Please use gloves to protect your hand from electric shock! I noticed in the comments there are some low quality machines in the market that have open circuits. Moser original machines are well isolated. Otherwise, please adjust the screw while electric current is off, then turn on the machine to test the sound only. Safety first 🥇:)
S.A brother... You helped me a lot. I bought a Moser 1400 in 2001. I was using it without any problem until last year. That loud noise started suddenly . Thank you very much for this guide. All that noise gone. Now it's like new. 👍
Thank you Sir, it worked for me. I am having the same design hair clipper and it was making too loud noise of metals colliding each other. And now it is running smoothly with zero noise. Thanks again.
hi i have the same trimmer and it’s lever literally never stays at where i put it once the machine starts. it wasn’t like this 2 months ago when i bought it. what can i do to fix this? it just goes back. it does stay for like 5 seconds but suddenly goes flying once it touches anywhere
Well explained, i have moser 1400 Pro, and poweron noise is werry loud. Only when powers on,a loud CLICK can be heard . Can something be done to fix it?
Those Mosers in general vibrate a lot? I had few machines during my life, bought this and it vibrates like crazy if compared to the other toys where you don't almost feel if it's on or not. I would go crazy if I should use this lot vibrating device for work during all day.
dude you dont need to do all this there is an adjusting screw on the machine which is made for this adjustment (the black screw on the top right side of the machine ) you can easely screw it clock or counterclockwise to stop the sound
Ya moalem shokran , I have the same moser 1400 sometimes not shaving , I adjust the black screw at the top right side ,a little bit left or right once the sound becomes less it will cut again.
Yes you can. On the back of the machine near the red spot there are two screws. Release them, then adjust the blade cover as you like. This way you can zero gap the machine.
ADJUSTING SCREW Blade amplitude can change as a result of voltage fluctuations. For lower voltage the blade amplitude can be smaller and for higher voltage bigger. If necessary, by changing the setting of the adjusting screw, you can adjust the blade amplitude yourself. ·· Using the on/off switch, switch on the appliance ·· Turn the adjusting screw in a clockwise direction until you hear a loud noise ·· Then turn the adjusting screw anti-clockwise until the loud noise stops
Sorry to hear that, Use isolation gloves. In fact an open circuit is a sign of a low quality connections. It should be completely isolated. Use gloves or buy a new machine.
Check the joint between the blade and the engine. It may have low noise because the engine is not pushing the blades correctly. So what you need to do in this case is to fit the blade joint correctly into the engine bar.
Please use gloves to protect your hand from electric shock! I noticed in the comments there are some low quality machines in the market that have open circuits. Moser original machines are well isolated.
Otherwise, please adjust the screw while electric current is off, then turn on the machine to test the sound only.
Safety first 🥇:)
How to sharpen the blade?
You can buy a new one. I'm not familiar of ways to sharpen the blade. But it's a good question.
S.A brother... You helped me a lot. I bought a Moser 1400 in 2001. I was using it without any problem until last year. That loud noise started suddenly . Thank you very much for this guide. All that noise gone. Now it's like new. 👍
Great! You have solved my problem. Quite impossible to use the machine due to high noise! Thanks a lot
Thank you Sir, it worked for me. I am having the same design hair clipper and it was making too loud noise of metals colliding each other. And now it is running smoothly with zero noise. Thanks again.
Wow, mine was making this horrid noise out of the box new and the noise freaked me out.
Thanks for sharing, I will definitely try and fix it.👍
Thanks a lot! Really useful. I could solve the problem of the noise. Thanks!
Brilliant and beautifully presented. Thank you.
Clear English spoken is good to understand,and usefull video.
It was in fact useful and saved me a lot of money and time
Short and useful finally thx
Very good, thank you. My old Wahl is not as adjustable as this, but seems internally very similar. Hopefully I can fix my noisy clippers.
Thank you so much it worked perfectly after i fixed as you told in this video... you helped me a lot 😉
شكراً من قلبي الله يوفقك🌹
You are a legend bro
I love youtube 😁. Thanks a lot man!
simple and useful. Thank Your Sir
Thank you so much. It worked
thx bro u re the best
Thanks a lot...sir. from Sri Lanka.
Worked. Thanks pal. I used the same set of gloves as yours ;-). Worked either.
King🔥 Tack you🙏
Great stuff!
Thank you so much it worked perfectly ❤
Thanks a lot. It solved the problem.
