Dear Snowball Engineering,hi this is Declan O Shaughnessy Galway Ireland simply a 100% well done job took everything into account and produced a great job 👍👍👍 cheers Declan 👍🙏🙏
Ahhh the good old JCB engineering strikes again. I have seen so many JCB excavator booms cracking, simply because there isn't enough metal. And the holes or bores are to close to the edges. As an aircraft mechanic this is one of the first things you get taught. Space your holes far enough from each other and not to close to the edges.
We live not too far from JCB operations. You might have thought the schools would be throwing everything into a mathematical or technical education. Only 2 kids at my sons school took further maths A level, my lad and another girl, the vast majority are learning to tap dance, rap or play the banjo. No wonder we are in the mess we are.
Just found you, my dad welded farm equipment for a living until he passed, and I never understood what he exactly did, apart from that it was heavy, sometimes backbreaking work, that there was a lot of smoke and light, and that it was dangerous. Until now. The light just went on as I watched this. I respect him now more than ever for what he did to put bread on the table, and it saddens me that he never passed on his skill. Thank you for putting this on UA-cam.
Sorry to say it but, maybe if you had gone out of the house and offered to help him, you’d have learned a valuable trade while you had the chance. He probably asked or even begged you to help and show some interest but you probably refused and your mother always took your side and he just gave up because it was easier to work alone than have to fight both you and your mother. I see it all the time.
@@williamthomas9463totally agree with you, when I was a kid my dad couldn’t get rid of me, whatever he was doing I was helping. I’m always in my garage now working on engines and vehicles, or in the house fixing things, putting up shelves, plumbing etc. If I say to the boy’s to help or to learn they are not interested, or they get bored after 5 minutes because working on a vehicle or engine doesn’t involve an app I worry about the future generations, less and less skill It’s all about making silly video’s and being an influencer nowadays. I stumbled on snowballs video’s and have been hooked, no messing about and playing up to the camera for entertainment and views, just honest skilled work. a lot of skill from a young man He needs more sponsors to give him some modern machines so he can do more.
I’m a IT-manager, working in an office my entire life. I’ve watched all your videos now and it’s so much more interesting than what I do. Excellent craftmanship! Thank you for sharing.
I use to be an analyst programmer but i have quit and now run my little goat homestead providing my family with 100% organic food. I buy up old equipment (tractors, excavators and such) and restore them. Ofcourse on a smaller scale and level then snowball. I'm always surprised at how many other IT'ers do this kind of 180° turn in life. For myself i felt like life was passing me by, every day is the same. There is always the next project and an office is such a politicaly hazardous enviroment. But then that was just me.
I do like the procedures that you employ to make things come out right. One example is using runoff tabs. I do not see many people in the general repair shops I haunt use them when they should be. (yes I use them). I find that many,( not all) people on You Tube tend to cheat on good procedure when making repairs. Those small things such run as run off tabs, bracing, line up tabs, proper root opening etc... do make a big difference the end and don't take all that much longer to do. Well done and well presented sir. Cheers
Well said sir, you took the words right out of my mouth. For "a bloke in a shed" he does well thought out work. Better than some of the bigger fab shops I have audited.
Nice shot there at 1:58 with the building and the sky. Sun, perspective, thirds, textures, colors, everything. Plus the alien with the Laser Wappen of course.
@@snowballengineering Perhaps in your circle of friends and acquaintances but having worked with and on heavy equipment all of my life I've seen far too many jobs like this butchered because one step of the puzzle was left out. Don't sell yourself short!
Nice work. The setup gauge for your line bore brought a smile to my face. People who buy shiny tools off the tool trucks look at tools like that and wonder what someone was thinking. I see it applied and say "Well Done"
I like your frugal line boring setup. The thrust bearings in the drill aren’t designed to be stressed in the reverse direction. The purpose built commercial line boring power heads are ridiculously expensive! Nice repair.
