The products are available at the manufacturing company GeBrax, Germany. For more information, see www.gebrax-abrasives.com square tube - miter grinding
I guess im asking randomly but does anybody know of a way to get back into an Instagram account?? I was dumb forgot the account password. I would love any assistance you can offer me.
so many people commenting in here that have never dealt with finish grade grain s.s. This is common practice per customer request to produce a aesthetic finish. This type of work is in a different ball game than normal welding and can be a pain in the add sometimes. Been doing this type of work for ten years and you have to have patience and a keen eye for detail.
It's fun to read all the comments of everyone who hasn't been in a food processing plant 🤣 whole different ball game gentleman. Remember; Bullies do what they do because they don't understand 😂
I would have liked and subscribed if 1) this uploader would have given details of the discs/ accessories he used and 2) if he had the courtesy to respond to the same questions people asked
Nice technique. Wouldn't it be a cleaner seam if you didn't to the masking until the last section. That way the brush marks would intersect instead of leaving a void area that didn't get grounded?
vicben1 Try Medium density unitized wheels. They can be dressed to fit the profile of the corner (using a dressing stick) and start with Coarse, then Medium and fine. Usually 150mm (6") diameter with a 25.4mm (1") bore but need a slower speed machine called fillet weld grinder. All corner welds can be made to disappear if you have the machines and abrasives. Sia do a guide called S4 which shows blending welds in all kinds of scenario's. I could scan this as a favour if you send your e mail address.
First of all, awesome video.. Sir, what things you hv used? I mean what is the name of these parts and from where will I get these parts,,,?? Plzzz rply... I wl wt....
Sam Harris The first stage is to grind the weld down to flush with the surface.Polishing the corner with aluminium tape along the seam is for esthetics.
*WOOW😮😳* *Is that TIG Welding?* Actually I want/need to make a table frame of square pipes after 2-3 years that's why I'm currently researching on square pipes and welding. _I'll put hardwood table top on that metal frame without fastening (since I want to seal the frame totally from outside to limit inside out corrosion)._ *Tell me the kind of welding done there...* I have heard that TIG welding is a slow process but the strongest and precise of all welding methods. *That's true, isn't it?* *FEW MORE QUESTIONS:-* *What kind of material that square pipes are made up of?* *Chromium Steel* (10% or more chromium content by mass) OR *Stainless Steel* (which one: 304, 316 or other) OR *High Carbon Steel* or *Medium* or *Low* OR Cast Iron or Mild Steel OR Other (mention its name) Since I'll white paint my entire table (frame + wooden tabletop), I hope that stainless nature of square pipes don't prevent me from doing it properly.🤔 *Is there ‘non - stainless’ version of those quality pipes of 304, high carbon steel, chromium steel, etc.?* I want my table to easily last longer than me for about 60 years at least. I do will paint it once every 3 years. *Painting every 3 years is correct, isn't it? Or should I reduce the years?* *What is the thickness of square pipes' material plate used? How many gauge or thickness in mm?* *Is 2-3mm thickness enough for me since I'll put maximum of 1000kgs weight load on it?* Mostly computers and battery backups. The table will be 6-8 feet long by 3 feet width by about 28-29 inches total height. *What is the ‘width’ of those square pipes?* 2-3 inch OR 4-5 inch OR Other (mention please) *_What a Grinding!!!👍🏽_* *_Excellent piece of ART👏🏽_* _Thanks man for making such a great video._ I'm from Jamshedpur, Jharkhand, India🇮🇳. I find nobody here in my region to do anything in that perfection. Therefore I probably will buy welding machine, cutter, grinder, etc. and make my table all but myself. I hope buying all those to cost me anywhere under ₹1 lakh (approximately 1500 USD). _I'm really lucky for this video to get in my recommendations & for me clicking and watching it.🍀🎋_
![[柴犬ASMR]曼玉Manyu&小白Bai 毛发护理Spa asmr](http://i.ytimg.com/vi/0TsXQ7z2Dh4/mqdefault.jpg)
Well done mate! Long time ago i used paper painting tape to secure scratches (satin), this learned me full controll my hand grinder :)
I'm a detailer for ornamental metal works. Always wondered how the shop finished up those mitered joints with a brushed finish. Nicely done!
