Even with the imperfections, these two mounds did not disappoint. The moulds are strikingly beautiful & they really look like true crystals, reminds me of the Cinderella slippers. Absolutely Gorgeous!!! 💎💎💎
Sorry I just missed the premiere. I spray alcohol on the surface of mine too, must have used the round flower one 20 times or more by now, no ill effects on the mould as far as I can tell so I think you're ok :
Beautiful molds! Great effort & colors Wendy ❤ These are going to require the lowest/thinnest viscosity resin, to get into all the crevices. Takes a 2 day wait but it’s worth it. Thank you for sharing🌹🌹🌹.. I’m headed to have a look at what’s available 👌💯💯
So delicately beautiful. I can't find the words either. Before you took that metal tipped bottle out I was talking to the screen saying use one of those!!! 😂 And you did. Maybe putting the more undercut one in one hand and try to open it as if taking it out while using a very thin viscus resin . But how would I know unless I were in your gloves, so to speak. A fantastic job and they are lovely 🌺🎆
These are pretty. If you put a bit of resin in the lotus mold and then pull it apart from all directions (like you did when looking for where the cavities were) it'll help a ton. I have some intricate molds I have to manipulate like that.
Yet another marvelous creation video,Ms Wendy 💜💜,your imagination is amazing and you make them reality 💕 Loved both the set of crystal flowers😍💜,each one is unique and beautiful 😍. Hope you are fine and wishing you Happy Valentines Day,Ms Wendy 💜💜🌹
Beautiful ❤❤❤❤ how are you to know if the lotus leaves have formed right without taking it out? You can’t see them through the cured resin So confused on that one
Beautiful pieces and beautiful molds! I actually really dislike working with pipettes but, maybe they could be slid into the crevices without damaging the mold. A pearlescent black or a little interference blue mixed in black would be a pretty pearl in the center of the lotus, along with the gorgeous color you used for the first round of petals again. Somehow suspending floral wire into the pearl would make an amazing bouquet. Lotsa fun possibilities.😊❤
Gorgeous resin crystal flowers,Ms Wendy 😍😍💜💜 .Those molds are gorgeous and the first set came out stunning beautiful with those crystal effects peeking through 😍😍💜.And the second set with amazing colors gave it another level of beauty 😍😍💜.Thank you so much for sharing this wonderful video, keep inspiring 😍😍🙏💕💜
I just bought their small crystal mold and received it in Thursday's post. I poured it on Friday and decided not to use a heating mat to cure it faster. Just to see if the resin has fewer bubbles trapped in it. Fingers crossed for when I demold it in a few more hours. I never thought to use the needle nosed bottle to get the resin completely into each nook and cranny. Thanks for the backup plan. ❤❤❤
Hi Wendy very cute moulds and the pieces are beautiful 😍 hope that one works for you next time you try it, loving the little piggy pigments 😍 thanks for sharing ❤❤❤ xxx
The flower looked nice in one colour and amazing in multiple ones. Even if some petals were incomplete the flower still looked interesting and that's a bonus when it comes to jewellery, right?
The first mold is gorgeous and I would order one. The second one, whilst a good idea, is not worth the effort. I will pass on something that complicated. Thank you for the video.
Nice work. Maybe if you try using a pipette. They're soft and bendy, so maybe it would work out best.. try making the flower using the colors of a sunflower...I know purple is your favorite color...try using different colors of purples
Hi Wendy, I "love" your channel, and just subscribed. I am elderly and have never tried this artform before, but you have inspired me enough to give it a go. I have purchased some resin from intoresin (2 part 1;1) and bought two moulds to start with. Could you please tell me how much resin should I pore in one go, it's not deep cast and one of the moulds is the large skull? Also can you see a division line with multiple pores? Thanks, and keep up the great tutorials.
Hi Rob and welcome to my little channel 😀😀👍 If you use the average pour resin really each pour shouldn’t be more than 1.5 cm or so. You will see lines but to minimise this you could pour each layer before the previous one is cured. Say 3-4 hours after pouring. Or 2 hours on a heat mat or on a summer day when resin cures quicker. If you want to find out how much resin to pour, fill your mould with rice and measure the amount in the same cup you are using to mix. The volume will be the same. Make sure to clean your mould afterwards as rice can cause dust. I hope that helps 🥰
Hi Wendy!! Beautiful moulds 😍 I think the problem is that they’re too small and is very difficult for the resin to get to all those nooks and crannies 🤔 Maybe bigger moulds should solve the problem, what do you think? Have a great day!! 🙋🏻♂️
Beautiful I have that mold may I suggest try not using the heat mat I feel it cures the resin to fast n not giving enough time for the bubbles to pop on its own
Beautiful flowers, shame the lotus didn't work better - like you say, not all of us have a pressure pot to get rid of those bubbles. Perhaps a really low viscosity resin would work a little bit better.
