I'm impressed with both trucks. The kids launched them, ordered a burger and fries, ate, then landed. Seriously, the kids have enough flight time to have earned their pilots licenses. Great Video.
Jack did abuse it for sure 😂😂 said when we got it it had some great designs, but weak materials let it down, take them away and its far better, the tower to tower brace still needs some work at the ends though
Hello can you help me please I have the Dbxl clean 2.0 gas buggy and I need shock oil and I don’t know what weight or what kind to go because I never bought shock oil befor like what kind and weight do you recommend? I don’t really race it,, Thanks. Mark
The manual will tell you what weight to use page 26 www.horizonhobby.com/on/demandware.static/-/Sites-horizon-master/default/dwad0f3a0d/Manuals/LOS05020-Manual-EN.pdf then you can choose any make you want for the silicon oil
That was one hell of a bash session no doubt!!!! Both really held up well but I’ve got to give it to the team corally seeing that it doesn’t have nearly the amount of upgrades that the Arrma has and took way more abuse … Dave you really stepped up your bash game with that one ☝️ well done Calen and Jack that was freaking awesome 🤩 🔥💯💯
Hard to say on this one.... The Corally got absolutely destroyed in those landings but the towers bending was to be expected with 3x lending on the roof flat from that height. If they both took the same hits then you could judge.... But honestly they both did quite well considering. To be fair the Corally held up well to that and performance wise was neck and neck with the EXB ignoring the slight height gain because assumed more weight of the rig. Both outstanding rigs and maybe your biased against the Corally is starting to fade 😂 calling it the weakest RC in the beginning 🤣😂 Yeah if your launching it into the trees 🤣😅😍😍😍 love ya.... Poke😚😂😂 Them steering rods and Turnbuckles needed to go on the Corally as I mentioned.... Thats small easy fix.... And nice one on the shock Standoffs 👍.... Your boys were doing great besides the few launches they either didn't care or lost track of the rig spinning so much which is understandable 👍
Calling it the weakest is a bit of a joke, just adds to the fun really 😂 although up until this point it hadn't faired well considering being marketed as an Extreme Basher, but did say when we first got it that is had some great designs and look promising, yet it was let down by lower quality materials, we have now replaced most of these and it does hold up really well. Have to say that i think if the Kraton had landed like that to bend the front shock tower the front bulkhead would have been toast, super impressed with the bulkhead holding up like that and the way it has crews with nuts on the end to hold it all in place 👍👍 Tower to Tower Brace still needs some work though, we have beefed it up but it still needs better and stronger attachment points at the ends. TM also really need to sort out their parts support, still waiting on parts to come in stock 2 months later as this video was actually shot in April and still not got the parts to fix it all 😥 To be honest i think Jack was just on a mission and partly he lost count of the flips as well 😂😂
Thanks dude, yes the EXB was a lot less of a drain on the wallet, still waiting on parts for the Kronos sadly. Had a fun day out and that's what counts.
Man, with that abuse, I just can't believe that these rigs wouldn't explode into a million pieces. I treat my rigs better now after watching crazy videos like these. Too expensive to keep up with giant jumps that go wrong. I do them less and less. Thanks for the carnage! 😂👍
Its fun to do every now and again, not something we do every weekend though, in fact have really had a car to proper fix in a long time, thanks for watching 👍
I landed my kraton exb like kev did on his talion exb. Mine had a metal gearbox stock exb chassis but with a TPU 3D printed wing mount. Damage report broke the chassi brace bolt. Chassi slightly tweaked but i think it was already like that. The wing mount i believe saved it. It didnt even receive a scratch
Those sorts of landings are brutal, i was there when Kev did his, or should i say Martyn did it 😂😂 impressive your survived, might well have been the TPU 3D printed wing mount as have heard they are very good.
After watching this, I am more then pleased that I just was able to order a kronos v2 for $350 brand new and now I can throw a $150 in upgrades and still come out to about $500!