Great Tradesman. CEE has clock in the background just to give viewers an accurate indication of how long this type of work actually takes. It is time consuming. You guys have to be fit to stand up all day doing this hard work. Well Done.
At the 1st of the video when you were cutting those ears off, my thought was that you had been taking lessons from Issac, I C Weld. You’re as good as he is. I couldn’t even get close. Thank you Sir.
Just came across your channel you do brilliant work and good to see someone like this here in the uk You and cutting edge engineering would be a great team
Coming from CEE, my first impression after the first few seconds was that this place needs a real cleanup. At least for me, it would have made the video more enjoyable to watch if the work area/shop and work item were tidy and clean(ish). But thats me, I'll bet most people dont care :)
@polarbearchimney8128 CEE is on a totally different planet than this outfit. not suitable to use the word engineering here. CEE does things correctly, has the skills, knowledge, and equipment to do a precise job. on this channel, I don't see the safety officer anywhere
@@polarbearchimneygive the lad a break, he is doing a fantastic job, no bodge work in this workshop just true honest precision work all on his own working for himself. Not many of his kind around. The old saying a workshop too tidy equals not enough work. Congratulations Oliver on your hard work.
I am constantly amazed at the ability of you practical guys. Me, I'm a plant man but i'm fascinated when watching metal working and machining videos Thanks for the entertainment and all the best in your future
I agree. That is why the drillpress is without a drawbar but a mill has one. The force when you push the drill against the workpiece keeps the taper in place. In these kind of jobs my personal opinion is that pushing is superior to pulling. But everyone is free to do as they see fit 👍🏼😋!
Looking good! One small tip -that'll save you a little money; Put your camera behind a welding filter or the arc will burn the photo-sensor- (EDIT) Ookay, since others have made it clear the reason my cameras failed can't have been due to the sensors getting burned, I'll append to this post: Using a filter will make it easier to see the welding without the arc whiting everything out... And thank you @SCH sch What you said made sense and offered a probable cause to why my camera's crapped out on me
@@GaisaSanktejo CMOS sensors are not susceptible to optical damage from welding level light, though high power lasers can damage the sensor (metal cutting power levels) Maybe the damage was from electrical noise/EM radiation from the particular welding setup you were photographing.
I quite thank you for the views to such quality. In particular the guide points as line boring. *The choice to pull the cutter rather than push to cutting surface was a key bit. Also, where the weldment had an end pad, later discarded, to allow for the weld to best finish. While I seldom now execute such large jobs, I try to learn best technique and you meet and exceed as the best worksmanship. I simply hope to meet the standard you set as delivery to customer. My personal regards. McGary
Our JCB 320 did the same thing i priced out a new replacement for it and it was 4500 bucks so i did the same thing you did come out good and works well .
UA-cam recommended me to your channel. This is the first video I've viewed. My instant impressions are - that you are highly skilled and talented. I learned alot about something I know next to nothing about and I totally respect how you did a high quality job and at the same time improvised with what equipment you had. All in all I really enjoyed it. Thank you! - I just subscribed!
Never thought about using a mag drill for a line boring but in this application it works beautiful you’re really not doing hydraulic cylinders where it has to be attached to the cylinder end very impressive work
Really enjoyed the video. It was very informative. I was wondering if it would be possible to let us know how many total hours were invested in this project. Thank you for sharing your knowledge and experience. Keep up the good work.
If there is enough room in the opening to fit those thicker ears. It makes you wonder why JCB continue to use the skinny ones. Perhaps they just hope people will keep buying new buckets. Another good video. Enjoying your channel.
Baffles me, it’s not like it’s a one off problem, it’s a common issue and has been for years. Must be to save money, lasts long enough to be out of warranty then it’s not their problem. Thanks!
Great work fella. Whilst you said the chatter didnt effect surface finish, Ive found you can rap the boring bar to absorb chatter with either rope and tape, sheet lead & hose clamps or leather'n tape. And if the magbase drill speed can be reduced, try that. Whilst not in a lathe, Ive found with chatter on finish cut on lathe work one can choose a small radius tip cutting tool.
