Glad to see the drum can still be opened so you can replaced the bearings and bearing seal on these machine. Newer LG (2021) washer have now a sealed outer tub with sealant glue. You can’t disassemble the tub - you have to buy the whole tub assembly with bearings in one assembly. For those who have problems with mold and mildew on the door seal. The solution is (not being lazy) wipe down the door seal (with a clean rag) after each load is done and keep the doors open so they will dry out. Do not use too much laundry detergent ( 1 load should only take 2 tablespoons of HE laundry soap) do not put too much fabric softener or better yet do not use them at all. Excessive suds will collect at the spider arm and when they dry out and overtime it will build up just like the weights on the tires and will cause imbalance and will cause it to shake. Do not overload the machine. This will kill the shocks and also the bearing seal and bearings itself. Do use the clean tub cycle once a month (preferably right after your laundry load) while the suds are still not dried out.
I am picking one of these up this weekend from Home Depot. Their price was $648 and my local dealer wanted over $1100. I read a lot of negative reviews but it sure looks to be a good unit. Thanks for the video!
3:52 I have a 2004 Frigidaire front loading washer/electric dryer pair. Neither has needed anything, but now the washer is shaking quite a bit on spin cycle and the door rubber is looking a bit gross. Thinking about replacing with this unit. Or I could buy the bearing and door seal.
So excited to see you back! You should get the wm4500 when it comes out. Allso, I'd like to see an LG electric dryer and the parts. I'm also interested in how the heater controls the temperature on the normal cycle. I like the pancake motor in the washer!
@2:35 - after 3 years I've already had to replace the shocks due to balancing issues, not to mention both cold water and hot water inlet valves. Almost $300 in just parts in 3 years. I hate my machine.
Prepare to replace the drain pump in a few years, and then door boot when it will start to get moldy and leaky. Also shock absorbers do bust. edit oh wow a DC pump? LG finally replaced their junk AC pumps.
The new LG washing machine, like this one which is made in Vietnam is my country I'm from. Yes, it looks better but the water use could not be always enough to see, unless you hacked water level. Despite that what I see this looks so beasty! 😍🥰 In Vietnam they don't sell the massive LG front load washing machines, but the Twinwash model is, the highend models and the main one which is 21/12 kg washer dryer, not the Twinwash mini ones which can be called as the Sidekick models in USA. This is what I have just seen, this one which is made in Vietnam is not available here, just only made to export to USA only where most machines are massive as the 'standard' size. I wish this one could be also sold in Vietnam as actual
I just bought one of these babies! I had a Whirlpool front loader for many years, but eventually the gasket failed, the seal leaked, and the mildew started to take over. So I bought a Maytag top load HE. I can’t tell you how irrationally I hate that machine. It’s a lint machine that goes out of balance if you sneeze. No lint filter, of course. I’m giving it to my daughter, since she’s not as picky! I’ve heard a lot of good things about the LG models, especially the spin speed (the Maytag barely extracted any water), the delicate cycle (the Maytag chewed up my clothes), and the lint filter. Fingers crossed 🤞
Hi! Like the older LG units you could manually adjust the amount of water by taking the top off and adjusting a screw, do these units still have that same adjustment??
I would think it depends on what is being washed, cycle, load size, detergent. The Turbo Wash LG seem to be top notch all around performer as per Eugene's videos indicate. But some just love top loaders with agitation and deep water washes.
I would love to see how the Samsung flexwash 6.0 work if you have it in your store or you could get any videos on it I would love to see that because I'm planning or in the future to purchase it
Dang it, just watched and commented on your wm3500cw review thinking it was just the older version of this, of which I just bought a set of. I guess it doesn't matter (I'm still gonna watch the review of this) since they are on the way but, the reviews are thorough and entertaining.
Do any LGs have a balance ring? I'm wondering if they cut corners on the balance/suspension system on entry level models because folks are saying this model is bad at balancing.