That's not a bad deal, love the deign and the handling of the Kronos, just shame the parts support sucks in the UK and they dont use better materials from the start, would be a killer car if they did
Corally do need to up their support for sure, even in the UK parts are a nightmare to get, im still waiting for 2 parts and this video was actually shot in April 🤷♂️🤷♂️
Well that was a great bash good driving by both the boys! I have to say I’m interested in the 2022 Corally Kronos xtr now after your video that truck not perfect but it took a lot in that video. And I prorbally won’t be as harsh on mine the biggest jumps I do is maybe 10 feet of air or less. No skate parks here to run or they are always too busy lol. I just run in the dirt, new development type areas for housing or buildings etc. 👋🇨🇦. Cheers great video!
Thanks for watching and commenting, Yes the cars did take some bad hits, think it runs better on 4s really, 6s seems to be just a bit to much for it. My biggest issue with Team Corally is the parts support, i would check what its like where you are located, as in the UK its not great, a lot of the parts you can only get direct from Team Corally at a cost of 19.99 Euro shipping, we havent been able to run this car since this video as have been waiting for the center cage to become available, almost 5 months later and its just come into stock but only at Team Corrally , so a 10 euro part would cost me 30 euro inc the shipping
@@HardcoreRC I think I’d have the same issue in Canada as the UK with parts support. That makes me think to get something else waiting for parts is the worst. I am eyeballing a new Outcast exb as they are on sale at Tower Hobbies website for a very good deal right now. And I just watched one of your Notorious videos again haha.
@@longboardguy If you like Stunt trucks then the Outcast EXB on the deal would be a far better buy than the Corally. You guys are so lucky to get thos cracking deals
Great video! They both did great honestly. But you do have more upgrades on the exb the xtr. All those M2C parts really help it stay together better so to me this still wasnt that fair of a comparison of the 2. But fun video!
Thanks, yes the Kraton does have more upgrades which is why I felt it only fair to go over what we had done to each car at the start. Whe sure had fun making this video and that's what really matters 👍👍
Love My Kraton So am Biased :P .. but Honestly think they both took an absolute beating pretty dam well So I'd call it a win for both.. .. well a win for anyone no matter which one they have.. not sure either of those cars are winning right now :P Another great video mate.
Indeed they both did very well, sadly still waiting on parts for the Kronos, Kraton was quite a quick fix and already had the parts. Thanks for watching and glad you enjoyed 👍👍
Great bash session! Both are clearly more durable than average. I'm guessing arrma might win between the two just because of aftermarket and LHS support
2000cst stock. try 3000cst. more important: go with thicker diff-fluid! stock is rear/center/front 10.000/100.000/10.000. try something like 30-100k front/rear and 200-500k center.
Not sure if your in the Uk or not, i lose track of everyone as im getting old and memory going 😂 www.modelsport.co.uk/product/core-rc-silicone-diff-oil-3000-cst-60ml--366821 or here: bit.ly/3H9OHzj
With a few tweaks taking away the weaker materials the XTR actually does good, that center brace still needs some work at the ends though, just too weak a connection for what it needs to do
Is that meant as a Joke ? some of the worse parts support in the UK i have seen, 2 month later and still waiting for parts to come in stock even at Team Corally themselves
Lets be honest, there was no thought to landing was there! It does flip very well though. Given the abuse I'd say they seem pretty equal right now. I'd give it to the EXB but that Kronos got spanked. Can we see the total cost to fix then and maybe the time spent?