Get your self i ddont knoe how its called buts its a rubber infused with ceramic abrasive is the best with scotch brite for final tuch ups :)
I somehow have been watching people clean metal for the past hour 😳
+Remoo oddly satisfying
Try to work like this you will lose your mind after 1 year. Neverending "chalenge yourself"
I use to grind seats for Metra trains n pace busses this jst made me feel some type of way now lol
I guess im asking randomly but does anybody know of a way to get back into an Instagram account??
I was dumb forgot the account password. I would love any assistance you can offer me.
@Noel Enoch instablaster =)
Nice attention to detail :)
Finally I found this tutorial video, Great job man, thanks for sharing!
Americans are good people and talents that help people with video ... America for life
Nicely done and great technique. I sometimes want to have that ultra sleek look after welding with my powertig.
Excellent work, for the grinder haters out there, some people like the seamless look
Excellent workmanship. I've got a very picky eye & I say this is immaculate.
so many people commenting in here that have never dealt with finish grade grain s.s. This is common practice per customer request to produce a aesthetic finish. This type of work is in a different ball game than normal welding and can be a pain in the add sometimes. Been doing this type of work for ten years and you have to have patience and a keen eye for detail.
So much extra time and effort. You are 100 percent right. It is almost as bad as dealing with paint
Loved it! Thank you very much!
Beautiful work ✌
Nice, i've always wondered how this process was done.
great work :-)
great work !
Great job, beautiful.
one snap and 2 thumbs up ...good job ...cool results
From where can i buy this material used for polishing
Great job bro
It's fun to read all the comments of everyone who hasn't been in a food processing plant 🤣 whole different ball game gentleman.
Remember; Bullies do what they do because they don't understand 😂
That was pretty sweet.
Wow that is a really nice finish. I've got some projects I want to weld with my everlast and I need a smooth finish.
Excelente video gracias por el conocimiento 👍
Slkoooooo muito top impressionadissimo manooo!!
Espectacular!!! :)
Very impressed, how do you treat the inner corner? is it much more difficult to polish than the flat surface?
Amazing job
Good job.
Nice video
Wow.. That is the best way of finishing
wish my joints would look like that! :)
Bery nice job, i see You from Querétaro México
wonderful job,
How will you do the inside corner? It was amazing wht u did..
Qual o nome de todas essas ferramentas gostei muito do trabalho parabens.Como se chama aquela fita pra fazer a marca no metalon?
What do you call that thin metal you used as a straight edge with adhesive on the back side?
Ur fired ,your helper left because he said you took to much time ,just to clean a 90 degree weld . Hahahaha
Attitude ! to make suface perfect! I am curious how do you polishing the inner angle?
Great Idea.
Perfeito 👍
Awesome 👏👏
really nice , and i just knowed how to do after cut and welding
we alwys do it the same way but we use a scrap piece of 1mm sheet metal an a clamp as cover.
Its ok but your life is easier when you start using this sort of tape
hypnotic film to say the least but that freaking music like getting stabbed with a pencil in the ears.
perfect, thanks
This has 2.3 Million views. Amazing :)
I would have liked and subscribed if
1) this uploader would have given details of the discs/ accessories he used and
2) if he had the courtesy to respond to the same questions people asked
But I like my stack of dimes xD
Xmas Zbigniew b mNZnv
so neat.
Very pretty
Good technique
how do you grind the inside weld with the same out come?
Nice technique. Wouldn't it be a cleaner seam if you didn't to the masking until the last section. That way the brush marks would intersect instead of leaving a void area that didn't get grounded?
Polimento é uma arte
All good on flat surface, what about the inner joints? But enjoyed the video.
Que bello trabajo admirable la tecnica
Best work
good job
Espetáculo. ...
Onde tem pra vender ...tirei o chapéu ...
Nice.
this is how expert work..very nice
btw..is that mig welder..??
thats a tig weld
Could you please list and specify the material you use so that I can order them from GeBrax? Thanks and congratulations for nice job!
Coul bon travail
if i polish weld then will metal not lose welding strength?
perfect
A E S T H E T I C S
라인도 이쁘게 잘 잡으셨네요
man I love Germans
Браво. ..красота
Our homeboi did a very nice lapin
Nice vidiis
awesome
amazing
Your hired! When can you start?
Wow.
