Це відео не доступне.
Перепрошуємо.
How To Make Arduino Based 4 In 1 Meter | Volt Ampere Watt and Ampere Hour
Вставка
- Опубліковано 14 сер 2024
- Sponsored by PCBGOGO: Electronic Project Engineer's Best Partner! www.pcbgogo.com
Offer low cost with high-quality PCB prototype and PCB assembly service.
$5 for 10 PCBs; PCB assembly from $30
-----------------------------------------------------------------------------------------------------------
Hi friends in this video i have made Arduino based ampere watt and ampere hour I hope you will enjoy this video Gerber files and circuit diagram is given below please like share and subscribe
Components:
1x ARDUINO NANO s.click.aliexp...
1x 16X2 LCD s.click.aliexp...
1x ACS712 (30A) MODULE s.click.aliexp...
1x 10K TRIMPOT s.click.aliexp...
1X 2K 2RESISTOR s.click.aliexp...
1X 47K RESISTOR s.click.aliexp...
2X 2 PIN TERMINAL BLOCKS s.click.aliexp...
1X PERF BOARD s.click.aliexp...
JUMPER WIRES s.click.aliexp...
Circuit Diagram:
drive.google.c...
drive.google.c...
Gerber Files:
drive.google.c...
code:
Arduino file drive.google.c...
zip file drive.google.c...
text file drive.google.c...
Useful Tools
electronic tool kit s.click.aliexp...
Hardware tool kit s.click.aliexp...
Desktop oscilloscope s.click.aliexp...
hand held oscilloscope s.click.aliexp...
cordless drill + screw driver s.click.aliexp...
power supply s.click.aliexp...
soldering station s.click.aliexp...
Drill press s.click.aliexp...
3d printer www.aliexpress...
CNC machine s.click.aliexp...
My Channels:
KIYANI' KI LAB / @kiyanikilab
KIYANI TECH / @kiyanitech
Instagram: / kiyani676
fecebook: / kiyanis-lab-1520512291...
Previous videos:
• how to make mini cnc p...
• Let's Answer Your Ques...
• LET'S REPAIR IT | BENQ...
Thank you. You are an ideal person. Thank you very much, because your ideas are useful to all people. Thank you again from Iraq
AHMED RAZA
Electrical 2nd..
Very good video sir ❤
Good job Sir
well done. I see something as you used some other components without showing them in the tutorial. The question i get is that, is this working as showned in the video? as in the schema given??
Nice project, I like the stability of the display for current and voltage, for this reason I looked in your code to see how you implemented the reading of voltage and current.
I'm trying to understand your code but I'm not very good at arduino and C.
In your code, I don't understand in this relation "current=(current/200-514);" what does 514 mean, why -514, the number of readings is 200, shouldn't it be only current/200?
I also don't understand the relation "volt=volt/30;" why is it "volt/30;" and not volt/200 and "current=current*15";?
Thank you and congratulations for the project.
Gracias.
can you substitute the LCD display with 4-digit 7-segment displays to measure voltage and current
Merhabalar bu projeyi esp8266 ile birlikte aynı malzemeleri kullanarak blink uygulamasında nasil takip ederiz.? Bu şekilde bir proje yapabilirmiziniz?
Arduino uno esp8266 lolin acs712 16x2 lcd ile birlikte blink üzerinden nasıl takip edebiliriz.?
Boa tarde passando para deixar meu joinha video top de mas
Que Deus te abençõe.
Very nice project
Do you think is possible to build a watt meter for a DIY spin bike in order to measure the power of the pedal strokes ? Thank you if you reply, awesome video btw
Heyy... really a fantastic project.
This was for DC parameters
Can you demonstrate something for AC parameters. I have an amicisense 6 in 1 energy meter which shows AC parameters. I just want those data to be logged through ardruino whatever possible to mobile or pc through cable or wireless.
Is it possible ?
Can ot act like a battery shunt to measure power flowing in and out of battery?
You are using a 10k potentiometer, what should it be set too? What are you adjusting with the setting? please explain.
That is for voltage reading. ADC can go up to 5V max, so in order to read 12V it needs to be reduced to be within the ADC range. Potentiometer is to quickly calibrate readings without the need to adjust the code
Excellent project
Hi, congratulations on the project! I made the circuit but the Ampere measurement is not exact (the measurement on the display is greater than about 2 Ampere), can it be calibrated and how? Thanks.
yes it can be in the code
How would you make this project wireless? I would like to be able to monitor my solar panel from inside the house. It’s a small 12v solar array that run the lights on my garden railroad.
good idea bro i will work on that
@@KiyanisLab thank you
Good job
Hi. Please add adjustable buttons control of min and max voltage and current, and dependable logic output.