Yeah not sure Jack really cared how it landed 🤷♂️🤷♂️ total repair cost was the Kraton £14 and had a spare RPM wing mount for that side already (handy) the Kronos was a wee bit more and still isnt fixed as some of the parts are still not available (battery tray and center body support) in addition most spares can only be purchased from Team Chorally and that then incurs a 20 euro postage fee, so for the shock shafts, front and rear brace supports that has cost £45 the other parts i need would cost £23
@@HardcoreRC I don't think you can blame that on corally, they have a distributor in the UK as you know and many parts are available. But if they don't do their job properly that isn't corallys fault
@@ThatSwedishGuy I think that can be blamed on Corally, one part hasn't been in stock for 2 months even on Corallys web site, the center tower body support. The UK distributor is CML and they are top notch, probably the best distributor in the UK. whilst some parts are available in the UK i have always had to order from TM direct with a 20 euro shipping cost as one or two required parts not in stock anywhere. I haven't been able to run the car since we shot this video back in April due not being able to get the center tower or battery tray even from TM directly, battery tray is now in stock but im not going to order that on its own for another 20 euro shipping cost and then the tower support when that finally comes in for another 20 euro postage fee. Sorry but part support outside Europe is shocking
Nice mess you made of that , Stanley 😂 Tough one to call really , the Corally took some really bad Landings, the Arrma took some too, but I think I’d call it a draw. Corally is more badly damaged but it took the worst beating . But Arrma didn’t come off unscathed so yeah 6 of one Half a dozen of the other if you Ask me . Good job on the Kronos upgrades , were they custom made
Omg sendage lol, what a awesome day out with the boys, the xtr faired up better than I thought it would, the exb is alway a king of bashing, my new max 6 combo will b here today so happy bashing for me come sat, oh question for u David what pinion did u run on ur 1650kv motor with stock spur? 💪👊😉🤙
I Don't Think People Can Slag Off The Corally XTR Anymore,🤔❓ If It Would Have Landed On Its Wheels Most Of The Damage Wouldn't Have Happened (No Disrespect To Your Lads, They Can Drive Well)👍
Yeah it did very well, one thing i would add is that if the landing that bent the front shock tower was on the Arrma the front diff case would have been toast, those Team Corally diffs cases are just a much better design than the Arrma ones. Jack was just out to totally abuse the XTR, poor car 😂
@@HardcoreRC agree 100% them Corally Diff cases are insanely tough! The bumpers really protect them as well.... Amazed the bent tower did not jank the bulkhead apart! I think because of all those locking nuts Corally uses 😍👍
@@3SonsRC Yeah the bulkhead is a far better design than Arrma, do like the locking screws / nuts. Said from the very start the XTR had some great design features but was just let down by the quality of some of the parts
@@HardcoreRC team corally usa has parts and also rc hobby explosion . ive gotten all my parts from them . speedtek also makes speed spools for the corally lineup
@@ronnielabbe2149 Depends what parts you break, the issue is its hit and miss if parts will be in stock in the UK or if i have to order from EU - so far any parts i have needed at least one part needed to come from the EU and that then adds $19 to the shipping cost. This part also isn't in stock in any county and hasnt been for as long as i know, and i need this part to run the car: corallyus.com/product/center-roll-cage-mount-chassis-tube-version-composite-1-set/
@@HardcoreRC are you in the usa or europe . i could get that part from rc hobby explosion in the us its in stock also look for the whole brace kit for 60 dollars
@@ronnielabbe2149 I'm in the UK, don't want all the tower to tower brace as have that already, its just the center tower body support, thanks for the offer but not paying $60 for a part that should only cost me $12 👍👍
Awesome video well done! Pure destruction! I'm not gonna lie that Corally surprised me it did take a few nasty hits... still the kraton exb remains king though!
Thanks, with a few tweaks taking away the weaker materials the XTR actually does good, doesnt jump as high and still some areas that need help, but yep it did good
Love the videos me and my dad have got loads and go out this Saturday I’m going out this Saturday on the 1/8 bangers and doing caravan racing it’s at Hastings fresh fields and I’ve got a meeting next week on Saturday the postcode for the track is TN388AJ 👍👍
I'm impressed with both trucks. The kids launched them, ordered a burger and fries, ate, then landed. Seriously, the kids have enough flight time to have earned their pilots licenses. Great Video.
LOL, that really made me laugh 😂😂 thank you for watching and putting sucks great comment
I'm quite shocked. That Corally took a proper beating. It just shows you that made of the correct materials it has real potential...
