Thanks! The third method is really interesting. Quite usual that I need to perform reverse engineering of routing. So, I have a 2D drawing of a cable and need to issue assembly documentation with visualisation how the cable is placed. I can make a 3D model of cable. Place it later on the assembly with fixed length. And finally make routing that it will look good.
really helpful, how would I create a wire or flexible hose between two parts I created, let's say custom fittings...or maybe between fittings I've downloaded. I usually just model the wires in manually but this seems like it could save alot of time..
![An Introduction to Electrical Routing in SolidWorks [Webcast]](http://i.ytimg.com/vi/jBG8YI1C8G4/mqdefault.jpg)
hi can you please show how to create the maintainance loop in the solidworks
Thanks!
The third method is really interesting. Quite usual that I need to perform reverse engineering of routing. So, I have a 2D drawing of a cable and need to issue assembly documentation with visualisation how the cable is placed.
I can make a 3D model of cable. Place it later on the assembly with fixed length. And finally make routing that it will look good.
really helpful, how would I create a wire or flexible hose between two parts I created, let's say custom fittings...or maybe between fittings I've downloaded. I usually just model the wires in manually but this seems like it could save alot of time..
How to make Bundle for the routed 3 cables?