I got my pitaka last night this morning trying to take it off I couldn’t it so tight that I felt like I was scratching my iPhone and I liked the case but why would he say easy to remove but it’s not
@@MonkeyDLuffy-nh7jg Maybe due to slight variations in manufacturing production runs, given that these minimalist cases are built to tight tolerances, and maybe also differences in ambient air temperature making them more flexible in warmer locations, and the corollary being less flexible in cooler locations.
Using the Benks ArmorAir and have used the Pitaka one as well. I can say the Benks with booty covers is really a game changer. I am more confident of rocking it on daily than the Pitaka.
Took a while to arrive from China. The case is fine if you plan on using it during a dinner night here and there but as a daily it doesn’t hold up. The coating on the back is peeling off pretty bad after 2 weeks. For what it is i think 20 would’ve been a better price.
2 of my absolute favorite thin cases! Both are so good, but that Benks takes it for me because of those closed bottoms. Great video bro! Also, tightness 👀
I got my Benks and it didn’t fit well at all. Phone moving all around inside of the case. Had to add thick stickers on the inside. Also it fell back from being propped up against my brick wall outside and created all of these bubbles almost like the phone is covered in a layer of plastic. Other than that it was a good looking case. I have the Pitaka now and it fits perfectly and feels like much higher quality Aramid. Enough coverage on the top and bottom too to avoid scratches.
Ahh that’s unfortunate. I have two Benks Airs and they fit amazing and I can understand about the aramid quality. Pitaka does seem to edge Benks with the quality.
My Opinion on the 15 pro max, best combo is the Benks armor air plus the flolab screen protect with the 3D edge so the screen melts into the edges of the case. It’s the ultimate. Plus I added red spigen camera lenses covers and it looks 👌🏼
I bought the benks and the bottom part started folding out within 2 days of usage, I have been trying to contact them to see if they have any warranty and haven’t get any answer back, honestly I’ll not recommend it
I have the armor air case on the way to try. I had the magez case a few months ago, but returned it. Just a little to minimal in the protection department.
Just got my Benks today. It was not as a tight fit on the top half. Bottom half is good snug fit. And the metal rind around the camera rattles. You think my case is a lemon.
I have the Pitaka but love everything about the Benks except the smooth sides. I really wish Benks would put the weave all around like the Pitaka and get rid of the smooth sides.
I have Benks armor air, the apple leather case have less weight and screen protection and buttons metal. It’s the case with the best protection under 30gr.
I order the magclap air on the website and man it take so long for delivery or maybe I’m just impatient idk hope delivery will be a little more quick to the USA
Love these Battle videos. A good Battle would be between Andar Aspen & the Nomad Horween. I’m on the fence about which one to get later this year when I upgrade to the 15 PM 🤷🏻♂️⚖️
Hey Tee, could you check the thickness on both 600D Pitaka and Benks cases with a caliper, or maybe putting them in landscape on a table and check their height. I’m going for the narrowest. Thanks a lot
You Forgot to mention that Benks Armor Air is a company directly from China And this shipments takes some time or never get your package. Just a warning to all who see this video. As a blogger you should mention this to your subscribers....... I placed an order and with any luck hope this package arrives from China.........
I work at a auto body shop as a painter. I have a bulky otter box case. And i trust that case because I can drop it and won’t do any damage. But I wanted to change the case to a case that has PROTECTION. I don’t how I feel about the thin cases because of how expensive the phone is. Also wanna case that’s comfortable on your fingers or hands. What case do you y’all recommend?
First: 💪🏿💪🏿💪🏿 As the super mega Pitaka fan on the channel (yes, I am claiming that title), I LOVED this review. I know the Benks is heavier, but I swear you can't feel the difference. For me, the Pitaka case has taken a huge step back from the 13 series. What won me over with the Benks is that the aramid fiber doesn't seem to show the finger grease as easily as the Pitaka cases have, the price of benks being cheaper, and the fact that THE BALD HEAD AND THE BOOTY IS COVERED! Great video as always!
The battles are back! This is great, Tee! I love the AmorAir myself, particularly for the function and price!
Yeah man trying to bring them back for sure. Hate I even went away from them.
Your videos anger me. You keep finding cases I want to get. Now I spend more money
I got my pitaka last night this morning trying to take it off I couldn’t it so tight that I felt like I was scratching my iPhone and I liked the case but why would he say easy to remove but it’s not
@@MonkeyDLuffy-nh7jg Maybe due to slight variations in manufacturing production runs, given that these minimalist cases are built to tight tolerances, and maybe also differences in ambient air temperature making them more flexible in warmer locations, and the corollary being less flexible in cooler locations.
Using the Benks ArmorAir and have used the Pitaka one as well. I can say the Benks with booty covers is really a game changer. I am more confident of rocking it on daily than the Pitaka.
Yeah that little difference between the two makes the confidence level go up for sure.
@@TechnicallyTee yes and the magnet strength.
They have the new MagEZ Case Pro 3 that is military drop grade and full body
Thanks for this. Do you have a screen protector as well on yours or are you going with the case only?
Took a while to arrive from China. The case is fine if you plan on using it during a dinner night here and there but as a daily it doesn’t hold up. The coating on the back is peeling off pretty bad after 2 weeks. For what it is i think 20 would’ve been a better price.
Benks or Pitaka?
@@JohnMSawyer It was the Benks.
@@hyperspaghetti1855 Thanks!