Jack did abuse it for sure 😂😂 said when we got it it had some great designs, but weak materials let it down, take them away and its far better, the tower to tower brace still needs some work at the ends though
Hello can you help me please I have the Dbxl clean 2.0 gas buggy and I need shock oil and I don’t know what weight or what kind to go because I never bought shock oil befor like what kind and weight do you recommend? I don’t really race it,, Thanks. Mark
The manual will tell you what weight to use page 26 www.horizonhobby.com/on/demandware.static/-/Sites-horizon-master/default/dwad0f3a0d/Manuals/LOS05020-Manual-EN.pdf then you can choose any make you want for the silicon oil
@@HardcoreRC ok thanks hardcoreRc thanks so much for your help.
That was one hell of a bash session no doubt!!!! Both really held up well but I’ve got to give it to the team corally seeing that it doesn’t have nearly the amount of upgrades that the Arrma has and took way more abuse … Dave you really stepped up your bash game with that one ☝️ well done Calen and Jack that was freaking awesome 🤩 🔥💯💯
Many thanks, glad you enjoyed it and we had a lot of fun making it, the XTR did do very well especially with Jacks roof landings, poor car
Hard to say on this one.... The Corally got absolutely destroyed in those landings but the towers bending was to be expected with 3x lending on the roof flat from that height. If they both took the same hits then you could judge.... But honestly they both did quite well considering.
To be fair the Corally held up well to that and performance wise was neck and neck with the EXB ignoring the slight height gain because assumed more weight of the rig. Both outstanding rigs and maybe your biased against the Corally is starting to fade 😂 calling it the weakest RC in the beginning 🤣😂 Yeah if your launching it into the trees 🤣😅😍😍😍 love ya.... Poke😚😂😂
Them steering rods and Turnbuckles needed to go on the Corally as I mentioned.... Thats small easy fix.... And nice one on the shock Standoffs 👍.... Your boys were doing great besides the few launches they either didn't care or lost track of the rig spinning so much which is understandable 👍
Calling it the weakest is a bit of a joke, just adds to the fun really 😂 although up until this point it hadn't faired well considering being marketed as an Extreme Basher, but did say when we first got it that is had some great designs and look promising, yet it was let down by lower quality materials, we have now replaced most of these and it does hold up really well.
Have to say that i think if the Kraton had landed like that to bend the front shock tower the front bulkhead would have been toast, super impressed with the bulkhead holding up like that and the way it has crews with nuts on the end to hold it all in place 👍👍
Tower to Tower Brace still needs some work though, we have beefed it up but it still needs better and stronger attachment points at the ends.
TM also really need to sort out their parts support, still waiting on parts to come in stock 2 months later as this video was actually shot in April and still not got the parts to fix it all 😥
To be honest i think Jack was just on a mission and partly he lost count of the flips as well 😂😂
Great video guys definitely beat the snot out of both of them but I would definitely say the EXB came home with the least drain on the wallet lol
Thanks dude, yes the EXB was a lot less of a drain on the wallet, still waiting on parts for the Kronos sadly. Had a fun day out and that's what counts.
Man, with that abuse, I just can't believe that these rigs wouldn't explode into a million pieces. I treat my rigs better now after watching crazy videos like these. Too expensive to keep up with giant jumps that go wrong. I do them less and less. Thanks for the carnage! 😂👍
Its fun to do every now and again, not something we do every weekend though, in fact have really had a car to proper fix in a long time, thanks for watching 👍
Jack & Callum aka The Wrecking Crew!
Great video.
Jack was on a mission for sure 😂😂
Hi can I aske what camera you had on the car to get those shots and how it was mounted. Great video
Its an Insta 360 Go2
I landed my kraton exb like kev did on his talion exb. Mine had a metal gearbox stock exb chassis but with a TPU 3D printed wing mount. Damage report broke the chassi brace bolt. Chassi slightly tweaked but i think it was already like that. The wing mount i believe saved it. It didnt even receive a scratch
Those sorts of landings are brutal, i was there when Kev did his, or should i say Martyn did it 😂😂 impressive your survived, might well have been the TPU 3D printed wing mount as have heard they are very good.
