Brother DCP-T820DW 設置無線網絡 Wireless WIFI Connection
Вставка
- Опубліковано 19 вер 2024
- 1. 檢視並記錄所連接電腦的目前無線網路設定。
2. 按 WiFi。
3. 按 ▲ 或 ▼ 選擇[Find Network]選項。按 OK。
4. 出現 [WLAN Enable?] 訊息時,請按▲選擇 [On]。
5. 隨即啟動無線安裝精靈。
6. 機器將搜尋您的網路並顯示可用 SSID 的清單。
7. 顯示 SSID 清單時,按 ▲ 或 ▼選擇所需 SSID。按 OK。
8. 輸入密碼,再按OK以套用您的設定。
9. 若要套用設定,按 ▲ 選擇[On]。
10. 機器將嘗試連接到您選擇的無線裝置。
11. 如果成功連接無線裝置,機器液晶螢幕上會顯示[Connected]。
12. 您已完成無線網路安裝。若要安裝使用本機器所需的驅動程式和軟體,請轉到 support.brother.com 網站上您的機器型號的下載頁面。
1. Check and record the current wireless network settings of the computer to which you are connecting.
2. Press WiFi.
3. Press ▲ or ▼ to select the [Find Network] option. Press OK.
4. When the [WLAN Enable?] message appears, press ▲ to select [On].
5. This starts the wireless setup wizard.
6. The machine searches for your network and display a list of available SSIDs.
7. When a list of SSIDs appears, press ▲ or ▼ to select the SSID you want. Press OK.
8. Enter the key, and then press OK to apply your settings.
9. To apply the settings, press ▲ to select [Yes].
10. The machine attempts to connect to the wireless device you have selected.
11. If your wireless device is connected successfully, the machine's LCD displays [Connected].
12. You have completed the wireless network setup. To install the drivers and software necessary to use your machine, go to your model's Downloads page at support.brother.com.