Hi, please can you tell me if I am using WCS sensor in place of ACS what changes should be done in the code
Why are the current indications higher than the real ones in my device? However, the voltmeter readings are correct
Can we measure current injected into earth through electrodes n voltage from other electrodes?
Thank you working well.......
Are the 6 resistors of 5W / 220R for a test or are they necessary to have the right measurement of the values? How should they be connected? Thanks.
no you can use any load
Excuse me, I also wanted to know up to what voltage and current can be applied to the input? Thanks.
30v and for amp it depends on acs712 sensor 5
Both resistors should be 0.25w ?
How make two ohm meter using one aurdino using lcd display
Can it be used to check the capacity of salvaged lithium ion cells from an old laptop battery?
02:26 Can anybody tell what's +VE? Please urgently.
thanks brother
Hello sir!
Please add to this temperature monitoring
Please reply 🙏
Should we adjust the potentiometer?
How many volts i can measure with this Maximum?
Hope you make more projects. Good luck...👍👍👍
nice one. what are the highest volts and amps this can measure. Did not understand the Amp H relation here, is it to display the remaining battery capacity?
30v and 30A max and AH is the Current consumption according to time
@@KiyanisLabthanks for your reply. Would it be possible to modify increase the measurements capacity to 60v and 60A? If yes can you please advise. I would like to use it for my DIY power supply for power electronics. what happens if the inpit increases measurements capacity, does it display the Max or burnsout. Thanks
How make rpm tester by sensor voltage and amper?
please guide me if i use current meter (20Amp) module what changes i need to do in the code and which amp module you used in the project and in the code
Did you find answer? Please let me know i want to use 5amp
No I didn't find the answer
Can I use 12V automobile bulb as load? Any body please reply..
yes
Could you please make video for measure AC current, voltage, power factor also power consumption display with a data logger. If possible add remote view via internet. I have no idea, is it possible or not. Hope you could make it.
yes bro soon
@@KiyanisLab Sir, Thank you so much for response me. Actually I want measure AC (200V - 250V) result instate of DC electricity
Nice
How to add temperature and temperature cooling fan auto on off.
Please tel me
ok soon bro
Please share Arduino code and thanks for sharing
How this ckt measures voltage?
Nice Nice
Why u connect 4resiStance in parallel
i am using them as load
sir why u choose arduino nano & not other arduino?
What sets the 10K potentiometer?
can we use arduino uno and a wifi module
Can I use it to measure ac current directed to home?
Which supply you used
AC or DC ?
Good work,. Can I use it 35A current .
Yes you can but you need to use different current sensor this one can go for 30A max you can use ACS724 40A
@@KiyanisLab thanks ,need edit code?
Brooooo what voltage can be measured?
60v max
Merhabalar 100v solar panel den gelen bilgileri okuyabilirmiyim bu sistem ile ? Şimdiden çok teşekkür ederim...🙏
Merhaba devreyi oluşturdunuzmu oluşturduysanız nasıl oluşturdunuz?
@@nurettinkaraca8641 evet olusturdum
@@Ataxsan lisans bitirme tezim bu yönde de sizden yardım alabilirmiyim devreyi oluşturamıyorum
mail yazarmısın
Please do it with pic microcontroller
ok bro
How to set this 10k pot
Can I measure AC voltage??
no
You're pcb gerber file to shere ?
Up30v dc power salega
At 0:46 the advertisement for PCBGOGO has supposedly 4 different customers writing exactly the same review text.
Clearly fake reviews.
The code can't open
Sir dc voltage 30v salega
yes
01:38 Save time
Error program
Sar mukmmal code send Karen
solo me marca voltage , no sirve
My arduino is giving error of storage issue 😑 while uploading the code
Hi friends
we want bidirectional ampere code
ok bro soon i will make ac meter
this is not work for me
Thumbs down. At about 4:30 you show some components outside of the camera view, and hook something up that changes the displayed voltage, but don't say what you are doing.
What could have been a useful video was ruined by your laziness.
Hello. I congratulate you on the channel, the videos are very didactic to be able to learn with them.
I wanted to know if there is a way to use the special characters from the project ua-cam.com/video/GLSsTk_ffBo/v-deo.html in this using a 20x04 lcd, I'm new to arduino programming and I don't know how I could adapt these characters to this project.
Greetings.
Working batao yaar
ok bro soon
Excellent project