BRUTAL!!! Great Video!
Thanks, glad you enjoyed and thank you for watching 👍👍
Good video guys 👍
Thanks 👍
After watching this, I am more then pleased that I just was able to order a kronos v2 for $350 brand new and now I can throw a $150 in upgrades and still come out to about $500!
That's not a bad deal, love the deign and the handling of the Kronos, just shame the parts support sucks in the UK and they dont use better materials from the start, would be a killer car if they did
Nice little vidja to watch while I wait for a battery to charge.
Gotta take the dog for a run. She's getting crazed with energy. Lol.
Thank you, hope you managed to get out and play and also take the dog for her run 👍👍
Wicked bash sesh! Wishing Corally was better supported in Canada, would be an easy decision 👍
Corally do need to up their support for sure, even in the UK parts are a nightmare to get, im still waiting for 2 parts and this video was actually shot in April 🤷♂️🤷♂️
@@HardcoreRC 😳 Eeep
yeah, that's a good one. propper jumps hard landings. funny vid and corally suprised a bit. good work guys 👍
Thanks, glad you enjoyed and the Corally surprised us as well 👍👍
Nice video. Loved it!!!!!
Thanks, glad you enjoyed and that's for watching 👍👍
Love it. Those jumps at the skate park are insane
Thanks - that ramp with run up does make for some great jumps 👍👍
@@HardcoreRC Hell yeah. I need to get a ramp I can fit in my car so I can jump by Arrma Big Rock
Nice this truck love this spot...we need similar 😉 great video
Thanks, it is a great skate park, get some proper sends 😂😂
Both rigs have appropriate damages, nothing too crazy. Awesome bashing as always 👍👍👍
Thanks Kimberly 👍👍
What's the other car on the track?
Kraton with a different body shell
Lots of fun! Both tough little animals.
Yes they are both tough and great fun to jump and drive 👍👍
Well that was a great bash good driving by both the boys! I have to say I’m interested in the 2022 Corally Kronos xtr now after your video that truck not perfect but it took a lot in that video. And I prorbally won’t be as harsh on mine the biggest jumps I do is maybe 10 feet of air or less. No skate parks here to run or they are always too busy lol. I just run in the dirt, new development type areas for housing or buildings etc. 👋🇨🇦. Cheers great video!
Thanks for watching and commenting, Yes the cars did take some bad hits, think it runs better on 4s really, 6s seems to be just a bit to much for it. My biggest issue with Team Corally is the parts support, i would check what its like where you are located, as in the UK its not great, a lot of the parts you can only get direct from Team Corally at a cost of 19.99 Euro shipping, we havent been able to run this car since this video as have been waiting for the center cage to become available, almost 5 months later and its just come into stock but only at Team Corrally , so a 10 euro part would cost me 30 euro inc the shipping
@@HardcoreRC I think I’d have the same issue in Canada as the UK with parts support. That makes me think to get something else waiting for parts is the worst. I am eyeballing a new Outcast exb as they are on sale at Tower Hobbies website for a very good deal right now. And I just watched one of your Notorious videos again haha.
@@longboardguy If you like Stunt trucks then the Outcast EXB on the deal would be a far better buy than the Corally. You guys are so lucky to get thos cracking deals
Both cars were impressive for me. Xtr done well comparing to the exb that was heavily modified
Yes the XTR did do well, especially considering those brutal roof landings
Corally took it 🙌🙌
Great video! They both did great honestly. But you do have more upgrades on the exb the xtr. All those M2C parts really help it stay together better so to me this still wasnt that fair of a comparison of the 2. But fun video!
Thanks, yes the Kraton does have more upgrades which is why I felt it only fair to go over what we had done to each car at the start. Whe sure had fun making this video and that's what really matters 👍👍
Awesome vid 🔥👍✌️
Thanks ✌
Kraton is still the king of the sky !