I would try using the lowest viscosity resin I could find. Perhaps one of the 2:1 pourable resins. I wouldn't use alcohol on the mold, but could a drop or two of alcohol in the resin or use alcohol ink to color the resin? I don't know if this would help, but at least it shouldn't damage the molds.
Personally I don’t like Alcohol inks much at all. I’ve had things change colour considerably. Yes a super low viscosity resin would work better if you have one 😀💜👍
Would using one of those syringes with the really long tapering tiny tips allow for direct placement of resin in the mold? Also, can you not pop the bubble with the resin still in the cup? Then slowly and carefully fill the mold? I could see it being an issue with resin that is deeper than half an inch but I think I could come up with a solution, but I don’t know if it would work in real life. Could I not mix the resin in the cup, pour the resin into a shallow dish and then torch it? Knowing how I me 😊 I would probably cut a corner out of the shallow dish and I would fit a small funnel there with silicone…. 🧐 this way I could tilt the dish to keep the resin in place while I get rid of the bubbles and then carefully pour it through the funnel into wherever I want, I see no fault with my hypothetical technique 🤓
it sounds like it could work. But the issue here was the mould not taking the resin into it . Not the resin having air in it. So I understand what you mean ... but it isn't necessarily the way to go with this one.💜👍
Someone needs to invent a flat vibrating mat for shaking air bubbles from molds. So you could just pour the resin in and turn the mat on and release those nasty bubbles. Concrete workers have a long vibrating tool they put in walls as they pour them.😊
I tried using alcohol inc, not muchvbut every time i do, the resin won't cure or takes like a week or longer, can you help, explain? What am i doing wrong?
I saw that the dictionary in my mobile wrote something completely different from what I actually did. I now corrected it to Bottle and not the bottom.🎉😊
So happy you did this video as I was having the same problem with the lotus mould… p.s I didn’t mean to say “I fell asleep” it typed in without my consent 🫣… I fell out off the internet… your videos never bore me ❤❤❤❤
😂😂😂😂 no problem honey 🤗🤗 I thought it was funny at the time. Then thought maybe you had a sleeping disorder and I felt bad for laughing 😂😂😂 it’s all good fun to me 😘
Yes please come back and do some more of these....they are beautiful and very tempting ❤
Thank you so much 💜😀
Hi Wendy 💜 I love the mica you chose,beautiful!!💜
It is stunning mica , Thanks so much 💜
OHHHH, these molds by Into Resin are amazing, Wendy! SOOO jelly! 😍😊💕. My fave is the lotus flower- yummy!
They are stunning 😀😀👍😂 thank you 🥰
Even with the imperfections, these two mounds did not disappoint. The moulds are strikingly beautiful & they really look like true crystals, reminds me of the Cinderella slippers. Absolutely Gorgeous!!! 💎💎💎
Yes I know what you mean ... I just couldn't get the words out to describe them well enough 😂😂😂😂 thank you Jackie
@@Toonpish It happens sometimes.. lol. 🤣🤣🤣
These are stunningly beautiful. And you, are a star. ⭐
Thank you so much Lisa 😀😀😀💜👍😘
What stunning molds... they make beautiful crystals flowers
You are so right Juls 😀💜👍
Even with the imperfect ones all of them really showed how beautiful they are! You did a great job demonstrating how to fill these moulds!
Thank you so much Michelle 😀😀👍🤗
Wow! Gorgeous moulds.
they are stunning👍❤
Wonderful molds, only you can find them. ☺️ Great work. 😘💜☺️
Thank you 🤗 😀😀👍🥰
These are stunning, even with the flaws!!! That blue!!!
It’s gorgeous for sure 😀😀👍❤️
ooh you got those moulds! Fabulous! I can't wait to see what you do with them
Thanks Tracey 😀😀👍🥰
Sorry I just missed the premiere. I spray alcohol on the surface of mine too, must have used the round flower one 20 times or more by now, no ill effects on the mould as far as I can tell so I think you're ok :
@@miniscenesgb fantastic to know 😀😀👍❤️
❤ love all your crafts Wendy
Thank you so much Ramona 🤗🤗👍❤️
Those are so amazing! I love that pearl in the center and how sparkly they are!