That’s all the cycles you need any more is just fluff and unnecessary. More cycles is to impress customers into believing they’re getting more but they are such little variations. I’ve tested many machines with many different cycles and there’s hardly any difference between them. Now what you do get in a higher level Washer is a recirculation pump which does make a difference and is a definite plus.
@Isaac Joby John We would also like to have that feature and in fact do in all dishwashers. However since we have 110v it would cost twice as much to heat our water in our washers to do laundry unless adding an additional high amperage circuit but sometimes that could require replacing the entire service box which could cost thousands. Since both my washers and dishwasher are on the same line as a sink I start a hot water valve on a sink first until it becomes hot, turn it off and then start the machine so that all of the water that goes into the machine from the start of the cycle is at full temperature. In the case of my dishwasher I’ve noticed that it results in much shorter cycle lengths and no diminished results. That is because we use the hot water line as the tap for the dishwasher and the internal heater insures that the water rises to 150*F in a sani cycle and 140 normally. My own heaters are set to 150 and are solar heated so the internal heater in the dishwasher never activates hence the time savings.
I guess so but one thing that’s necessary in a front loader that’s only available on upper models is a heater. Well I mean it’s not necessary to get clean clothes but it’s a very very useful thing to have.
Does anyone know how to adjust the minutes on it . When I try putting it to do a normal wash it won’t let me see the minutes on the timer or adjust them please help me !!! .
How do you even know what a ufo landing sounds like??? Have you actually witnessed that?????? Tell me about it if you have!!! Actually i have heard that people who claim to have seen ufo's that they don't make any noise at all..
For North American front loader washers, they operate on 120V. It's clothes dryers, where if it operates on 240V, it's electric, and 120V for gas models.
It does a great job without a lot of water. You may be using too much detergent (most people do with front loaders) or not selecting the appropriate cycles for the wash. Just dumping in more water isn't going to help. Front loaders work the same way that hand washing an item in a sink does -- you don't stir the item around in the sink like a top loading agitator, you continually lift it up and down, in and out of the water. You don't need a whole ton of water to do that.
@@remycallieThis is absolutely incorrect. The low water level of this unit makes it awful. I am quite sure LG was "asked nicely" by some international body to use less water in their cycles to make them more environmentally friendly. For Godssake you can add not just 1, not 2, but *3* extra rinse cycles on this stupid machine. What took my old crappy Frigidaire machine half the time, got my clothes smelling clean... and by clean, I mean; they didn't smell like detergent, and the armpits didn't smell like BO right out of the wash like they do with my LG. This hunk of junk gets sold cheap to people who don't know the rub is that it doesn't use as much water as a more expensive model that people who have more money can afford. It's the same as anything else these days. Part of the "good deal" means you get a super efficient hunk of junk that doesn't do the one thing it's supposed to do--- get your clothes clean. Had I known this thing would be a polished turd I would've repaired my old machine. It wasn't perfect but it had a high water level setting that did a fantastic job *getting my clothes clean*. This isn't rocket science. It's soap, water, and agitation. Some moron at LG thought their stupid jingle would fool people into ignoring their eyes, nose, and common sense. It is so insulting to customers that the cycles take forever to complete... You and I know damn well some over paid exec thought, "We'll just agitate longer, and we can use half as much water and detergent, and still get the clothes as clean!" Actually, what this does is make a more concentrated amount of dirty water, which means your clothes are "bathed" in dirty water instead of "washed". When you take a bath, do you get just as clean if you put 3 inches of water in the tub, using your standard amount of shampoo, conditioner, etc?? Of course not. You'd have a concentrated mess at the bottom and that would be coating your body unless you then took a shower to rinse yourself off... OR, you could take a shower, and actually get clean. The bottom line is that this washer is a fraudulent lie. It insults customers to have LG paid bots come on forums like this and defend their crappy product to gaslight people into believing it's all in their head. LG has lost any future business from me, and I am telling everyone who asks to get something else, and to confirm they have a high water level wash option. Seriously, I reduce, reuse, and recycle plenty. But, it's humiliating to be a clean person, and to smell your own BO because your washer doesn't actually wash your clothes.