Great vid guys 👍
Indeed the EXB is deffo still King of the sky 👍
Love My Kraton So am Biased :P .. but Honestly think they both took an absolute beating pretty dam well So I'd call it a win for both.. .. well a win for anyone no matter which one they have.. not sure either of those cars are winning right now :P Another great video mate.
Indeed they both did very well, sadly still waiting on parts for the Kronos, Kraton was quite a quick fix and already had the parts. Thanks for watching and glad you enjoyed 👍👍
Great bash session! Both are clearly more durable than average. I'm guessing arrma might win between the two just because of aftermarket and LHS support
As you say they both held up very well, but Arrma does have far better parts support, still waiting on parts for the Kronos 2 months later
Hi does any one no wot shock oil goes in the infraction 6S V2 ???? Or wots the best stuff to put in them ???
2000cst stock. try 3000cst. more important: go with thicker diff-fluid! stock is rear/center/front 10.000/100.000/10.000. try something like 30-100k front/rear and 200-500k center.
Hi mate do u no where I can get some 3000cst ???
Not sure if your in the Uk or not, i lose track of everyone as im getting old and memory going 😂 www.modelsport.co.uk/product/core-rc-silicone-diff-oil-3000-cst-60ml--366821 or here: bit.ly/3H9OHzj
I'm in Scotland dave yeah had a look on wheelspin and modelsport got some order now thanks to use all for helping cheers boys 👍👍💪💯😁
Okay. I'll give it to the Corally, after some proper brace upgrades, it seems to be Arrma- tough.....
But still in need of much.
With a few tweaks taking away the weaker materials the XTR actually does good, that center brace still needs some work at the ends though, just too weak a connection for what it needs to do
corally's support is definitely best. ;)
Is that meant as a Joke ? some of the worse parts support in the UK i have seen, 2 month later and still waiting for parts to come in stock even at Team Corally themselves
@@HardcoreRC in Europe (Netherlands ) the support is really good, no joke. They send me a new esc and motor after 1.5 years, still warranty. 😍.
@@worrel82 Yeah in the EU its good, rest of the world it sucks big time 😂😂
Lets be honest, there was no thought to landing was there! It does flip very well though. Given the abuse I'd say they seem pretty equal right now. I'd give it to the EXB but that Kronos got spanked. Can we see the total cost to fix then and maybe the time spent?
Yeah not sure Jack really cared how it landed 🤷♂️🤷♂️ total repair cost was the Kraton £14 and had a spare RPM wing mount for that side already (handy) the Kronos was a wee bit more and still isnt fixed as some of the parts are still not available (battery tray and center body support) in addition most spares can only be purchased from Team Chorally and that then incurs a 20 euro postage fee, so for the shock shafts, front and rear brace supports that has cost £45 the other parts i need would cost £23
@@HardcoreRC I don't think you can blame that on corally, they have a distributor in the UK as you know and many parts are available. But if they don't do their job properly that isn't corallys fault
@@ThatSwedishGuy I think that can be blamed on Corally, one part hasn't been in stock for 2 months even on Corallys web site, the center tower body support.
The UK distributor is CML and they are top notch, probably the best distributor in the UK. whilst some parts are available in the UK i have always had to order from TM direct with a 20 euro shipping cost as one or two required parts not in stock anywhere. I haven't been able to run the car since we shot this video back in April due not being able to get the center tower or battery tray even from TM directly, battery tray is now in stock but im not going to order that on its own for another 20 euro shipping cost and then the tower support when that finally comes in for another 20 euro postage fee.
Sorry but part support outside Europe is shocking
Nice mess you made of that , Stanley 😂
Tough one to call really , the Corally took some really bad Landings, the Arrma took some too, but I think I’d call it a draw.
Corally is more badly damaged but it took the worst beating . But Arrma didn’t come off unscathed so yeah 6 of one Half a dozen of the other if you Ask me .
