This is the best Auto Log Cutter I've ever found. After building it worked perfectly the first time and I haven't found any problems yet. I would defiantly recommend building it if you are having any doubts. This is cheaper than buying the bigger sawmill, Allows for more space in your vehicle, and has an overall nice design. Thanks, Aqua
The way you esplain how it works, détails, how it is possible to personalize the machinery, dude you need a lot more credit for what you do. Thanks for the time and attention you put in these vidéos. You even draw useful schematics, speak clearly, even young players can recreat your stuff. Thanks again, genuis ;). P.s. lot of comments about this, but your voice got nice, brings me peace.
heres a tip for combining it with a sawmill: If you're in some kind of situation where you need the planks to be funneled to the other side, dont place the sawmill in front of the cutter. Instead, place the sawmill under the conveyors leading it up to the cutter and reverse the conveyor receiving the cut wood. Then just connect both with some conveyors.
For me, the wood doesn't slide down the conveyer, but it presses the pressure plate. It just stays there. I've checked the direction and it goes the right way but it still won't work. Help?
My advice is to: Put the machine through a stress test, testing big and small logs, long and short as well as giving it an overwhelming amount of logs to test if its capable of organizing them, then rebuild it
you made an awsome video and im sure gonna use this in lumber tycoon for my own game save, gona take some time but it wil be worth it. have a nice day and stay awsome!!
It works really well, but it requires manual help, because the cut pieces get stuck and won't fall, it needs to be pulled to be unstuck(not a big problem since its easy to pull it) and for some odd reason, there is that one lava log piece that won't fit, not even in the largest sawmill : |
i have 1 problem that I need help with. The last slanted piece is where all my wood gets stuck and the conveyor is lined up perfectly. I don't know what to do
For anyone here having problems with wood falling down after being cut I just found a simple solution: Try moving the pressure plate away like half a width of a wire, but make sure it still activates the system, if you do it correctly the logs will fall down as they should.
it’s normal for that to happen occasionally. if it is happening very often, it’s possible you’ve built it wrong. First, make sure the funnel conveyor is toggled downward second, make sure the pressure plate isn’t placed wrong, it could potentially be slightly in front of the funnel conveyor (the funnel conveyor is what sucks the wood down) so make sure that the funnel conveyor is actually making contact with the loose plank. third, if that doesn’t work, try moving the funnel conveyor, pressure plate, signal sustain, and wires up ONE unit. you may need to move the chop saws out of the way temporarily, but keep them where they are (don’t move them up one stud) after moving just the funnel conveyor and pressure plate before placing everything back, verify that a plank running through the system will actually activate the pressure plate. if it doesn’t, maybe try moving it down two tiles by placing three tiles against the bottom of the funnel conveyor and destroying two, then placing the conveyor on top and then building the rest from there Hopefully that’s not too complicated or hard to follow!
Hello, just found this video and it going to be my next projects. Keep up the work man, killing it. Question, For the teal wood next to the glass in the video, what kind of wood is that. Have a nice day
Thanks for the tutorial:D, really helps me alot especially when cutting woods and placing them as they always cant come out as planks especially Fir wood. Great tutorial for those who are lazy to cut big woods xD
thank you for showing me this i had my own but it was terrible with jams and looked ugly so i wanted to spice things up when i saw your video it was better than mine so i had to get yours
now this is alot useful if want to save time cutting your log and alot more useful the 1×1 unit cutter becuase most of the poeple doesn't have this super blueprint gamepass
I will make this 3 days later cuz I ain’t go no internet in my pc + I can’t play roblox in my phone bc I only have 2 bars and the signal is trash bc I moved houses
two reasons: good computer and empty server if you struggle a lot here’s an outdated video i made years ago that could help ua-cam.com/video/aXac4oNccjM/v-deo.html
Works decent but doing it by hand is probably better as you dont have to deal with clogs and overwhelming the system with logs (Its supposed to be able to handle an auto unloader so this is quite concerning) it also likes to pin the already cut logs to the pressure plate so it gets stuck and itll sometimes let to big pieces fall in and that fucks up the mills work so i have to deal with 2 clogs
i can't place the thin wall on the right, left works fine, i've done it 3 times already over and over, rebuilded the entire thing, but the right doesn't work for some reason
@@XmonkeyXnutsX I solved it by replacing the pressure plate with another straight conveyor and then I added a laser where the logs come in when the log is too long it will get stuck and will be cut after the log will fall down the laser will get triggered with every log I know that’s something I couldn’t solve but now it does work with me, and I meant higher, if you want to see mine you should join me sometime
This is the best Auto Log Cutter I've ever found. After building it worked perfectly the first time and I haven't found any problems yet. I would defiantly recommend building it if you are having any doubts. This is cheaper than buying the bigger sawmill, Allows for more space in your vehicle, and has an overall nice design. Thanks, Aqua
TRuE
I recently found your channel, and your sounds, edits everything is perfect, this makes me want to play Lumber Tycoon again
Ty
@@inigogaming3789 uh..