@@CalmBeforeTheStorm76 I have no idea where you're getting your information from. More expensive models do not use more water! (Like the poor people are getting cheated of water. :) More expensive models do tricks, like have a "steam" cycle. ) This is exactly how front loading washers work. My husband is European and this is pretty much all they have throughout Europe and this is how they work. I've had this model for six months now and it is working absolutely beautifully. With respect, a poor workman blames his tools. Learn how to use this.
If the default water level is like my LG WM2250CW model from 2012, it does not use enough water. I had clothes that stayed dry, because clothes weren't tumbling around, and I did not overfill my machine either. This machine fills exclusively by sending the water to the shell, and fill through a rising effect. My Frigidaire front loader from 1999 sprayed the water directly into the tub, onto the clothes, and would saturate the clothes as it fills. The basic LG instead requires the clothes to absorb the water from the bottom of the tub, and must continuously tumble, hoping it saturates all the clothes. If the water level is set too low, then clothes won't be fully saturated. I literally had to have the water level adjusted, just so it would use more water. If it filled with water like my first front loader washer, maybe it would have done a better job. LG models with the Turbo Wash, has a recirculation pump, that still sends the water to the shell, but once it reaches a certain level, it recirculates the wash water, and sprays the clothes continuously, instead of just long enough to saturate the clothes. All other models from different washer makers, use a combination of filling directly into the tub, and spray with a recirculation pump, until the clothes get saturated with water, before relying on just the tumbling action of the drum to get clothes clean.
Fort Collins Mike I purchased 3400cw a month ago (still waiting on delivery) because it was one of the few washers I could find in stock. I wanted the 3500 but could not find anywhere here in Massachusetts 😩. I hope this machine works out for me
@@Bunkysworkshop Yep I agree. These new washers many use load sensing so if there is no load there is far less water. Note: I found a hack on LG washers which there is actually a control unit for water levels which one can increase under the hood. However it most likely would void any warranty. But the person on UA-cam who did the hack did increase the overall water in the LG front loader to his liking.
Glad to see the drum can still be opened so you can replaced the bearings and bearing seal on these machine. Newer LG (2021) washer have now a sealed outer tub with sealant glue. You can’t disassemble the tub - you have to buy the whole tub assembly with bearings in one assembly. For those who have problems with mold and mildew on the door seal. The solution is (not being lazy) wipe down the door seal (with a clean rag) after each load is done and keep the doors open so they will dry out. Do not use too much laundry detergent ( 1 load should only take 2 tablespoons of HE laundry soap) do not put too much fabric softener or better yet do not use them at all. Excessive suds will collect at the spider arm and when they dry out and overtime it will build up just like the weights on the tires and will cause imbalance and will cause it to shake. Do not overload the machine. This will kill the shocks and also the bearing seal and bearings itself. Do use the clean tub cycle once a month (preferably right after your laundry load) while the suds are still not dried out.
It's great to see you back Eugene
I am picking one of these up this weekend from Home Depot. Their price was $648 and my local dealer wanted over $1100. I read a lot of negative reviews but it sure looks to be a good unit. Thanks for the video!
same here
@@hippa2dahoppa2 Me too!
How do you like it so far?
3:52 I have a 2004 Frigidaire front loading washer/electric dryer pair. Neither has needed anything, but now the washer is shaking quite a bit on spin cycle and the door rubber is looking a bit gross. Thinking about replacing with this unit. Or I could buy the bearing and door seal.
So excited to see you back! You should get the wm4500 when it comes out. Allso, I'd like to see an LG electric dryer and the parts. I'm also interested in how the heater controls the temperature on the normal cycle. I like the pancake motor in the washer!
Thank you for your video! So helpful for me as we're considering buying this model for our new home.
You buy it? how's it doing?
mine is vietnam made, came with a big dent from factory (do not see any damaged on the box). so far it runs ok ...