They are gorgeous 😀💜🌺🌸
the facets on the finished piece are amazing! such beautiful detail.
Thank you so much!😀😀👍❤️
Oh my, I'm intrigued! I definitely would love to see another video of you working with these.
John I will see what I can do 😀😀😀👍💜
Love the new graphics
Thank you so much Jean 😀😀👍💜
Those moulds are gorgeous! ❤😊
That they are 😀😀👍🥰
Great little video Wendy, so many projects can be done with those pieces not just broaches.
I totally agree Wayne 😀😀👍❤️
Nevermind. I found it and placed my order. Thank you!
thank you ❤️❤️❤️
The molds are gorgeous ❤❤❤
They are really 😀😀👍
I need these! I'm gluing a real brooch on the top of my screw on lid to my jar I just made. 😆 what timing Wendy!❤
Ali 😂😂😂 you do need this 😀😀👍🥰
Loving these molds. I do hope you make more of these, they are so pretty. Shared 🌺
Thank you Georgia ... they are stunning moulds😀💜
I have that mold!! First pour has a few bubbles. Looking forward to seeing how you do 😊
Thanks Tammy 😀😀🥰👍
These are beautiful, amazing work 😊
Thank you so much 😀👍❤️
Wow stunning flowers! ❤
They are! 😀😀😀 gorgeous moulds 😘😀
beautiful glass like effect, love it
it is gorgeous 😀💜👍
Beautiful molds! Great effort & colors Wendy ❤
These are going to require the lowest/thinnest viscosity resin, to get into all the crevices. Takes a 2 day wait but it’s worth it.
Thank you for sharing🌹🌹🌹.. I’m headed to have a look at what’s available 👌💯💯
Thanks for the tips! 😀😀 great tip indeed 😀😀👍🥰
Those molds are so pretty ❤
Thank you so much 😀💜👍
So delicately beautiful. I can't find the words either. Before you took that metal tipped bottle out I was talking to the screen saying use one of those!!! 😂 And you did. Maybe putting the more undercut one in one hand and try to open it as if taking it out while using a very thin viscus resin . But how would I know unless I were in your gloves, so to speak. A fantastic job and they are lovely 🌺🎆
Thank you so much 😊 😀😀👍💜
They are GORGEOUS and i hope the next ones work for you.😊
I hope so too ... time was against me this time 😏😀👍💜💜
Wow they are really shiny!😮
They are stunning😀💜
O my goodness
They are soooo beautiful ! Wow I love them!❤️🧡💛💚💙💜
Thank you so much 😀😀👍🥰
Love the effects of these ...So sparkley😍
They are Lisa ... thank you 😀😀😀💜
These are pretty. If you put a bit of resin in the lotus mold and then pull it apart from all directions (like you did when looking for where the cavities were) it'll help a ton. I have some intricate molds I have to manipulate like that.
Thank you 😀😀👍💜
Wow, Rogers molds are absolutely stunning!!! Loved this one Wendy ❤
They are stunning for sure 😀😀😀 Thank you so much Rechelle
Yet another marvelous creation video,Ms Wendy 💜💜,your imagination is amazing and you make them reality 💕 Loved both the set of crystal flowers😍💜,each one is unique and beautiful 😍.
Hope you are fine and wishing you Happy Valentines Day,Ms Wendy 💜💜🌹
Thanks so much 😊Sudha 😀😀🥰 have a wonderful valentines 🥰🥰
Those are gorgeous molds and you did a great job even with the difficulties.
Thank you so much! 😀😀👍❤️😘
I love their molds!❤❤❤ I have their crystal snowflake ornaments. They are stunning!
Oh that’s a stunning one for sure 😀😀👍🥰
It's gorgeous
Thank you 😀👍💜
They are really pretty!