Good job on the Kronos upgrades , were they custom made
LOL, that's a blast from the past Stanley 😂😂 deffo 6 or 1 and half dozen of the other - was a good day out though 👍👍
@@HardcoreRC
Yes enjoyed watching , cringed a few times on the Corally Landings . Your upgrades held pretty well all things considered
Omg sendage lol, what a awesome day out with the boys, the xtr faired up better than I thought it would, the exb is alway a king of bashing, my new max 6 combo will b here today so happy bashing for me come sat, oh question for u David what pinion did u run on ur 1650kv motor with stock spur? 💪👊😉🤙
Thanks and gld you new Max6 is arriving, i would suggest a 19t pinion on the 1650kv with stock spur
@@HardcoreRC thanks buddy ill have to order one, I've got a 14, 16 and 21 at the min lol
I Don't Think People Can Slag Off The Corally XTR Anymore,🤔❓ If It Would Have Landed On Its Wheels Most Of The Damage Wouldn't Have Happened (No Disrespect To Your Lads, They Can Drive Well)👍
Yeah it did very well, one thing i would add is that if the landing that bent the front shock tower was on the Arrma the front diff case would have been toast, those Team Corally diffs cases are just a much better design than the Arrma ones. Jack was just out to totally abuse the XTR, poor car 😂
@@HardcoreRC agree 100% them Corally Diff cases are insanely tough! The bumpers really protect them as well.... Amazed the bent tower did not jank the bulkhead apart! I think because of all those locking nuts Corally uses 😍👍
@@3SonsRC Yeah the bulkhead is a far better design than Arrma, do like the locking screws / nuts.
Said from the very start the XTR had some great design features but was just let down by the quality of some of the parts
The Corally looks a little down in the mouth. 🤣👍
Bent shocks after the bash session 😂😂
Epiccccc
Thanks - and you were first 😂😂
That’s a tough one to call I think, the xtr had the worst amount of landings.
Still think the exb has the edge though 👍🏻
Yeah the XTR had the tougher time, the EXB still gets our vote though
i love my kronos its been beat to shit and it goes like hell
Its defintaly showing potential, just a shame about the parts support, 2 months and still waiting on parts so i can run it again
@@HardcoreRC team corally usa has parts and also rc hobby explosion . ive gotten all my parts from them . speedtek also makes speed spools for the corally lineup
@@ronnielabbe2149 Depends what parts you break, the issue is its hit and miss if parts will be in stock in the UK or if i have to order from EU - so far any parts i have needed at least one part needed to come from the EU and that then adds $19 to the shipping cost. This part also isn't in stock in any county and hasnt been for as long as i know, and i need this part to run the car: corallyus.com/product/center-roll-cage-mount-chassis-tube-version-composite-1-set/
@@HardcoreRC are you in the usa or europe . i could get that part from rc hobby explosion in the us its in stock
also look for the whole brace kit for 60 dollars
@@ronnielabbe2149 I'm in the UK, don't want all the tower to tower brace as have that already, its just the center tower body support, thanks for the offer but not paying $60 for a part that should only cost me $12 👍👍
Bendy Wendy you say? Ive heard about her...
Hehe, we all like Bendy Wendy, her sister Juicy Lucy is quite nice as well 😂 although not sure about dirty Gertie 😂
Awesome video well done! Pure destruction! I'm not gonna lie that Corally surprised me it did take a few nasty hits... still the kraton exb remains king though!
Thanks, with a few tweaks taking away the weaker materials the XTR actually does good, doesnt jump as high and still some areas that need help, but yep it did good
Kraton❤️
How doesn't love the Kraton 👍👍
I counted 8
That's a lot of backflips
Draw.
Goo call 👍👍
Love the videos me and my dad have got loads and go out this Saturday I’m going out this Saturday on the 1/8 bangers and doing caravan racing it’s at Hastings fresh fields and I’ve got a meeting next week on Saturday the postcode for the track is TN388AJ 👍👍
Do need to see if i can get down the Fresh Fields, although Saturday is when i tend to do my filming wrenching
@@HardcoreRC are ok they only do Saturday but there really good fun to watch and race defo need to come to it 👍👍