First class repair - better than a new one. Looks as though that profiler has already paid for itself in a previous life but my mate has one even older. Only just discovered your channel - makes a change from listening to Aussie accents.
What a great honest channel. Zero BS and just humble quality content. Subscribed ✔️ Another useful tip for you. Be careful you don't damage your camera sensor. Bright light such as arc gouging welding is the same as a laser and can kill a camera with the electronic version of arc eye. Try to mount a sheet of welding glass in front of the camera
@Snowball Engineering it's easy to burn the sensor and lose pixels from light exposure from welding etc. A camera sensor is very similar to a human eyeball and the light intensity will cause damage
It’s taken jcb themselves a long time to overcome the issue. They cut them out of thicker plate now and make the opening wider on the front of the machine.
CAD, cardboard aided drawing, old but still works, especially if your out in a field with no power. Your welds look like wax was melted into the groove, perfect. I have a lot to practice, problem is I don't do it every day, maybe once or twice a month at most.
Pulling the tool through puts the bar under tension reducing bending, pushing the tool through can cause the bar to bend just slightly but it's enough to notice.
Great outcome on a tricky repair,have you ever needed to back gouge a repair when you have the room to do it,good to see you working to a tolerance of 3/4 mm have seen to many repair panels getting left wide as much as 10mm then the put ceramic tiles on back ,just lazy in my opinion,keep them coming bud regards🛠️🚜🇬🇧🏴
The mag drill line boring jig was and excellent tip for DIYers! I also really liked the vise grip clamp on depth gauge to set tool height Both excellent.
Hi from Sweden. For some reason i only just now saw your channel. And damn if you dont do amazing work, it might look a little sketchy at times but as you say "it gets the job done". Really impressed with your skill
JCB has made good machinery for decades. Seems the bean counters are cutting back the amount of metal required for longevity. Have to pay for those offices in those glass towers somehow.
Common fault done 3 of these in the last 12 months. Got all the templates saved for the whole tip link bracket. Got it down to 4 hours to replace. Nice bit of inline boring but what about the main pivot on the headstock. Looking like that needs attention too
I have the template for the pin and cone. Got 4 in the yard which have either had the pin come out or broken out. Customer didn’t want the main pivot doing.
@@snowballengineering 2 have been where the pins pulled though n 1 where the material completely failed and had sheared off completely. Matbro doo the same done a couple of those too😂
Can we all just take a moment to appreciate the fine work this guy has done in his garage workshop, not a multi million built factory and while constructive criticism is ok I don't think he posted this to listen to people go on and on bout the line bore, in the time ye all took to get yer 2cents worth he done it,,, so it works ,,,,, so next time he posts something and ye get the urge to critic,,,, best just write to santa,, he has a whole year to listen to yer sh#it
Dear Snowball Engineering,hi this is Declan O Shaughnessy Galway Ireland simply a 100% well done job took everything into account and produced a great job 👍👍👍 cheers Declan 👍🙏🙏
So many techniques in one repair. I admire people like you. Well done.
Your an underrated channel , the quality of your work is top notch !
Thanks!
Impressed with the home made line borer, nice work
Ahhh the good old JCB engineering strikes again.
I have seen so many JCB excavator booms cracking, simply because there isn't enough metal. And the holes or bores are to close to the edges. As an aircraft mechanic this is one of the first things you get taught. Space your holes far enough from each other and not to close to the edges.
Mr Bamford was a big backer of Brexit - these people are not known for their inteligence.
But then, you have accident investigation committees round the corner. They don't. (LOL)
We live not too far from JCB operations. You might have thought the schools would be throwing everything into a mathematical or technical education. Only 2 kids at my sons school took further maths A level, my lad and another girl, the vast majority are learning to tap dance, rap or play the banjo. No wonder we are in the mess we are.
