Netgear N600 WNDR3400v2 Fix [Does not update. Corrupt Firmware. Reset not working]

Поділитися
Вставка
  • Опубліковано 10 гру 2024

КОМЕНТАРІ • 34

  • @alphathinktink
    @alphathinktink 9 місяців тому

    I got lucky, mine was already flashing green, just wouldn't pull up the management page at all. Didn't have to short the IC. Was able to reflash using this method. Good job.

  • @noanamei4545
    @noanamei4545 Рік тому +1

    Got one of these exact models from eBay very economically - and the last resort ended up working! Thank you.

    • @rodaraguz
      @rodaraguz  Рік тому

      Happy to help you! 😀😊

  • @ddferpaffy3275
    @ddferpaffy3275 Рік тому +1

    amazing! this video was of huge help
    after i closed the contacts with a screwdriver like u showed i was able to get the network interface of the router going, but alas tftpd64 did not work at all, i tried 3 times, ended up using nmrpflash specifying manually the ip and mac and it did work

    • @ddferpaffy3275
      @ddferpaffy3275 Рік тому +1

      just for clarification: it WAS my last resort, i tried everything, the router's network interface was simply not working, it did not connect and i couldn't even ping it let alone open the menu

    • @rodaraguz
      @rodaraguz  Рік тому

      Thank you for your kind words! I am very happy this worked for you as well! It is a little tricky to do and you need patience and some tech skills but you did it! 😀

  • @jenswilkes2515
    @jenswilkes2515 3 роки тому +2

    Thank you Guy, i got the same wndr3400v2, which i killed while fw flash, but not sure for the way to update via putty. Now after i saw your Vid and recognize the blinking LED at my router, it was tight and easy doing a restore of my ddrwrt without any problems ! Hope my english isn't too much bad =D

  • @adamstewart4157
    @adamstewart4157 3 роки тому +2

    Legend. Genius. Mate you are a LIFE SAVER!! It worked on my bricked DGDN3700 as well ...!!!

    • @rodaraguz
      @rodaraguz  3 роки тому

      Thanks! I'm happy it helped!!! : )

  • @BurningLattice
    @BurningLattice 2 роки тому +1

    Hey there my dude, thanks for this Vid. BTW, can one add a high gain external antenna to this router?

    • @rodaraguz
      @rodaraguz  2 роки тому

      I would not buy a high gain external antenna. You are wasting money. Those things don’t make much of a difference at all. i don’t think this router supports it and but it does work very very well on 2.4G. Remember this is a wifi4 released in 2009 We are are at wifi6. I would encourage you to go to Walmart and buy a cheap $60 dollar wifi 6 router. On a 100MB ISP plan you will get 112MB on a wifi 6 router. On a wifi 4 like this one you would get like 60MB tops. Do not buy a high gain external antenna. Watch thiojoe’s video on this. What you could do is buy a wifi6 router and set this one up as an access point.

  • @elijahb551
    @elijahb551 2 роки тому

    Thank you even tho this vid was posted a year ago this help tremendously

    • @rodaraguz
      @rodaraguz  2 роки тому +1

      Np, so happy it helped you!

  • @rodaraguz
    @rodaraguz  4 роки тому +4

    If you tried this and it worked for you, feel free to leave a comment below!

  • @octaviolopez9966
    @octaviolopez9966 2 роки тому +1

    i have the wndr3400v2, i flashed the openwrt but the wifi did not work, i was going to use a modded ddwrt firmware that works with version 2, but when i flashed it with the OG firmware, it bricked, however i did not had to resort to opening the router, the bricked state automatically gave me ttl=100 so i use the tftp and i was able to revive the router, now i was able to flash the ddwrt mod firmware and IT IS WORKING LIKE DANG!!!

    • @Chris-ji8jw
      @Chris-ji8jw 2 роки тому

      Hi Octavio, I have this router; but want to update the firmware. You said you got DDWRT working. Interesting, yeah Tomato claims to make it work. Do you have an FTP server, on the DDWRT Firmware. Is it worth it, compared to the old, original firmware. I saw that link to the new DDWRT (moded). I want to compare the 2 firmwares, to see which one might be better, or have the features that I would be interested in. It is refreshing, to hear that the moded version of DDWRT works, because there is still no official version. Looking forward to hearing from you, thanks!