2 of my absolute favorite thin cases! Both are so good, but that Benks takes it for me because of those closed bottoms. Great video bro!
Also, tightness 👀
The closed top too!
Salute to you brotha for your platform. Outstanding Performance. Love the shenanigans episodes as well as the edc episodes. Keep up what you do.
Thanks man much appreciated! 💪🏽💪🏽
I got my Benks and it didn’t fit well at all. Phone moving all around inside of the case. Had to add thick stickers on the inside. Also it fell back from being propped up against my brick wall outside and created all of these bubbles almost like the phone is covered in a layer of plastic. Other than that it was a good looking case. I have the Pitaka now and it fits perfectly and feels like much higher quality Aramid. Enough coverage on the top and bottom too to avoid scratches.
Ahh that’s unfortunate. I have two Benks Airs and they fit amazing and I can understand about the aramid quality. Pitaka does seem to edge Benks with the quality.
I got the Armor Air and have the same issue with a loose fit. They're sending me a new one, so hopefully it fits better.
I also faced this issue on one of my 13Pro, then I tried on another 13Pro and it just fits well. No loose issue like my 13Pro.
My Opinion on the 15 pro max, best combo is the Benks armor air plus the flolab screen protect with the 3D edge so the screen melts into the edges of the case. It’s the ultimate. Plus I added red spigen camera lenses covers and it looks 👌🏼
I bought the benks and the bottom part started folding out within 2 days of usage, I have been trying to contact them to see if they have any warranty and haven’t get any answer back, honestly I’ll not recommend it
Did you ever hear back from Benks?
I have the armor air case on the way to try. I had the magez case a few months ago, but returned it. Just a little to minimal in the protection department.
Just got my Benks today. It was not as a tight fit on the top half. Bottom half is good snug fit. And the metal rind around the camera rattles. You think my case is a lemon.
I got amor air and has same issue on the top half on my 14 pro max, unlucky
I have the Pitaka but love everything about the Benks except the smooth sides. I really wish Benks would put the weave all around like the Pitaka and get rid of the smooth sides.
Hey, which product is higher quality in terms of texture?
I have the Benks Armor Air and it is the perfect case for me!
I have Benks armor air, the apple leather case have less weight and screen protection and buttons metal.
It’s the case with the best protection under 30gr.
Nice! Do you have a screen protector on it as well or just the case?
I order the magclap air on the website and man it take so long for delivery or maybe I’m just impatient idk hope delivery will be a little more quick to the USA
Love these Battle videos.
A good Battle would be between Andar Aspen & the Nomad Horween.
I’m on the fence about which one to get later this year when I upgrade to the 15 PM 🤷🏻♂️⚖️
I was gonna get the pitaka one but after your video I’ll go for amorAir thanks
Hey Tee, could you check the thickness on both 600D Pitaka and Benks cases with a caliper, or maybe putting them in landscape on a table and check their height. I’m going for the narrowest.
Thanks a lot
I ended up returning the armor pro was to smooth for me
What band is on your watch? Thank you!
Is there any s23u case with flat sides other than ringke onyx?
Do the MagClap ArmorPro Case Kevlar 600D VS Pitaka MagEZ Case Pro 3
I have both these cases but there horrible for me cause my skin too oily so the case feels disgusting after a few hours
Yeah they will get dirty quickly if your hands get oily easily.
Can you rate The RD carbon fiber v3 case
Thanks for sharing. I enjoyed your video. Blessings on your day!
Damn I love these video!
I m subscribing Tee!
You Forgot to mention that Benks Armor Air is a company directly from China And this shipments takes some time or never get your package. Just a warning to all who see this video. As a blogger you should mention this to your subscribers....... I placed an order and with any luck hope this package arrives from China.........
I work at a auto body shop as a painter. I have a bulky otter box case. And i trust that case because I can drop it and won’t do any damage. But I wanted to change the case to a case that has PROTECTION. I don’t how I feel about the thin cases because of how expensive the phone is. Also wanna case that’s comfortable on your fingers or hands. What case do you y’all recommend?
i will just go with a thin case and apple care
AppleCare is $200 per 2 years on the pro max and limited 2 incident per year.
Not the wrong case 😂
Also… #bars
You’re hilarious 😆
🤣🤣🤣
Here you go again making spend money for another case for my 14 pro! I’m at 7 right now cuz of you!
No more video Sir!
Love my benks case
Drop test all of them. Please !
Liked the part when you admited you made a mistake ❤️
Love the battle videos 😊
The comparison it’s not even close these are 2 totally different cases benks have also same style case that it’s a better comparison.
The tightness is there.
You put to the weight test wrong Pitaka Case. Fusion Weaving weight only 21 grams!
Benks for the win on this one
Very nice video
💪🏽💪🏽💪🏽
Normally I'm about #ExposedButts but not for my phone so Binks got that W for me. Even though I don't rock the fruit phones lol
Hahaha I already know! 💪🏽💪🏽
First: 💪🏿💪🏿💪🏿
As the super mega Pitaka fan on the channel (yes, I am claiming that title), I LOVED this review. I know the Benks is heavier, but I swear you can't feel the difference. For me, the Pitaka case has taken a huge step back from the 13 series. What won me over with the Benks is that the aramid fiber doesn't seem to show the finger grease as easily as the Pitaka cases have, the price of benks being cheaper, and the fact that THE BALD HEAD AND THE BOOTY IS COVERED!
Great video as always!
LETS GOOOOOO!!!!