Just found you, my dad welded farm equipment for a living until he passed, and I never understood what he exactly did, apart from that it was heavy, sometimes backbreaking work, that there was a lot of smoke and light, and that it was dangerous. Until now. The light just went on as I watched this. I respect him now more than ever for what he did to put bread on the table, and it saddens me that he never passed on his skill. Thank you for putting this on UA-cam.
Yes this is a issue for the future, im a farmer and the new young generation of workers not my cup tea.
Sorry to say it but, maybe if you had gone out of the house and offered to help him, you’d have learned a valuable trade while you had the chance. He probably asked or even begged you to help and show some interest but you probably refused and your mother always took your side and he just gave up because it was easier to work alone than have to fight both you and your mother. I see it all the time.
@@williamthomas9463totally agree with you, when I was a kid my dad couldn’t get rid of me, whatever he was doing I was helping. I’m always in my garage now working on engines and vehicles, or in the house fixing things, putting up shelves, plumbing etc.
If I say to the boy’s to help or to learn they are not interested, or they get bored after 5 minutes because working on a vehicle or engine doesn’t involve an app
I worry about the future generations, less and less skill
It’s all about making silly video’s and being an influencer nowadays.
I stumbled on snowballs video’s and have been hooked, no messing about and playing up to the camera for entertainment and views, just honest skilled work. a lot of skill from a young man
He needs more sponsors to give him some modern machines so he can do more.
Great work. Ingenious line boring set up. Top Marks.
I’m a IT-manager, working in an office my entire life. I’ve watched all your videos now and it’s so much more interesting than what I do. Excellent craftmanship! Thank you for sharing.
Glad you like them!
But we are warm and dry in a heated workspace and baby soft hands...
I use to be an analyst programmer but i have quit and now run my little goat homestead providing my family with 100% organic food. I buy up old equipment (tractors, excavators and such) and restore them. Ofcourse on a smaller scale and level then snowball. I'm always surprised at how many other IT'ers do this kind of 180° turn in life. For myself i felt like life was passing me by, every day is the same. There is always the next project and an office is such a politicaly hazardous enviroment. But then that was just me.
If you like this channel, you should watch Kurtis over at CEE...same line of work, much bigger machines
@@snowballengineering why didnt you use a stick welder?
I do like the procedures that you employ to make things come out right. One example is using runoff tabs. I do not see many people in the general repair shops I haunt use them when they should be. (yes I use them). I find that many,( not all) people on You Tube tend to cheat on good procedure when making repairs. Those small things such run as run off tabs, bracing, line up tabs, proper root opening etc... do make a big difference the end and don't take all that much longer to do. Well done and well presented sir. Cheers
Well said sir, you took the words right out of my mouth. For "a bloke in a shed" he does well thought out work. Better than some of the bigger fab shops I have audited.
I love welding with dual shield. It’s like welding 7018 really fast.
Nice shot there at 1:58 with the building and the sky. Sun, perspective, thirds, textures, colors, everything. Plus the alien with the Laser Wappen of course.
The channel is coming along nicely now, lots of new subscribers. You could say it’s beginning to snowball 🤗
I love how clean the edge is from the motorized torch cuts. My dad had a motorized trolley that carried a torch along with it. Good stuff.
Absolutely top quality work, wish there were more people with your skills, so few folks with your knowledge. Thank you for sharing this with us.
There’s plenty with the knowledge just not many with a UA-cam channel as well 😆
@@snowballengineering Perhaps in your circle of friends and acquaintances but having worked with and on heavy equipment all of my life I've seen far too many jobs like this butchered because one step of the puzzle was left out. Don't sell yourself short!
Awesome work man. People like You make this world function.
Thank you!
Nice work. The setup gauge for your line bore brought a smile to my face. People who buy shiny tools off the tool trucks look at tools like that and wonder what someone was thinking. I see it applied and say "Well Done"
Thanks! It does the job for now. I don’t plan on it being my long term solution to line boring but the proper set ups are quite expensive.
