Great explanation on Panorama over You tube. Sir I would request to showcase with Staging Firewall configuration real scenario . that would be a great help on this Concept .Thank you !
Awesome explanation Bro, Its's Crystal clear and very helpful. Keep it up bro, Humble request you to make more videos like this... Thanks in Advance :)
@@firewalllife Hi At 24:50 you said Template stack is just a container and we don't do any config changes in Template stack but i guess its wrong. We can make Config changes in Template Stacks. I mean we can override Template config in Template stack.
I have got a PAN 3020 chassis in production and want to migrate its configuration to chassis 820 device, there is no easy way import configuration from 3020 chassis to 820 chassis? In Cisco ASA, it is just matter of 10 to 15 minutes I could migrate the configuration from one firewall to another firewall. In paloalto is is nightmare and there is no assurance one could migrate from older chassis to newer chassis on Paloalto. Administration is nightmare in paloalto.
Thank you for your query. It really helps to improve my contents. I highly suggest you to use Palo Alto migration tool, now available under the name “Expedition”.. You can easily migrate configurations between different models of Palo Alto + Different firewall vendor such as Checkpoint to Palo Alto.
@@firewalllife Yes, I downloaded Expedition and installed on Linux box and I have yet to figure out how to use Expedition. You sounded very much like you are from Sri Lanka.
@@firewalllife I wonder you have used Expedition to migrate configuration to Paloalto ? That would be awesome if you do a demo on Expedition. I have got installed successfully version 20.04, but no clue on how to make use of it.
Struggling .. have to configure my first PA-410 with Panorama 10.1. PA is registered in Panorama and connected, same firmware. Tried for testing simplest template in a stack and assigned to that PA-410, just with one Eth1 to add interface and ip address. But error messagees no matter how i trie .. seigh! Tuesday date with support. Annoying.
Hi Mahesh, using Variables we can add the IP's for interfaces or add different configurations for each firewall using variables $IP, Can you add those to this video if possible.
Very well Explained Sir I have one doubt below, In our environment we do configuration in template and push to Device directly however in this vedeo in Template stack scenario we Pushed to Stack. In template also we have option to pushed to multiple firewalls then is there need of template stack? Sir What is the difference in both cases and which method is better ?
Actually this is a template behavior change happened starting from PAN OS 8.1.. Previous PAN OS versions behavior was to assign managed devices to templates but starting from PAN OS 8.1 you can assign managed devices to template stacks instead of templates. Please refer to below Palo Alto official document. docs.paloaltonetworks.com/pan-os/8-1/pan-os-release-notes/pan-os-8-1-release-information/changes-to-default-behavior/panorama-changes
Great explanation on Panorama over You tube. Sir I would request to showcase with Staging Firewall configuration real scenario . that would be a great help on this Concept .Thank you !
@@sajjadanwer8908 Thank you for you valuable feedback. It really helps. I will.
Easy way to understand . Thanks for the upload
Thanks for the feedback. It really helps to improve contents.
Thank you, its really good video
@@manikanthg6761 Thank you for your valuable feedback. It really helps.
Very good explanation mate. Very helpful
Thanks for the valuable feedback.
Good explanation Mahesh, Its's very helpful
Thank you so much for your valuable comment. It really helps.
Good explanation and it’s very useful
Thank you so much for the appreciation. It helps!
Awesome explanation Bro, Its's Crystal clear and very helpful.
Keep it up bro, Humble request you to make more videos like this...
Thanks in Advance :)
Thank you so much for your valuable comment.
@@firewalllife
Hi
At 24:50 you said Template stack is just a container and we don't do any config changes in Template stack but i guess its wrong. We can make Config changes in Template Stacks. I mean we can override Template config in Template stack.
very useful and nice explanation. keep it up bro. thanks
You are most welcome
Wow amazing channel, thanks mate .
Any suggestions on how to pass PCNSA? Cheers
Thank you for your valuable feedback. Contact me via official email of the channel.
very well explained, thanks.
Thanks for your valuable comment.
I have got a PAN 3020 chassis in production and want to migrate its configuration to chassis 820 device, there is no easy way import configuration from 3020 chassis to 820 chassis?
In Cisco ASA, it is just matter of 10 to 15 minutes I could migrate the configuration from one firewall to another firewall.
In paloalto is is nightmare and there is no assurance one could migrate from older chassis to newer chassis on Paloalto.
Administration is nightmare in paloalto.
Thank you for your query. It really helps to improve my contents. I highly suggest you to use Palo Alto migration tool, now available under the name “Expedition”.. You can easily migrate configurations between different models of Palo Alto + Different firewall vendor such as Checkpoint to Palo Alto.
@@firewalllife Yes, I downloaded Expedition and installed on Linux box and I have yet to figure out how to use Expedition.
You sounded very much like you are from Sri Lanka.
@@LogicStandsBeforeGod Great!. If you need me to do a demo on Palo Alto Expedition please let me know. Yes Thanks.
@@firewalllife I wonder you have used Expedition to migrate configuration to Paloalto ?
That would be awesome if you do a demo on Expedition.
I have got installed successfully version 20.04, but no clue on how to make use of it.
Great explanation BTW are you a Sri Lankan, your accent is so sri lankan
Thank you for the video
Thank you for your valuable feedback.
Hi
Can we push the configuration changes through the tamplate stack?
Yes. This behavior started from PAN OS 8.1. Previous PAN OS versions templates were used to push configuration changes.
Thank you so much for your contribution.
Do you have more trainings for Palo Alto
You can suggest any required topic. Thank for your valuable comment.
@@firewalllife application filters and tags in production))
@@boh70326 Thank you for your valuable feedback.
Struggling .. have to configure my first PA-410 with Panorama 10.1.
PA is registered in Panorama and connected, same firmware.
Tried for testing simplest template in a stack and assigned to that PA-410, just with one Eth1 to add interface and ip address.
But error messagees no matter how i trie .. seigh! Tuesday date with support. Annoying.
Awesome, Awesome, Awesome
Thank you for the feedback. It really helps.
Hi Mahesh, using Variables we can add the IP's for interfaces or add different configurations for each firewall using variables $IP, Can you add those to this video if possible.
Thank you for your valuable comment. We will upload with requested addition asap.
Very well Explained Sir
I have one doubt below,
In our environment we do configuration in template and push to Device directly however in this vedeo in Template stack scenario we Pushed to Stack.
In template also we have option to pushed to multiple firewalls then is there need of template stack?
Sir What is the difference in both cases and which method is better ?
Actually this is a template behavior change happened starting from PAN OS 8.1.. Previous PAN OS versions behavior was to assign managed devices to templates but starting from PAN OS 8.1 you can assign managed devices to template stacks instead of templates. Please refer to below Palo Alto official document.
docs.paloaltonetworks.com/pan-os/8-1/pan-os-release-notes/pan-os-8-1-release-information/changes-to-default-behavior/panorama-changes
Oh I see thank you very much sir for reply
I got it now 🙂
@@dhananjay3974 Thanks for your valuable contribution towards building a collaborative environment for Palo Alto knowledge sharing.