@2:35 - after 3 years I've already had to replace the shocks due to balancing issues, not to mention both cold water and hot water inlet valves. Almost $300 in just parts in 3 years. I hate my machine.
Prepare to replace the drain pump in a few years, and then door boot when it will start to get moldy and leaky. Also shock absorbers do bust.
edit oh wow a DC pump? LG finally replaced their junk AC pumps.
The new LG washing machine, like this one which is made in Vietnam is my country I'm from. Yes, it looks better but the water use could not be always enough to see, unless you hacked water level. Despite that what I see this looks so beasty! 😍🥰 In Vietnam they don't sell the massive LG front load washing machines, but the Twinwash model is, the highend models and the main one which is 21/12 kg washer dryer, not the Twinwash mini ones which can be called as the Sidekick models in USA. This is what I have just seen, this one which is made in Vietnam is not available here, just only made to export to USA only where most machines are massive as the 'standard' size. I wish this one could be also sold in Vietnam as actual
I just bought one of these babies! I had a Whirlpool front loader for many years, but eventually the gasket failed, the seal leaked, and the mildew started to take over. So I bought a Maytag top load HE. I can’t tell you how irrationally I hate that machine. It’s a lint machine that goes out of balance if you sneeze. No lint filter, of course. I’m giving it to my daughter, since she’s not as picky! I’ve heard a lot of good things about the LG models, especially the spin speed (the Maytag barely extracted any water), the delicate cycle (the Maytag chewed up my clothes), and the lint filter. Fingers crossed 🤞
How do you still like it ?im looking now to buy one
@@paulstanley3265 So far, I LOVE it!
Where’s the location of the screw that you turn to change the amount of water it can add?
Love the videos you are the only reason I'm going to purchase lf washers but in Chicago I'm finding a hard time to find 3500 combo
Hi! Like the older LG units you could manually adjust the amount of water by taking the top off and adjusting a screw, do these units still have that same adjustment??
In your opinion what washer would do a better job? This LG or the original top load speed queen or the front load speed Queen washer.
I would think it depends on what is being washed, cycle, load size, detergent. The Turbo Wash LG seem to be top notch all around performer as per Eugene's videos indicate. But some just love top loaders with agitation and deep water washes.
Thanks for making this video. Looking forward to seeing this washer with clothes. Is the tube slanted?
I would love to see how the Samsung flexwash 6.0 work if you have it in your store or you could get any videos on it I would love to see that because I'm planning or in the future to purchase it
Where can I find the series you mentioned about repairs for this machine?
Dang it, just watched and commented on your wm3500cw review thinking it was just the older version of this, of which I just bought a set of. I guess it doesn't matter (I'm still gonna watch the review of this) since they are on the way but, the reviews are thorough and entertaining.
Do any LGs have a balance ring? I'm wondering if they cut corners on the balance/suspension system on entry level models because folks are saying this model is bad at balancing.
Yup! i just installed one and its jumping allover the place on final spin.
@@Interstellarren did you take shipping bolts out?
do u find the spider thing behind the drum tend to rot on these new washers?
i wanted to see the back before you ripped it apart lol. i need to see where the cord is
That’s all the cycles you need any more is just fluff and unnecessary. More cycles is to impress customers into believing they’re getting more but they are such little variations. I’ve tested many machines with many different cycles and there’s hardly any difference between them. Now what you do get in a higher level Washer is a recirculation pump which does make a difference and is a definite plus.
So true!
Completely agree Peter
Dad use to say the more features you add, the more things there are to break.
Bruce Solomon yes Bruce mine said the same thing. LOL.