I like your frugal line boring setup. The thrust bearings in the drill aren’t designed to be stressed in the reverse direction. The purpose built commercial line boring power heads are ridiculously expensive! Nice repair.
Very expensive! Could break 30 mag drills before getting to the price of a proper line boring machine 🫣
Great Tradesman. CEE has clock in the background just to give viewers an accurate indication of how long this type of work actually takes.
It is time consuming. You guys have to be fit to stand up all day doing this hard work. Well Done.
Love the way how you converted a drill for line borer :)
At the 1st of the video when you were cutting those ears off, my thought was that you had been taking lessons from Issac, I C Weld. You’re as good as he is. I couldn’t even get close. Thank you Sir.
I’m certainly not as good as icweld with a cutting torch. That man is a machine!
Very nice repair. This is how it should have come from the factory.
solid wire mig is the GOAT for filling big gaps. love your work friend
I've never seen line boring done like that, I've only seen the newer techniques.
Good stuff!
A good strong repair, better than the OEM.
Realy nice to see a pro doing a job. 👍💪
Very decent finish at the holes you linebored👍 thx for sharing 👍
Just came across your channel you do brilliant work and good to see someone like this here in the uk
You and cutting edge engineering would be a great team
Thanks!
Coming from CEE, my first impression after the first few seconds was that this place needs a real cleanup. At least for me, it would have made the video more enjoyable to watch if the work area/shop and work item were tidy and clean(ish).
But thats me, I'll bet most people dont care :)
@polarbearchimney8128 CEE is on a totally different planet than this outfit. not suitable to use the word engineering here. CEE does things correctly, has the skills, knowledge, and equipment to do a precise job.
on this channel, I don't see the safety officer anywhere
Don’t forget topper machine and arc one welding and Keith Rucker
@@polarbearchimneygive the lad a break, he is doing a fantastic job, no bodge work in this workshop just true honest precision work all on his own working for himself. Not many of his kind around. The old saying a workshop too tidy equals not enough work. Congratulations Oliver on your hard work.
I am constantly amazed at the ability of you practical guys. Me, I'm a plant man but i'm fascinated when watching metal working and machining videos
Thanks for the entertainment and all the best in your future
The gearbox noise may be because you are pulling. The thrust bearings are designed for quill extension, not retraction.
Agree made to push and not pull, all drilling machines it would need dual thrust bearings to work long term
I agree. That is why the drillpress is without a drawbar but a mill has one. The force when you push the drill against the workpiece keeps the taper in place. In these kind of jobs my personal opinion is that pushing is superior to pulling. But everyone is free to do as they see fit 👍🏼😋!
😊😊
Very good video, hope your channel does well! I’ll keep watching to see how you do.
An amazing amount of work to get that back to usefulness again... Thumbs Up!
Excellent workmanship as always 👏🏻👏🏻
Another good one . Great down to earth no bullshit channel . Cheers 👍👍👍
Thanks!
Great fix my friend
Regards
Steve UK London
Looking good!
One small tip -that'll save you a little money; Put your camera behind a welding filter or the arc will burn the photo-sensor-
(EDIT)
Ookay, since others have made it clear the reason my cameras failed can't have been due to the sensors getting burned, I'll append to this post:
Using a filter will make it easier to see the welding without the arc whiting everything out...
And thank you @SCH sch What you said made sense and offered a probable cause to why my camera's crapped out on me
I didn’t know that, thanks for the tip!
@@snowballengineering You're welcome 👍👌
utter rubbish - the arc wont harm a CMOS sensor at all - ignore that made up advice.
@@mattsan70 fine, but something associated with welding killed two of my camera's. If it wasn't the light caused by the arc, care to explain what did?
@@GaisaSanktejo CMOS sensors are not susceptible to optical damage from welding level light, though high power lasers can damage the sensor (metal cutting power levels)
Maybe the damage was from electrical noise/EM radiation from the particular welding setup you were photographing.
