How to replace intake manifold gasket - 1.0 - Aygo, C1, Peugeot 107, Yaris, Sirion

Поділитися
Вставка
  • Опубліковано 7 січ 2025

КОМЕНТАРІ •

  • @peterdisley5327
    @peterdisley5327 7 років тому +4

    Very clear and concise strip, replace and rebuild. If i may just add a very small positive comment to Disconnect the Positive battery lead(make a note of radio code) and place bungs in any orifice that leads directly into the engines bowls. Great video. Peter Disley

  • @simonkvist8661
    @simonkvist8661 4 роки тому +1

    Thanks a lot! Just did this on my girlfriends 107. Took 2 hours, and i'm not even good with my hands/cars.

  • @johndurcan8833
    @johndurcan8833 9 місяців тому

    Good video. Watched this ahead of a similar job on a Yaris, also fitted with the 3-cyl 1KR-FE engine. Looks straightforward. Thanks for uploading 🙂

  • @sheller94
    @sheller94 6 років тому +4

    Cracking video....very straight forward no nonsense tutorial !!

  • @superelectic45
    @superelectic45 7 років тому +3

    I would have been tempted to replace the throttle body gasket too.

  • @gordonmillar998
    @gordonmillar998 4 роки тому +1

    All these videos are mighty! Thanks for taking the time to record them. I wonder if this manifold gasket leek could cause the engine to start and then cut out after 2 seconds, sometimes?

  • @DL5FS
    @DL5FS Місяць тому

    Hello Peter thank you for the Video i must do the same ,but i cant find the wiper arm remove video ?

    • @fixanddrive
      @fixanddrive  Місяць тому

      ua-cam.com/video/kTR20HTn-sM/v-deo.html

  • @fuma87
    @fuma87 4 роки тому

    Great Video!
    My starter looks oily, can that oil also be from the intake gasket?

  • @KiceDz
    @KiceDz 7 місяців тому

    Great video! I'll need to do this to my Aygo because i have LPG system on it.
    I already cleaned my MAF and Throttle body from carbon deposits.
    But the LPG system has Lubrication System right behind the Maf sensor and it mixed Oil with carbon deposits and probably theres too much lubrication inside the intake manifold.
    Has anyone experienced this?

  • @fabiopinzani3044
    @fabiopinzani3044 11 місяців тому

    ...bel lavoretto bravo! Che benefici hai riscontrato dopo avere cambiato la guarnizione? Grazie, ciao

  • @leejameshunter8992
    @leejameshunter8992 7 років тому +3

    Will this be the reason I have a loud sucking/vacuum sound coming from the left hand side rear of the engine that I can't pinpoint? On idle/tickover. It's still running fine but you can hear the vacuum for about 4 seconds after the engine is turned off. I've checked all hoses & connectors & its not them.

    • @fixanddrive
      @fixanddrive  7 років тому +5

      Possibly, however if the manifold gasket is leaky, you should have a signs of oily stuff somewhere around the manifold, do you? And there are two hoses running to the manifold at either sides, are sure it's not one them? My brother has a sucking sound and it occured to be the hose between the mainfold and the brake pump being split.

    • @leejameshunter8992
      @leejameshunter8992 7 років тому +4

      I managed swapping the gasket as per your instructions, I was pretty amazed really that it still ran ok as the gasket was completely flattened & it also had a piece about 5mm completely missing from the top of number one cylinder just by the location tab, which was the source of the loud sucking sound. Cheers for the information.

  • @luissamouco2518
    @luissamouco2518 2 роки тому

    Great video! I have found out that my engine is leaking oil from the intake manifold but what I don’t understand is why there is oil in there. I have tested my pcv valve and it seems fine. Why would it than leak oil?
    Thanks! Great video

    • @fixanddrive
      @fixanddrive  2 роки тому +1

      There is oil in there in every car. That's an oil/air mixture.

    • @luissamouco2518
      @luissamouco2518 2 роки тому

      Thank you for the reply! I will definitely try to fix this next week 😂

  • @mikeallan7814
    @mikeallan7814 5 років тому +2

    Were the oil is coming from to the intake manifold?? Its strange...

  • @patrickdedoehetzelver1960
    @patrickdedoehetzelver1960 11 місяців тому

    they are not always the same in construction, mine c1 intake has 5 fastener on the intake

  • @KhalifaManFarms
    @KhalifaManFarms Місяць тому

    Please why there’s oil on my spark plugs . I have Aygo 2007

  • @importuner12
    @importuner12 4 роки тому

    Is the Dirt inside the cylinder Head at around 5:20 coming from the intake manifold gasket or EGR valve? My C1 looks exactly Like that wondering if its a normal Thing or bad for the engine.
    Very helpful Video btw thanks a Lot!

    • @fixanddrive
      @fixanddrive  4 роки тому

      all the dirt covering the engine head and block comes from the leaking inlet manifold gasket.

  • @mikeallan7814
    @mikeallan7814 5 років тому +1

    Is this intake manifold variable??

  • @madylovesyou26
    @madylovesyou26 Рік тому +1

    Thx!

  • @hardcoretam
    @hardcoretam 8 місяців тому

    What are the symptoms of a leaking intake manifold gasket on one of these engines?

    • @fixanddrive
      @fixanddrive  8 місяців тому

      Just an oily mess running down the engine block.

    • @hardcoretam
      @hardcoretam 8 місяців тому

      @@fixanddrive I can smell petrol when driving my dads one but only when fans are on ans it's in slow moving or stationary traffic. No visible leaks so wondering if it could be this as well

  • @aronfisker9537
    @aronfisker9537 4 роки тому +1

    The job can be done without removing wiper arm and scuttle panel. 🤤

  • @Hellaorj
    @Hellaorj 5 років тому

    Can somebody explain me why he is changing this gasket

    • @fixanddrive
      @fixanddrive  4 роки тому

      it got leaky

    • @crpth1
      @crpth1 4 роки тому

      At 4:50 there's some good images, where the completely flattened gasket is quite evident.
      FYI Any rubber gaskets, O-rings, etc. should be supple and flexible. The moment they get deformed, rigid and brittle the time to change them is long gone! Cheers

  • @EXGLMeverts
    @EXGLMeverts 6 років тому

    Fuck,,, i hate it that the c1 aygo and 208 are not an injection engin