@Isaac Joby John We would also like to have that feature and in fact do in all dishwashers. However since we have 110v it would cost twice as much to heat our water in our washers to do laundry unless adding an additional high amperage circuit but sometimes that could require replacing the entire service box which could cost thousands. Since both my washers and dishwasher are on the same line as a sink I start a hot water valve on a sink first until it becomes hot, turn it off and then start the machine so that all of the water that goes into the machine from the start of the cycle is at full temperature. In the case of my dishwasher I’ve noticed that it results in much shorter cycle lengths and no diminished results. That is because we use the hot water line as the tap for the dishwasher and the internal heater insures that the water rises to 150*F in a sani cycle and 140 normally. My own heaters are set to 150 and are solar heated so the internal heater in the dishwasher never activates hence the time savings.
I guess so but one thing that’s necessary in a front loader that’s only available on upper models is a heater. Well I mean it’s not necessary to get clean clothes but it’s a very very useful thing to have.
If this and the 3500 are priced the same on sale is it a no brainer to get the 3500 or am i missing something?
Request: Can you do a comparison between a old school machine and a high efficiency machine side by side plz
Personally I'd love to see a front load washer 'Mexican standoff' featuring LG/Samsung/Whirlpool (or Maytag, Electrolux, or GE).
The Muffin Man lol
Are there any differences in parts compared to the 3500?
a pretty good front loader that LG makes.
Great video! Thank you
Welcome back
Is the door reversible on the washing machine?
Nice to your face again!
How do you adjust the song alarm volume for when the cycle ends?
Can u by and review the lg titan c on the lg laundromat website please
need better lighting. Trying to see where a strap is suppose to be attached on my defective unit.
I noticed our wm3400cw gets warm to the touch on the top right edge over the control panel from front to back.
Anybody experience this with their LG ?
How long would you expect this machine to last?
my last LG lasted 10 years
@@WKaliberr How many repairs, and what was repaired in that 10 years ?
@@iamtheiceman The water pump replaced
My grandparents had lgs that lasted 16 years, so 15 years or so depending how hard it’s used and how well it’s maintained
Do you recommend this LG or the GE GFW550 If the price was the same. My main concern is reliability.
absolutely the lg
Does anyone know how to adjust the minutes on it . When I try putting it to do a normal wash it won’t let me see the minutes on the timer or adjust them please help me !!! .
Soil level adjusts Wash time in minutes. it won't give you a time estimate until it senses the size of the load (for more accuracy)
It sounds like a UFO landing when it's slowing down!
"It sounds like a UFO landing" ... What does anal probing sound like?
How do you even know what a ufo landing sounds like??? Have you actually witnessed that?????? Tell me about it if you have!!!
Actually i have heard that people who claim to have seen ufo's that they don't make any noise at all..
It’s great except don’t wash your shoes in it. It will completely melt away the glue even on tap cold and delicates
Is this 110v or 220v. Thanks for the review!
For North American front loader washers, they operate on 120V. It's clothes dryers, where if it operates on 240V, it's electric, and 120V for gas models.
Does anyone else find this machine doesn’t use much water. The clothes are not getting clean. It driving me crazy.
It does a great job without a lot of water. You may be using too much detergent (most people do with front loaders) or not selecting the appropriate cycles for the wash. Just dumping in more water isn't going to help. Front loaders work the same way that hand washing an item in a sink does -- you don't stir the item around in the sink like a top loading agitator, you continually lift it up and down, in and out of the water. You don't need a whole ton of water to do that.
@@remycallieThis is absolutely incorrect. The low water level of this unit makes it awful. I am quite sure LG was "asked nicely" by some international body to use less water in their cycles to make them more environmentally friendly. For Godssake you can add not just 1, not 2, but *3* extra rinse cycles on this stupid machine. What took my old crappy Frigidaire machine half the time, got my clothes smelling clean... and by clean, I mean; they didn't smell like detergent, and the armpits didn't smell like BO right out of the wash like they do with my LG. This hunk of junk gets sold cheap to people who don't know the rub is that it doesn't use as much water as a more expensive model that people who have more money can afford. It's the same as anything else these days. Part of the "good deal" means you get a super efficient hunk of junk that doesn't do the one thing it's supposed to do--- get your clothes clean. Had I known this thing would be a polished turd I would've repaired my old machine. It wasn't perfect but it had a high water level setting that did a fantastic job *getting my clothes clean*.