  • @huhu6759
    @huhu6759 3 роки тому

    what are you showing us? is the video clear to you?

  • @TonyAFC85
    @TonyAFC85 2 роки тому

    When I ping all I get is host unreachable any idea what I can do?

    • @rodaraguz
      @rodaraguz  2 роки тому

      Maybe the cable is not connected properly (sometimes this is the problem) or you disabled the network adapter by accident or have the wrong one enabled. On windows 10, Go to setting and search for "Change adapter options" to check what is enabled and change it to the "Ethernet" controller

  • @johnemersonbacarra2583
    @johnemersonbacarra2583 3 роки тому

    I have mine that kept blinking so I followed this step.
    But now it is still blinking even after I waited 30mins after the flash

    • @rodaraguz
      @rodaraguz  3 роки тому

      Hi, check that your TTLs = 100. Also double check that the firmware is loaded on the TFTP. For some reason it likes to change to something else.

  • @majidali1621
    @majidali1621 3 роки тому

    Hello sir my n600 main net cable port is not working

    • @rodaraguz
      @rodaraguz  3 роки тому

      Hi It's most likely that the pins are bent maybe because the ethernet cable was pushed too hard so they are not making contact. You could try pulling them out very carefully with tweezers or a paper clip to get good contact. If nothing works, it is a waste of time to fix it so its best to buy the newer AX Wifi6 routers which are better and faster even if you don't have Wifi6. This router is kinda old (November 2016) so that is why I decided to fix it the way I did in this video because I was going to buy a newer one anyways.

  • @chemist_playz
    @chemist_playz 3 роки тому

    Please my tenda wifi N301

  • @孙小圣-d8u
    @孙小圣-d8u 3 роки тому +1

    你好,我也使用这款路由器。

    • @Chris-ji8jw
      @Chris-ji8jw 2 роки тому +1

      Tomato and DDWRT have a firmware open source for this router, but the DDWRT version is a (moded) version that is not officially supported.

    • @孙小圣-d8u
      @孙小圣-d8u 2 роки тому

      @@Chris-ji8jw where are you from?

    • @Chris-ji8jw
      @Chris-ji8jw 2 роки тому +1

      @@孙小圣-d8u I am from California, USA.

    • @孙小圣-d8u
      @孙小圣-d8u 2 роки тому

      @@Chris-ji8jw Can you help me get a Google Voice account?

  • @huhu6759
    @huhu6759 3 роки тому

    this is no more working. it didnt work for my netgear r7000....i tried more than 1 month, nothing works. Stay away from netgear people. it is no good router

    • @rodaraguz
      @rodaraguz  3 роки тому +1

      Hi, sorry to hear that. Please remember this video is strictly only for the model listed. It has worked for some people. I don't know anything about the r7000 model.

  • @ducky0069
    @ducky0069 2 роки тому +1

    Question: you have header pins why didn't you flash through cfe? it would have been much safer to do.
    Short pinning the flash chip is one of the worst things to resort to doing, as this will permently destroy the chip and instead of throwing it away, the router should be recycle properly there are hazardious matierials and parts on the pcb.
    I had to thumbs down your vid, it promotes a very risky technique that is dangerous even though this router is quit old it is still used.
    The problem is not firmware related it is the cfe got corrupt and the only way to undo this is to flash through the cfe.

    • @rodaraguz
      @rodaraguz  2 роки тому +2

      Because for CFE you have to buy pins and it doesn't always work, it more complicated to find code and your wasting money and time. Besides this is an old router which is why I short circuited it. I didn't really care about it and i mentioned that in the video. I also said this was a last resort method before throwing it away and buying a new and way better one. And to do this at your own risk. It's worked for me and for some other people as you will see on comments.

    • @ducky0069
      @ducky0069 2 роки тому

      @@rodaraguz You have the header pin already in place on the router shown in the video?
      Yes it does work flashing through the cfe, what commands did you use?
      That is not enough to justify bad advice.