Hello sir! Can you please tell me how to plot the graph of Displacement vs Time for a Linear Static Analysis? Which file to use for Hypergraph? I would be very thankful to you in this regard.
Hello sir! Whenever I unsuppress the suppressed (blue) edges they get green but when I go into 2D-Automesh to mesh that specific surface, the edges again becomes blue and suppressed. Can you please helo me with this?
This is probably an issue with the graphics card and not the application. Please check the minimum hardware requirements to run Altair products. I think that updating graphics drivers will resolve this issue.
Before generating tetra mesh from tetramesh panel you can put the value of tet collapse and growth rate in the tetramesh parameters to avoid the maximum amount of tet collapse after generating tetramesh. In this way you wont have to use fix quality everytime and will save your time.
Whenever, I try to mesh in 2D, using R-Tria, the mesh at curves looks different as compared to what is shown by you. Also, even the results obtained further are different. Please help me out here.
@@Aeroswap Thanks for you reply, but I set it to tetra mesh option on left side but still there is no option to fix 3d element. My hypermesh is of version 14.0, may be that's the problem
Your tutorial is beneficial... Plz upload the video related to control card use in linear and non linear analysis.. And what is the parameter we put in cards..
Sir, Could you take some Mini Projects from Various Big Industries like TATAs, L&T, HAL,ADA, DRDO or any other PSUs or any other BIG MANUFACTURING INDUSTRIES in INDIA and Dump it into this UA-cam Video as an Assignment.. you know, Companies works will be done, and we will experience a Real time Industrial Work Just a Suggestion.
I want to extract nodal forces at the bolting locations in the assembly not at the mounting locations. I used GFFORCE in the output but I got very low forces. Can you please help me out to get the Grid Point Forces?
Hi Muttu, GPFORCE is indeed the correct method to extract grid point forces. The card is quite simple to use and I doubt that it will output incorrect results. I would suggest you to check your boundary conditions to find any errors which might be causing the low force magnitude output. Thanks!
![Frequency Response Analysis using Hypermesh [Optistruct Tutorial]](http://i.ytimg.com/vi/v4Tt-BIz3s8/mqdefault.jpg)
![Topology Optimization using Hypermesh [Optistruct Tutorial]](/img/n.gif)
I am using Hypermesh 2013 version so I don't have the "Fix 3D Elements" option.
What can I do? Can you help me?
Hello sir! Can you please tell me how to plot the graph of Displacement vs Time for a Linear Static Analysis? Which file to use for Hypergraph? I would be very thankful to you in this regard.
3:24 how did you do that
Hello sir!
Whenever I unsuppress the suppressed (blue) edges they get green but when I go into 2D-Automesh to mesh that specific surface, the edges again becomes blue and suppressed.
Can you please helo me with this?
This is probably an issue with the graphics card and not the application. Please check the minimum hardware requirements to run Altair products.
I think that updating graphics drivers will resolve this issue.
Before generating tetra mesh from tetramesh panel you can put the value of tet collapse and growth rate in the tetramesh parameters to avoid the maximum amount of tet collapse after generating tetramesh. In this way you wont have to use fix quality everytime and will save your time.
Yes, that can be another way to do it. It all depends on the preference of the analyst!
Whenever, I try to mesh in 2D, using R-Tria, the mesh at curves looks different as compared to what is shown by you. Also, even the results obtained further are different. Please help me out here.
Fix 3d elements option not available in Tetramesh panel. What should I do?
Make sure that the left side radio button is set on the first option(tetramesh). Only then the fix 3D elements button is visible.
@@Aeroswap Thanks for you reply, but I set it to tetra mesh option on left side but still there is no option to fix 3d element. My hypermesh is of version 14.0, may be that's the problem
Right, I don't think HM 14 has the auto fix feature. If very few elements are failing, you can always go for manual editing to get the job done!
@@Aeroswap I will try doing it manually. Thanks again
i just want to say....Ur great
Your explaning methods is super.Please explain frequency response analysis in your next video
Thank you!
Your tutorial is beneficial... Plz upload the video related to control card use in linear and non linear analysis.. And what is the parameter we put in cards..
Thanks! I will work on these topics soon.
love ur tutorials!
Hey there!
I'm glad you liked them.
Please make a video on Fluid structure coupled analysis example
Thanks for the suggestion. I will work on this topic soon!
Sir, Could you take some Mini Projects from Various Big Industries like TATAs, L&T, HAL,ADA, DRDO or any other PSUs or any other BIG MANUFACTURING INDUSTRIES in INDIA and Dump it into this UA-cam Video as an Assignment..
you know, Companies works will be done, and we will experience a Real time Industrial Work
Just a Suggestion.
sir can we do acoustic study in hypermesh software?
Yes we can. It can be done using Optistruct solver 👍🏻
sir its a open source or licenced one?and can i get ur contact email adress or no sir?
My contact details are provided in the 'About' section of this channel. Feel free to get in touch with me regarding any queries.
@@Aeroswap tq sir
thanks anna
Legend, +++++ Rep
Shortcut keys are not functioning. f10 is not working.
Check the keyboard settings. You might have locked the Function keys!
I want to extract nodal forces at the bolting locations in the assembly not at the mounting locations. I used GFFORCE in the output but I got very low forces.
Can you please help me out to get the Grid Point Forces?
Hi Muttu,
GPFORCE is indeed the correct method to extract grid point forces. The card is quite simple to use and I doubt that it will output incorrect results.
I would suggest you to check your boundary conditions to find any errors which might be causing the low force magnitude output.
Thanks!
Has anyone set playback speed to 0.5 x 🤣
Yep, I did! That is why the newer videos are slower. Please check them out.😉
@@Aeroswap your videos are awesome sir, ❤️🔥🔥🔥🔥,
Thanks :)