DOA WZRELB Fixed! - Inverter Repair and "Will It Fail" testing.

Поділитися
Вставка
  • Опубліковано 18 жов 2024

КОМЕНТАРІ • 22

  • @budmartin3344
    @budmartin3344 Рік тому +1

    Great video. BTW, that small white box is the remote receiver, I guess the seller did not give the Remote controller that comes with it. I have this 3000W 12V inverter (without remote version) running 24/7 since Sept 2020 and still working great, just have watch out for bad filter caps that tend to fail and you will see it has domed top.

  • @aubreyj.tennant1123
    @aubreyj.tennant1123 Рік тому

    I just bought this model a week ago. I guess I got a deal @ $220. Very useful info!
    🙏🏼 😊

    • @natesdiysolar
      @natesdiysolar  Рік тому +1

      It's actually a decent unit. Is yours the newer version or older version. The older one seems to be more efficient as far as when the fans come on. I want to do a comparison video of new vs. old.

    • @aubreyj.tennant1123
      @aubreyj.tennant1123 Рік тому +1

      I think it’s older. Black in color, not blue and no remote switch. I haven’t tried it yet.

    • @natesdiysolar
      @natesdiysolar  Рік тому +1

      @Aubrey J. Tennant I have both units. I'll have to open them up now and see. I think the newer one is the smaller black one with integrated heat sink.

    • @aubreyj.tennant1123
      @aubreyj.tennant1123 Рік тому +1

      Okay, so you think the black is the newer one? I look forward to you comparing the two!
      Thanks

    • @natesdiysolar
      @natesdiysolar  Рік тому +1

      @Aubrey J. Tennant I do just based on size, though, lol. Typically, newer means small, more efficient components.. other than that, I'm just guessing at this point..

  • @curtchase3730
    @curtchase3730 Рік тому +1

    Was that replacement 40a fuse from the spare fuse package? Take one of the spare Chinese fuses and actually run current through it using a calibrated resistive load. I found these cheap fuses have horrible tolerances. I've tested cheap fuses rated @ 5a that did not blow until 20a was passed through them for several minutes! Try the test again using a genuine BUSS or Little Fuse brand.

    • @natesdiysolar
      @natesdiysolar  Рік тому

      Wow, that is crazy. Yes, this was the supplied replacement from the manufacturer. I'll have to try that. Thanks for the info.

  • @wildchildworld7858
    @wildchildworld7858 2 місяці тому

    I have the same problem with 115 volts or 120 volts not showing in the display. As far as I can tell no bad capacitors. What if all the fuses are good? What to troubleshoot next?

    • @natesdiysolar
      @natesdiysolar  2 місяці тому

      Probably the power MOSFETS . There are lots of videos showing how to test them. Also, check if there is a repair kit for that unit. Oftentimes, they have repair kits with common parts that go bad.

  • @WiSeNhEiMeR-1369
    @WiSeNhEiMeR-1369 Рік тому +1

    HOWdy N-DIY-S, ...
    Thanks for the REPAIR Video
    COOP
    the WiSeNhEiMeR from Richmond, INDIANA
    ...

  • @Code_hack_
    @Code_hack_ Рік тому

    Great video! How much did you pay for that inverter? Did the listing mention that it wasn’t working?

    • @natesdiysolar
      @natesdiysolar  Рік тому

      $200. The listing said it was working..

    • @Code_hack_
      @Code_hack_ Рік тому +1

      Great score! Love your content. Thanks for sharing

    • @natesdiysolar
      @natesdiysolar  Рік тому

      ​@@Code_hack_ thanks
      That means a lot :)

  • @Hoopsy78
    @Hoopsy78 5 місяців тому

    Hi I have the same inverter 1 trim Pot for voltage what is the other trim pot for mate?

    • @natesdiysolar
      @natesdiysolar  5 місяців тому

      I would have to look, but my guess is that it's the output frequency in HZ adjustment.

    • @Hoopsy78
      @Hoopsy78 5 місяців тому

      @@natesdiysolar cheers for that I turned it a bit but it didn't change the Hz so who knows hey would be nice to know though hey

    • @natesdiysolar
      @natesdiysolar  4 місяці тому

      @@Hoopsy78 bummer.. sorry about that...