Thank you Gail ❤️
Awww love these
Thank you Tammy 💜
Beautiful moulds, and beautiful makes. Thank you Wendy x❤
You are so welcome Lesley 😀🥰👍
Beautiful ❤❤❤❤ how are you to know if the lotus leaves have formed right without taking it out? You can’t see them through the cured resin
So confused on that one
if you poured in layers you could see it for sure 😀💜👍
Beautiful pieces and beautiful molds! I actually really dislike working with pipettes but, maybe they could be slid into the crevices without damaging the mold. A pearlescent black or a little interference blue mixed in black would be a pretty pearl in the center of the lotus, along with the gorgeous color you used for the first round of petals again. Somehow suspending floral wire into the pearl would make an amazing bouquet. Lotsa fun possibilities.😊❤
Funo you have such imagination for sure . I love reading your comments ... Thank you so much 😀👍💜😘
Gorgeous resin crystal flowers,Ms Wendy 😍😍💜💜 .Those molds are gorgeous and the first set came out stunning beautiful with those crystal effects peeking through 😍😍💜.And the second set with amazing colors gave it another level of beauty 😍😍💜.Thank you so much for sharing this wonderful video, keep inspiring 😍😍🙏💕💜
Thank you so much Sudha 😀😀😀 I will try really hard to carry on 😂😂😂 I enjoy it so much though 😂😂😂👍🥰
I just bought their small crystal mold and received it in Thursday's post. I poured it on Friday and decided not to use a heating mat to cure it faster. Just to see if the resin has fewer bubbles trapped in it. Fingers crossed for when I demold it in a few more hours. I never thought to use the needle nosed bottle to get the resin completely into each nook and cranny. Thanks for the backup plan. ❤❤❤
Good luck with your creation 😀😀😀 sounds like you have it sorted though 👍❤️
@Toonpish I actually got the same mold you did. Not the lotus but the other one. I missed a couple of bubbles. It does have a ton of mini bubbles.
@@SkitchBean_aka_Christine_E well I bet it looks great though 😀👍
they are beautiful
Thanks Nini😘👍
I love the molds
They are gorgeous 😀👍❤️
Hi Wendy very cute moulds and the pieces are beautiful 😍 hope that one works for you next time you try it, loving the little piggy pigments 😍 thanks for sharing ❤❤❤ xxx
Michelle They are stunning pigments and I. am not affiliated with them lol 😀💜👍
These are very pretty
thanks Kim😀😀💜👍
Fantastic 🎉
Thanks 🤗 😀😀👍
Wow they are beautiful- the first one - they also are beautiful- I think a bug was eating the leaf - that does happen you know😂
you could have a point there 😂😂😂😂💜
Wow gorgeous ❤❤❤
Thanks 🤗😀😀👍🥰
Sorry I had to miss the live. For once I was out of my house and having lunch with the ladies!!
Oh that sounds a great way to have fun though ... hope you had a great time 👍💜
The flower looked nice in one colour and amazing in multiple ones. Even if some petals were incomplete the flower still looked interesting and that's a bonus when it comes to jewellery, right?
Oh yes that’s definitely a bonus 😀😀😀 I think anyone would ask about it and it would be a really conversation point 😀😀👍🥰❤️
The first mold is gorgeous and I would order one. The second one, whilst a good idea, is not worth the effort. I will pass on something that complicated. Thank you for the video.
I do see your point ... but some people like the challenge 😂😂 thank you
I put alcohol in my molds with extra details. It helps make sure resin gets in and with little bubbles as possible.
Yes but did you see the rules 😂😂😂😂💜
Nice work. Maybe if you try using a pipette. They're soft and bendy, so maybe it would work out best.. try making the flower using the colors of a sunflower...I know purple is your favorite color...try using different colors of purples
Thanks for the idea! 😀😀💜
Hi Wendy,
I "love" your channel, and just subscribed. I am elderly and have never tried this artform before, but you have inspired me enough to give it a go.
I have purchased some resin from intoresin (2 part 1;1) and bought two moulds to start with. Could you please tell me how much resin should I pore in one go, it's not deep cast and one of the moulds is the large skull? Also can you see a division line with multiple pores?
Thanks, and keep up the great tutorials.
Hi Rob and welcome to my little channel 😀😀👍
If you use the average pour resin really each pour shouldn’t be more than 1.5 cm or so.
You will see lines but to minimise this you could pour each layer before the previous one is cured. Say 3-4 hours after pouring. Or 2 hours on a heat mat or on a summer day when resin cures quicker.
If you want to find out how much resin to pour, fill your mould with rice and measure the amount in the same cup you are using to mix. The volume will be the same.
Make sure to clean your mould afterwards as rice can cause dust.