This isn't rocket science. It's soap, water, and agitation. Some moron at LG thought their stupid jingle would fool people into ignoring their eyes, nose, and common sense. It is so insulting to customers that the cycles take forever to complete... You and I know damn well some over paid exec thought, "We'll just agitate longer, and we can use half as much water and detergent, and still get the clothes as clean!" Actually, what this does is make a more concentrated amount of dirty water, which means your clothes are "bathed" in dirty water instead of "washed".
When you take a bath, do you get just as clean if you put 3 inches of water in the tub, using your standard amount of shampoo, conditioner, etc?? Of course not. You'd have a concentrated mess at the bottom and that would be coating your body unless you then took a shower to rinse yourself off... OR, you could take a shower, and actually get clean.
The bottom line is that this washer is a fraudulent lie. It insults customers to have LG paid bots come on forums like this and defend their crappy product to gaslight people into believing it's all in their head. LG has lost any future business from me, and I am telling everyone who asks to get something else, and to confirm they have a high water level wash option. Seriously, I reduce, reuse, and recycle plenty. But, it's humiliating to be a clean person, and to smell your own BO because your washer doesn't actually wash your clothes.
@@CalmBeforeTheStorm76 I have no idea where you're getting your information from. More expensive models do not use more water! (Like the poor people are getting cheated of water. :) More expensive models do tricks, like have a "steam" cycle. ) This is exactly how front loading washers work. My husband is European and this is pretty much all they have throughout Europe and this is how they work. I've had this model for six months now and it is working absolutely beautifully. With respect, a poor workman blames his tools. Learn how to use this.
If the default water level is like my LG WM2250CW model from 2012, it does not use enough water. I had clothes that stayed dry, because clothes weren't tumbling around, and I did not overfill my machine either. This machine fills exclusively by sending the water to the shell, and fill through a rising effect. My Frigidaire front loader from 1999 sprayed the water directly into the tub, onto the clothes, and would saturate the clothes as it fills. The basic LG instead requires the clothes to absorb the water from the bottom of the tub, and must continuously tumble, hoping it saturates all the clothes. If the water level is set too low, then clothes won't be fully saturated. I literally had to have the water level adjusted, just so it would use more water. If it filled with water like my first front loader washer, maybe it would have done a better job. LG models with the Turbo Wash, has a recirculation pump, that still sends the water to the shell, but once it reaches a certain level, it recirculates the wash water, and sprays the clothes continuously, instead of just long enough to saturate the clothes. All other models from different washer makers, use a combination of filling directly into the tub, and spray with a recirculation pump, until the clothes get saturated with water, before relying on just the tumbling action of the drum to get clothes clean.
I suggest the turbo wash models, as they throw water on clothes then
I wish the manufacturers would give us a button to defeat the ECO crap, and let us define how much water we would like to use.
does this washer have wifi?
You don't need wifi to do laundry. It's an expensive gimmick.
When did you see it for $550?
Fort Collins Mike typically Black Friday or July 4 sales. Generally you will have to buy the set to get that low
Best Buy has it on sale for $629 right now. Home Depot $628
@@sbettieross1490 The 3500 is the same price I guess that would be a better choice
Fort Collins Mike I purchased 3400cw a month ago (still waiting on delivery) because it was one of the few washers I could find in stock. I wanted the 3500 but could not find anywhere here in Massachusetts 😩. I hope this machine works out for me
$750 sale at Lowe's at the moment.
Barely any water.
Retrobytes I would guess that no clothes in the washer so not much water.
@@Bunkysworkshop Yep I agree. These new washers many use load sensing so if there is no load there is far less water. Note: I found a hack on LG washers which there is actually a control unit for water levels which one can increase under the hood. However it most likely would void any warranty. But the person on UA-cam who did the hack did increase the overall water in the LG front loader to his liking.