Your line boring is very slick well done you guys run circles around abom
I quite thank you for the views to such quality. In particular the guide points as line boring. *The choice to pull the cutter rather than push to cutting surface was a key bit. Also, where the weldment had an end pad, later discarded, to allow for the weld to best finish. While I seldom now execute such large jobs, I try to learn best technique and you meet and exceed as the best worksmanship. I simply hope to meet the standard you set as delivery to customer. My personal regards. McGary
Another Nice Job.
You did a great job with what you have available. 👍
Nothing wrong with that setup, if it’s “reet” it’s reet isn’t it, spot on that 👌
Great to watch,good explanations and good editing thanks
Our JCB 320 did the same thing i priced out a new replacement for it and it was 4500 bucks so i did the same thing you did come out good and works well .
Definitely worth repairing when new are that expensive.
This channel is going places. Sticking around so I can say I was here before 3k when he hits a million
Excellent workmanship absolutely brilliant fair play new subscription
Excellent job, great video, keep'um coming..
Superb quality craftsmanship, thank you so much for sharing your skills 🙏🇦🇺👍
UA-cam recommended me to your channel. This is the first video I've viewed. My instant impressions are - that you are highly skilled and talented. I learned alot about something I know next to nothing about and I totally respect how you did a high quality job and at the same time improvised with what equipment you had. All in all I really enjoyed it. Thank you! - I just subscribed!
That’s great to hear! Thanks very much!😁
Yet another example of "modern" design taking a backwards step. Great repair though , & better than when it left the factory.
Lovely job on that better then new thanks.
You've done a shit ton of work there! Great job.
Never thought about using a mag drill for a line boring but in this application it works beautiful you’re really not doing hydraulic cylinders where it has to be attached to the cylinder end very impressive work
Nice repair!
Really enjoyed the video. It was very informative. I was wondering if it would be possible to let us know how many total hours were invested in this project.
Thank you for sharing your knowledge and experience. Keep up the good work.
Very nice work brother.
Thanks 👍
If there is enough room in the opening to fit those thicker ears. It makes you wonder why JCB continue to use the skinny ones. Perhaps they just hope people will keep buying new buckets. Another good video. Enjoying your channel.
Baffles me, it’s not like it’s a one off problem, it’s a common issue and has been for years. Must be to save money, lasts long enough to be out of warranty then it’s not their problem. Thanks!
A good repair stronger than new.
well done great work just found your channel looking forward to your videos great work
Thanks!
Great work fella. Whilst you said the chatter didnt effect surface finish, Ive found you can rap the boring bar to absorb chatter with either rope and tape, sheet lead & hose clamps or leather'n tape. And if the magbase drill speed can be reduced, try that. Whilst not in a lathe, Ive found with chatter on finish cut on lathe work one can choose a small radius tip cutting tool.
Thanks for the tips!
Good to see you get rid of the impurities between laying each weld.
Got to do with dual shield to get rid of the slag.
Why switch to dual shield why can u not go all the way with the same as root pass and can the dual be ran in same welder, class work,
First class repair - better than a new one. Looks as though that profiler has already paid for itself in a previous life but my mate has one even older. Only just discovered your channel - makes a change from listening to Aussie accents.
It has certainly earned its keep!
Just a Yorkshire accent instead.
No one is making you listen to Aussie accents Engineering done well is acceptable in any language or accent.
Wow top man.....love your way of working.
I found your site as recommended site, oh boy were they right to do that
Welcome!
What a great honest channel. Zero BS and just humble quality content. Subscribed ✔️
Another useful tip for you. Be careful you don't damage your camera sensor. Bright light such as arc gouging welding is the same as a laser and can kill a camera with the electronic version of arc eye. Try to mount a sheet of welding glass in front of the camera
Thanks!
Someone else said about damaging the camera but then someone else said it would be alright 🤷♂️
@Snowball Engineering it's easy to burn the sensor and lose pixels from light exposure from welding etc. A camera sensor is very similar to a human eyeball and the light intensity will cause damage
Great fix, there are still (new) aftermarket headstocks being sold that repeat the same design flaw. Buyer beware!!
