How to adjust the Transient Delay of your Affordable Diesel Generator
Вставка
- Опубліковано 22 сер 2024
- This video instructs you how to adjust the Transient Delay of your Affordable Diesel Generator. This may be necessary in the event that your generator is shutting down due to over/under frequency or over/under voltage alarm because of the startup of a large load such as air conditioning units, compressors, or large refrigeration units.
For more information visit www.AffordableGenerator.com
This video very useful for me, I used this function with heavy staring current load, thanks alot Engineer
Hi Mark just wanna find out how to set fuel priming and engine cool down time on the controller
Already did but why the setting keeps coming back to its original after switching off the key switch. Thanks for your reply
hello hello my dear i have 100kva perkiness generator
when i tray to start after starting
the generator stops
and
on the display
over frequency
how can i adjest it
I have a case where there is a chiller connected using star-delta and the GenSet trips, do you think it will help ?
What is couse of generator under frequency?
Hi sir.. please give me some advice about my generator. It always automatically shut down and it says "generator locked out".
Why do you suggest max of 0.7 ,what if it is set at 2.2, what would happen to the generators?
Thanks for this man give me more knowledge about dse panel..affordable diesel thanks a lot
The video helps me to find a solution of over voltage... Thank you !
You all prolly dont give a shit but does someone know of a tool to get back into an Instagram account?
I was stupid lost my password. I appreciate any help you can give me.
@Damari Henrik instablaster :)
@Theodore Darian i really appreciate your reply. I found the site thru google and Im in the hacking process now.
Looks like it's gonna take a while so I will get back to you later when my account password hopefully is recovered.
@Theodore Darian it worked and I actually got access to my account again. I'm so happy:D
Thank you so much you saved my ass !
@Damari Henrik happy to help :D
How to reduce or increase the running meter of the generator
Hi, if my generator does not have ignition key to switch on before I proceed to transit delay, is it possible for me to still carry out the transit delay?
My generator is over frequency what should I do
Dg generator shutdown when I put new AVR on it what causes that
Hello. how to turn on the ignition without starting the engine ? DSE 7320
How to resolve negative phase sequence problem and dg not stop during on this condition.
how to fix under and over voltages in cumins control DSE 8610 KII
How do one trace earth fault on a generator set
Sir!
How to update generator controller
Please answer to me
Dear sir
how to reset under frequency shutdown power please explane me because my power generator auto shoutdown and in desplay soing under frequency shoutdowna
I have this problem under frequency so why did you solve it
Trying to find out how to remove the low water level alarm but im failing. Any help? The water level is okay and everything runs as it should but the alarm wont go away
Hello, i have a problem with my kubota generator, when the generator shuts down ,it will not cut the power, it makes the electricity feather or turns on and off while shutting down, i need help on how to fix that
Nice
I connect 30kw 3 phase motor to 100kw generator but when it ON getting under voltage alarm let me know y
Hi sir my deepsea controller is DSE7310 volvo penta engine 500kva if I start up my generator 10 to 20 second monitor showing ecu amber .and generator under voltage.please give me advise
I have probelm my generator started and few second off massage ECM and picture engine
Can anyone tell me genrator is stoped after 9 secs saying generater at rest how to fix it it says saftey on delay
Sir what is problem my genset cummins 4bt3.9-g2 the engine high running acceleration is rough and shaking after 1 minute ,and don't start in automatic but he start in manual starting
Please what can cause crank down on deep sea 4510 version
What reason appear code (stoping) on screen generating 7320
Thanks #powerlearningchannel
So what's the ECU warning ⚠️? please
Instruction to install smartgen screens?
Hi, bro, I have two generators with using ATI automatic transfer switch system my DG,s are running will but when 12 hours of one DG is completed it gives the signal the other DG set get a start but the previous one does not get stops what is the reason when I bring down the main circuit breaker of DG after some time The DG which will be turned off will get off
Thanks
Hello because it throws me a memory corruption message after resetting the module when doing the service and it does not turn on
Sir here one problem generator
Alarm
Gun Under frequency
Shutdown
If you set up this genset,no more password?
Sir I have problem with my generator 750kva it start but after a seconds it will off and and the monitor displayed voltage cannot be reached,sir what is the main reason in that problem.
the main reason is that the generator is overly complicated.
Perkines generator code spn 110
Please tell me problem how to sustion
I have one dout genratater running but stopped when coming alarm low coolent oil level oil is full on the tank i given flot switch short is ganerater runing
The sender plugs are not working
At my DSE 6110 running time always 0 h 0 m please help
When i start diesel engin generator after 3 to 4 days it becomea air lock. Whats problem
How increase display light
Is there anything else I can do to to get this generator yo start. We did this already and didn't work. The generator doesn't have anything hooked up to it and it says under voltage
Saul sanchez check your voltage regulator
If t's a large load motor, use a VFD on the motor so initial load is much lower
Hi sir how to fix deep sea electronics 710 the alarm indacte the picture of turtle what is the meaning of these thankyou
I have problem my generator shut down and message gen under frequency shud down our generator iveco generator 400 kva
Mostly because of overload.
Sir Gen over votag gen shtdown
Can anyone say how can we adjust voltage or rpm in this device through setting
Voltage, RPM & Frequency are proportional they can be adjusted through the AVR and the engine speed governor
Apa penyakit mensi controller tidak bisa hidup bisa di sentarte Tdk hidup tolong di jelaskan bahasa indonensia
People I wanted to ask if your generator starts alright,but the power did not shoot to where you need to used it,what might be the course?
Check d Avr
Hi . I have a generator rated at 110 kva. When I connect it to a 30kw compressor the generator stops running and register under frequency error. What could be the problem?
when i made load testing 110% for my generator 750kVA (pri), it was stop and appear under frequency, cooling water was too hot and blow out at that time,
It's possible because of the huge added load, which cause the voltage to Dip and in turn causing the Genset to register a lower frequency check and re-adjust your transient delay.
Or it might be your governor which can't keep up with the load demand
I need pin edit DSE 6120
Need bangla tutorial
CovidImages need to be invested more than half19
so there are unlabeled symbols for electric transmision pylon, a factory and a sinewave. Which of those means the power grid, the generator and the load? I think the person designing the panel was incompetent and should be fired.
i need key edit des7310
Nice