I hope that helps 🥰
Thank you Wendy, I will probably learn more once I've managed to watchall the uploads you have made. Will take a while though?@@Toonpish
I have the broach mould but I’ve only made it clear as I’m afraid I won’t be able to get the colour out if they stain
I love the red in yours x
It’s a stunning red mica and that’s a rare thing 😂😂
I know what you mean about being afraid of colour 😂😂😀🥰👍
Hi Wendy!! Beautiful moulds 😍 I think the problem is that they’re too small and is very difficult for the resin to get to all those nooks and crannies 🤔 Maybe bigger moulds should solve the problem, what do you think? Have a great day!! 🙋🏻♂️
Maybe thinner resin would work a lot better 😂😂 and bigger would work too 😀😀👍
@@Toonpish 😉👍 🥰
Beautiful I have that mold may I suggest try not using the heat mat I feel it cures the resin to fast n not giving enough time for the bubbles to pop on its own
Good point indeed 😀😀👍🥰
I hope you come back to this one soon!!
If I have time I will ❤️❤️💜😀
Beautiful flowers, shame the lotus didn't work better - like you say, not all of us have a pressure pot to get rid of those bubbles. Perhaps a really low viscosity resin would work a little bit better.
Absolutely 👍 worth a try indeed 😀😀👍🥰
I would try using the lowest viscosity resin I could find. Perhaps one of the 2:1 pourable resins. I wouldn't use alcohol on the mold, but could a drop or two of alcohol in the resin or use alcohol ink to color the resin? I don't know if this would help, but at least it shouldn't damage the molds.
Personally I don’t like Alcohol inks much at all. I’ve had things change colour considerably.
Yes a super low viscosity resin would work better if you have one 😀💜👍
Would using one of those syringes with the really long tapering tiny tips allow for direct placement of resin in the mold? Also, can you not pop the bubble with the resin still in the cup? Then slowly and carefully fill the mold? I could see it being an issue with resin that is deeper than half an inch but I think I could come up with a solution, but I don’t know if it would work in real life.
Could I not mix the resin in the cup, pour the resin into a shallow dish and then torch it? Knowing how I me 😊 I would probably cut a corner out of the shallow dish and I would fit a small funnel there with silicone…. 🧐 this way I could tilt the dish to keep the resin in place while I get rid of the bubbles and then carefully pour it through the funnel into wherever I want, I see no fault with my hypothetical technique 🤓
it sounds like it could work. But the issue here was the mould not taking the resin into it . Not the resin having air in it. So I understand what you mean ... but it isn't necessarily the way to go with this one.💜👍
Where can we get the molds? I didn't see it in your description love. Did I miss it?
Int@resin link in the description box 😀😀💜👍
Hi Wendy, you were very kind about the moulds but the lotus flower needs to be thought out better 🦆💕
perhaps a much thinner resin would be best suited to it as a couple of people have said . But the design is stunning 😀💜
Someone needs to invent a flat vibrating mat for shaking air bubbles from molds. So you could just pour the resin in and turn the mat on and release those nasty bubbles. Concrete workers have a long vibrating tool they put in walls as they pour them.😊
Well that’s a great idea 😀😀 maybe someone will read this and come up with something 😀😀👍🥰
😊
💜
😊❤
👍❤❤😀
I tried using alcohol inc, not muchvbut every time i do, the resin won't cure or takes like a week or longer, can you help, explain? What am i doing wrong?
It sounds like you are using too much for the amount of resin.
Use just a little 😀😀💜👍
What happens If you make a rubber needle to your bottle? It should not harm your mold ?
That’s very true 😳😀💜
Sounds like a great idea to me 👍💜
I saw that the dictionary in my mobile wrote something completely different from what I actually did. I now corrected it to Bottle and not the bottom.🎉😊
🥰
💜👍
Is it a lotus flower mold?
One is yes 😀😀🥰👍
They looked like very aggravating molds. 😮
the Lotus is tricky but the other one really is quite easy 😀😀💜👍
Whij not vacum pomp😂😂😮
have you ever cured resin in a vacuum pump?
@@Toonpish no Air out😁
@@bentebrunsvelt319 it doesn’t work sadly. But I could have used the pressure pot but I know many don’t have them 😀😀👍
So happy you did this video as I was having the same problem with the lotus mould… p.s I didn’t mean to say “I fell asleep” it typed in without my consent 🫣… I fell out off the internet… your videos never bore me ❤❤❤❤
😂😂😂😂 no problem honey 🤗🤗 I thought it was funny at the time. Then thought maybe you had a sleeping disorder and I felt bad for laughing 😂😂😂 it’s all good fun to me 😘