Well come to iIndonesia
What about the inside corner?
Great video!
vicben1 Try Medium density unitized wheels. They can be dressed to fit the profile of the corner (using a dressing stick) and start with Coarse, then Medium and fine. Usually 150mm (6") diameter with a 25.4mm (1") bore but need a slower speed machine called fillet weld grinder. All corner welds can be made to disappear if you have the machines and abrasives. Sia do a guide called S4 which shows blending welds in all kinds of scenario's. I could scan this as a favour if you send your e mail address.
vicben1 that's the one I wanted to see how we did
theu prep the inside corner prior to welding...👌
pickleing paste always works for me
vicben1 fillet weld grinder
welds were done too hot. you shouldn't need to grind that much. it'll be easy to spot the concave it leaves.
Very cool but too many process in just a small part, must be very patient for steel welding
Мастер💪
25% complete
First of all, awesome video.. Sir, what things you hv used? I mean what is the name of these parts and from where will I get these parts,,,?? Plzzz rply... I wl wt....
Can you get this finish on regular steel, sprry noob question
Why do you go through all the trouble of removing the seam just to add it again?
Sam Harris The first stage is to grind the weld down to flush with the surface.Polishing the corner with aluminium tape along the seam is for esthetics.
If you didn't, you'd have to change the grain direction on the joining box section so it all lines up
Défense auto
Que material de acabamento e esse ?
hi were i have to ask for all this 4 products, were i buy it?
*WOOW😮😳*
*Is that TIG Welding?* Actually I want/need to make a table frame of square pipes after 2-3 years that's why I'm currently researching on square pipes and welding. _I'll put hardwood table top on that metal frame without fastening (since I want to seal the frame totally from outside to limit inside out corrosion)._
*Tell me the kind of welding done there...*
I have heard that TIG welding is a slow process but the strongest and precise of all welding methods. *That's true, isn't it?*
*FEW MORE QUESTIONS:-*
*What kind of material that square pipes are made up of?*
*Chromium Steel* (10% or more chromium content by mass)
OR
*Stainless Steel* (which one: 304, 316 or other)
OR
*High Carbon Steel* or *Medium* or *Low*
OR
Cast Iron or Mild Steel
OR
Other (mention its name)
Since I'll white paint my entire table (frame + wooden tabletop), I hope that stainless nature of square pipes don't prevent me from doing it properly.🤔
*Is there ‘non - stainless’ version of those quality pipes of 304, high carbon steel, chromium steel, etc.?*
I want my table to easily last longer than me for about 60 years at least.
I do will paint it once every 3 years.
*Painting every 3 years is correct, isn't it? Or should I reduce the years?*
*What is the thickness of square pipes' material plate used? How many gauge or thickness in mm?*
*Is 2-3mm thickness enough for me since I'll put maximum of 1000kgs weight load on it?* Mostly computers and battery backups.
The table will be 6-8 feet long by 3 feet width by about 28-29 inches total height.
*What is the ‘width’ of those square pipes?*
2-3 inch
OR
4-5 inch
OR
Other (mention please)
*_What a Grinding!!!👍🏽_*
*_Excellent piece of ART👏🏽_*
_Thanks man for making such a great video._
I'm from Jamshedpur, Jharkhand, India🇮🇳. I find nobody here in my region to do anything in that perfection.
Therefore I probably will buy welding machine, cutter, grinder, etc. and make my table all but myself.
I hope buying all those to cost me anywhere under ₹1 lakh (approximately 1500 USD).
_I'm really lucky for this video to get in my recommendations & for me clicking and watching it.🍀🎋_
Good
What products do you use to reach this finish?
ok. perfec.
anyone know how to make that grinder buffer thing at the end
It's a grainer, sometimes called a hand linisher, not custom made you can go out and buy them.
Nice yan ..san ba mabibili Yan idol ..yung pang stainless finishing idol puede bumili nyan tnx
와우 그라인더와 정석이네요
At 2:10 What is that? I need it but I don't know name it. Thank you and God bless you.
excuse me, can you help me? what tipe of metalic adesive use for the polish the corner? thanks you very much
Super
That is basically what I thought was the general method
Donde encuentro este tipo de lijas???
Qual o nome desta fita metálica que protege o metal?
Does this make the joint weaker?
what is the last step