It’s taken jcb themselves a long time to overcome the issue. They cut them out of thicker plate now and make the opening wider on the front of the machine.
Nice job! Love the boring setup 👌🏼
Super job! Real engineering!
Lovely job
CAD, cardboard aided drawing, old but still works, especially if your out in a field with no power. Your welds look like wax was melted into the groove, perfect. I have a lot to practice, problem is I don't do it every day, maybe once or twice a month at most.
Pulling the tool through puts the bar under tension reducing bending, pushing the tool through can cause the bar to bend just slightly but it's enough to notice.
Very nice work sir!
Great outcome on a tricky repair,have you ever needed to back gouge a repair when you have the room to do it,good to see you working to a tolerance of 3/4 mm have seen to many repair panels getting left wide as much as 10mm then the put ceramic tiles on back ,just lazy in my opinion,keep them coming bud regards🛠️🚜🇬🇧🏴
Damn good job Oliver. Common sense, creative mind, not afraid of work. You will do well.,
Solid repair man
Nice gouging and clean cuts..
Well done mate!
Good job. Keep making part two.
The mag drill line boring jig was and excellent tip for DIYers! I also really liked the vise grip clamp on depth gauge to set tool height Both excellent.
Saves having to spend 15k+ on a line boring set when you don’t use it many times a year, although I do find myself doing more and more line boring.
@@snowballengineering Agreed, This is the route I will go for now
Hi from Sweden. For some reason i only just now saw your channel. And damn if you dont do amazing work, it might look a little sketchy at times but as you say "it gets the job done". Really impressed with your skill
Thanks!
Nice work 👍 What amps are running for the root and then fill passes?
You are very innovative. Great content
Glad you think so!
Your repair is what the factory should have built
Amazing "homemade" line boring rig! Subbed.
Thanks and welcome!
Good work! I love your gas cutting machine :-)
First time watching, very good work. Every time I watch a video I learn something new .
👍😉🇺🇲
Welcome aboard!
that's a great idea with the mag drill
Great stuff, glad to have discovered your channel. Subscribed 🤜
Welcome aboard!
Nice work! I can see the cutting was done on a very cold day!
Still worries me matching the arc without wearing a screen!
Thanks, -3c 🥶
@@snowballengineering I can see how long it took to get some heat in there!
Darn nice job !!
I always liked airarc gouging, kinda like a light Sabre.
great fix solid job
Top job young man!
Thanks!
Nice work 👍
JCB has made good machinery for decades. Seems the bean counters are cutting back the amount of metal required for longevity. Have to pay for those offices in those glass towers somehow.
Yes, also depends on what the machine gets used for as well. Jobs that require high tear out forces put a huge amount of strain on the headstock.
Awesome video thanks for your time and consideration top job 🛠️🔧🚜🚛
Thanks for watching!
Enjoyed the tutorial thanks ,subscribed
Thanks for the sub!
You kind of wonder if the factory sleeved the bore like they did the lower mount, it might have not broken.
Common fault done 3 of these in the last 12 months. Got all the templates saved for the whole tip link bracket. Got it down to 4 hours to replace. Nice bit of inline boring but what about the main pivot on the headstock. Looking like that needs attention too
I have the template for the pin and cone. Got 4 in the yard which have either had the pin come out or broken out. Customer didn’t want the main pivot doing.
@@snowballengineering 2 have been where the pins pulled though n 1 where the material completely failed and had sheared off completely. Matbro doo the same done a couple of those too😂
Tricky fix... Very nice fix...
love to see proper engineering
Can we all just take a moment to appreciate the fine work this guy has done in his garage workshop, not a multi million built factory and while constructive criticism is ok I don't think he posted this to listen to people go on and on bout the line bore, in the time ye all took to get yer 2cents worth he done it,,, so it works ,,,,, so next time he posts something and ye get the urge to critic,,,, best just write to santa,, he has a whole year to listen to yer sh#it
nice work