforge and her prosthetic little finger.
I like the way you go about it Carl . Your videos are no bs and appreciate the tips that you pass on 👍🏾🇦🇺
such craftmanship. reminds me of my grandpa, making a mill, wooden figures and all kind of stuff himself. Ur videos is so inspiring.
Great work!! You are a gifted carpenter and craftsman!! Thanks for sharing!
Came by for Carl’s fantastic craftsmanship, stayed for the ‘micro adjuster’. Cheers, mate - thanks for sharing your work with us!
You show as much skill as a woodworker in the reign of Louis XV. Good to see Dad back on his feet again now too. I enjoy seeing your work and your commentary + your humour. Thanks, Carl.
Your craftsmanship is beautiful to watch. Dedication!
awesome work mate! well done, the videos were amazing! thanks for sharing! 🙏🏻
When cutting shapes out of square stock just tape the offcuts back on so you have a flat surface for your template
These gentlemen possess SUPERIOR carpentry skills! ✨👍👏❤
Отлично! Береги себя,соблюдай технику безопасности.
Здоровья вашему папе.Спасибо за видео.
Wow, after month of work the result of staircase and room is so unbeliveable nice!!!
This staircase is nicer than anything i've ever seen and it's just the staircase
What a beautiful piece of work. The oak loos spectacular.. Great job Carl.
It is a real pleasure to see true Craftsmen at work. Keep up the great videos.
Stunning craftmanship 👏🏼👏🏼👏🏼👏🏼
Once again, woodwork morphed into carpentry. Absolute work of art.
Thank you Carl, this is a wonderful video presentation of your restoration journey. That is a gnarly scar that your dad has from his knee replacement surgery. Trusting that he will continue to heal and regain the use of his knee without too much discomfort.
Wishing you and your family a blessed autumn season filled with gentle weather and restful evenings. Peace brother.
I’m following you from Iraq and I like what you doing
Amazing job. I can appreciate the patience put into this job.
Я думаю о том, что когда - то в будущем, кто - то так же будет снимать видео об этом доме, через 100 или 200 лет, и эта работа не канет в бездну. Очень круто, что человек, оставляет после себя такое наследие.. Так же как и мастера прошлого, которые сделали такую красоту.
All good. The best was the sound of the last tap on the top peg of the lower newel post. Different sound to all previous taps and it sounded like everything just became one on the last stroke. Magnificent countryside and quite spectacular drone footage. Thanks for all the hours of fascinating video. Cheers, David
Such a great channel 🙂. I admire all your attention to details and combining old techniques with new, and especially that you keep the originality and fabricate with oak wood. Its not easy to work with oak and create all those details.
Pure artistry, my father would have loved to watch your skills and design.
As a fellow skinny person I appreciate that Slim very much. I use it on a ratchet belt that allows me to snug it up enough that the belt doesn't drag off me with the weight of all my tools. I can then hang my impact driver from the very back. Important considerations when working up a tall ladder. Brilliant staircase, Carl. All its' little imperfections add to its' charm and you'll be the only one to notice them as imperfections. The rest of us see character. The shakes might benefit from some bow tie graving pieces but those can always be done in place if they start to worsen. Cheers and see you soon.
You guys are seriously superb. I can spend hours watching you work. I just can't understand where you have acquired your exceptional skills at such a young age Carl?
Amazed at your attention to detail and yes if we are not making mistakes we are not learning. You have one amazing heart to restore something so beautiful.
Carl- thanks for this staircase series. I wish i could do a neat job like that. Thanks for sharing the ups & downs.
At the beginning, when you were working on your decorative tops on the posts, you could have hot glued your off cuts back on. that way you have some what of a flat surface to trace on. BUT with that said, looks like you didnt need to do that! excellent work brotha man.
The craftsman ship is simply magnificent ⚒️🔨🪚🍺
Thank you very much for yr videos. They are very nice to watch and with yr fun comments when the “shit hit the fan”😀😀😀
Back to back videos, you're spoiling us, thank you
Some real craftsmanship. WOW! 😮👌
never thought I'd have such a thing as my favourite sets of stairs in the world but between you guys and New Yorkshire Workshop I now do.
I love your channel, you do everything very professionally and with high quality, my respect to your industriousness
Lovely job mate. Your workshop must smell great with all that oak being cut, very distinctive
As ever, wonderful. Thank you.
You are becoming such an incredible craftsman and artist!
OIh my , what a present, please keep posting as often as this week please! I firmly believe your account should be over 1 million subcribers if you would post weekly
I’m so glad I found your channel. Your work is impeccable, and your editing is spot on. I can’t wait to see the stairs completed, but I will be sad when the whole project is finally finished. Thanks for keeping us entertained. Stay safe, and we’ll see you on the next episode. Thanks for everything, Carl.
I agree. It’s wonderful to watch a father and son creating such beauty with wood. I suggest you might want to watch Mr Chickadee. You will be totally blown away! Self taught, no power tools and no music or talking. So peaceful to watch and satisfying to watch his creations come together. His wife does the filming and you can put closed captions on for explanations of what he is doing. If you do watch I’d love to hear what you think 😊.
Great job, you and your dad make a good team.
Beautiful, handsome staircase. So enjoyable to watch. Thank you.
Well done lads. Thats one beautiful staircase and something to be proud of. Really enjoy your videos.
The most beautiful workmanship. Such a treat
Alright. Had Thanksgiving. Hung out with people. Had a few drinks and I get another video? Good day. Thanks man!
Thanks for posting and sharing. I am enjoying watching the staircase build. I am not saying that I hope it continues indefinitely, just that it is amazing to see how it is actually accomplished. Really nice workmanship.
Great videos! They are my zen videos to relax after a long workday. Just have to say that I got a bit nervous when you get that finger near the blade!
We are being spoilt. The staircase looks grand you must be so pleased with yourself. country side looks beautiful. Thanks again for sharing.
I could watch good old carpentry/joinery skills all day. Very nice work Sir! I'm glad to see your Pops working with you after his surgery. You two make a good team! Stay Safe!!!
Good for another 300 years!
The quality of your work and the enormous patience you have is inspiring. Not sure I would have reached into the saw to pull those pieces out of the way though.
I love watching this young man work hard and with attention to fine detail. This is something that we all need to do.
Keep up the good work!
Hey Carl. Enjoying the beautiful craftsmanship of all your projects. I would say it’s very easy to make a zero tolerance throat-plate. I would hate to see you wind up with a nickname like Stubby!!
24:00 carlrogers: completely, utterly solid
Amazing results. It's a work of art and a show of real skill.
When cornering the shoulders you went back a couple of centimeters just to go over it again and even that bump out - thank you. Great atmosphere as always.
What a fantastic endeavour-you are a very skilled young man,having done the majority of the work on this staircase,yourself-Love your Jackery power pack-mist look at where I can get one of those !!
The amount of patience and precision is truly amazing!❤
Back to back videos!!! Absolutely amazing! Thank you!
I like how you made the pattern to make the posts for the hand rails for the stairs. And taking off the shelve router bit and making it into what you need is awesome
¡Gracias!
Just a thought. When I'm using those little Brad nails I flatten the head on a bit of flat steel, railway line, hit the point, and hammer them in with the flattened head in line with the grain. Follow that up with a wet Q tip dabbed over it after punching, and it becomes virtually invisible with a minimum of filler.