Worked for me thankyou very much
Thanks man, it worked
thank you, it actually works 😂
Niice! Thanks for sharing !!
Years that I was searching on how to solve this issue in my Moser 1400: T.H.A.N.K Y.O.U. :D!!!
very useful thanks lot ,but I saw in other video that they replace a foam that I can't see in your Mozer beside vibrating spring
very very very thanks
very helpful😍
Thanks a lot men 👍
Thank you sir it's working
Helped ty
Good video, nice job
Thank you so much 🙏🙏🙏
Thnxx a lot....
Great thank you!
Thanks habibi
hi i have the same trimmer and it’s lever literally never stays at where i put it once the machine starts. it wasn’t like this 2 months ago when i bought it. what can i do to fix this? it just goes back. it does stay for like 5 seconds but suddenly goes flying once it touches anywhere
Thank you ,,❤️❤️
Thank you
Well explained, i have moser 1400 Pro, and poweron noise is werry loud. Only when powers on,a loud CLICK can be heard . Can something be done to fix it?
Very nice technique
Those Mosers in general vibrate a lot? I had few machines during my life, bought this and it vibrates like crazy if compared to the other toys where you don't almost feel if it's on or not. I would go crazy if I should use this lot vibrating device for work during all day.
dude you dont need to do all this there is an adjusting screw on the machine which is made for this adjustment (the black screw on the top right side of the machine ) you can easely screw it clock or counterclockwise to stop the sound
What is the screwdriver that is used called?
Ya moalem shokran , I have the same moser 1400 sometimes not shaving , I adjust the black screw at the top right side ,a little bit left or right once the sound becomes less it will cut again.
Thank you...
Good sir
You can fix it with the screw on the side of the clipper the one on the top right either tighten it or lose it and it will fix the problem
👏👏👏
👍🏻
Thnx for this.
The machine comes with 1 comb where I can find if I need additional comb
Check suppliers of Barber shops tools around you
At Izzat Daouk if you are in Lebanon
why does't wahl do quality checks on their own.. ty for the video !
Can we zero gap the Moser 1400 please sir suggest me it's very thankful
Yes you can. On the back of the machine near the red spot there are two screws. Release them, then adjust the blade cover as you like. This way you can zero gap the machine.
@@AmerMaraqa thank you sir you are great love from india
Sir please give the original product link to buy online 😇
The nice thing to cut the hair with moser is the sound 😂no sound no moser
ADJUSTING SCREW
Blade amplitude can change as a result of voltage fluctuations. For lower voltage the blade amplitude can be smaller and for higher voltage bigger. If necessary, by changing the setting of the adjusting screw, you can adjust the blade amplitude yourself.
·· Using the on/off switch, switch on the appliance
·· Turn the adjusting screw in a clockwise direction until you hear a loud noise
·· Then turn the adjusting screw anti-clockwise until the loud noise stops
i did the method on a replica model called FYC , it worked..
Did this now the blade is only vibrating and making a sound but not cutting
it needs careful adjustment. Send it to a professional or try to do it again with patience
@@AmerMaraqa got it working, didn't push the blade enough forward
@@christoffer98 This is key I think. I only pushed the whole metal part forward and it got rid of the noise :)
sir i solve noise problem but machin stop hair cutting what to do?
Plz do anything by unplugging the trimmer machine
Today i got heavy shock by doing this......🙏
HAHAHAHAHA
Sorry to hear that, Use isolation gloves.
In fact an open circuit is a sign of a low quality connections. It should be completely isolated. Use gloves or buy a new machine.
i open trimmer do what you said trimmer stop working😲
Check the electrical connections. Be sure to take it out of the plug before you test!
I bought mine new, but it is not cutting. It has very low sound. Please advise. Thanks bro! USA.
Check the joint between the blade and the engine. It may have low noise because the engine is not pushing the blades correctly. So what you need to do in this case is to fit the blade joint correctly into the engine bar.
@@AmerMaraqa it's not because of the electric power?
I bought an adaptor but not sure if I have to buy step up step down transformer from 220 to 110.
It can be also because of power
على فكرة الاجانب مش مستنين واحد عربي يقعد يتهته في الكلام يشرحلهم بالعكس المحتوى العربي هو اللي محتاج
bro it is for speeding the coil magnetic motion, the more speed the more noise, its not a problem
noise is from those metals hitting each other, itll shake A lot
That's a fake machine..
Wow, you are playing with death by holding and using screw driver when you disassembled it. This is dangerous and dont recommend it to anybody.
Thank you