I am.. it’s still getting updates to this day
Play it
The way you esplain how it works, détails, how it is possible to personalize the machinery, dude you need a lot more credit for what you do. Thanks for the time and attention you put in these vidéos.
You even draw useful schematics, speak clearly, even young players can recreat your stuff. Thanks again, genuis ;).
P.s. lot of comments about this, but your voice got nice, brings me peace.
Hi
Explain* (not to bully you just saying)
@@wendyydnew6804english might no have been his first language
@@wendyydnew6804 you forgot the comma after "you"
heres a tip for combining it with a sawmill:
If you're in some kind of situation where you need the planks to be funneled to the other side, dont place the sawmill in front of the cutter. Instead, place the sawmill under the conveyors leading it up to the cutter and reverse the conveyor receiving the cut wood. Then just connect both with some conveyors.
Thanks dude this actually helped me a lot.
Wow I didn’t think of this, found a new project that seems worth my time
went from the Auto Unloader video to this, and dayum, puberty has hit you like a train through these past 2 years lol.
Haha
When you will make auto tree cutter and auto seller lol
+1
@Linus Tech Tips no shitttt
Maybe door bridge to the wood drop off
I figured a trick out, use the ice trees, and get the hauler truck back it up to the dropoff and lower the tailgate and some slips in the dropoff
Any truck with a tailgate backwards at sell point auto sells wood
Yes Finaly You’re back!
You’re back!
Hey! Did you think to create a video other than lumber tycoon?
You should show us how you made that wood sorter. It looks awesome!!!
Bro i saw the auto unloader video a minute ago and your voice changed soooo much
I love you. I need more builds
For me, the wood doesn't slide down the conveyer, but it presses the pressure plate. It just stays there. I've checked the direction and it goes the right way but it still won't work. Help?
I am looking for an answer to the same question. I can't seem to find a solution.
Maybe u forgot to toggle the direction?
@@xsnox7No, Its the same. It just presses on the pressure plate
this helped me so much thanks man!!!!
oh wow very cool! this’ll be very helpful 😊
bro your a god I'm a UA-cam learner right now and the way you explain it is so genius thank you man.
this guy should got 50K subs man
really helpfull thank you
after the chop saw cut the wood ,the wood doesnt fall in the hole
My advice is to: Put the machine through a stress test, testing big and small logs, long and short as well as giving it an overwhelming amount of logs to test if its capable of organizing them, then rebuild it
also basic wood cuz saws may cut them too fast making alot of small pieces which can be fixed with alot, alot of logic which i won't explain
Aqua Flow you are the best chanel tutorial for roblox lumber tycoon Thank you so much Aqua Flow
why do you have 16k subscribers i couldve swore you had like 100k- you deserve 100k either way
bro i completely forgot about ur channel lol, its been like 9 months 😂
I will definitely going to copy this setup soon,thanks for the tutorial man
Did it work
@@JhayzenFails yeah man it works I already copied this setup a day ago and it work smoothly
This is what I do need but I haven't been playing lt2 or Roblox for a while
I saw ur vid u posted 2 years ago and dam u had a glow up
you made an awsome video and im sure gonna use this in lumber tycoon for my own game save,
gona take some time but it wil be worth it.
have a nice day and stay awsome!!
when i place logs they hit the detector, get cut but don’t fall they just stay there.
Connect a wire from the pressure plate to a delay box then connect the wire to the “toggle direction” switch on the last conveyor and problem solved
i got a lil problem it wont go down actually after the cut
same
It works really well, but it requires manual help, because the cut pieces get stuck and won't fall, it needs to be pulled to be unstuck(not a big problem since its easy to pull it) and for some odd reason, there is that one lava log piece that won't fit, not even in the largest sawmill : |
I have this same issue, it's very annoying
Connect a wire from the pressure plate to a delay box then connect the wire to the “toggle direction” switch on the last conveyor and problem solved
@@user-hl9gd2hg2jwdym by the last conveyor
thank you so much for this. keep going like this your channel will grow big.
i have 1 problem that I need help with. The last slanted piece is where all my wood gets stuck and the conveyor is lined up perfectly. I don't know what to do
@@EmmettYsv maybe you’ve switched it to the wrong direction?
@@Aptyn no i checked, idk whats goin on
For anyone here having problems with wood falling down after being cut I just found a simple solution:
Try moving the pressure plate away like half a width of a wire, but make sure it still activates the system, if you do it correctly the logs will fall down as they should.
How do I move it back half the width of a wire
@@moomoo8275 just place a wire on behind it then place another wire on it so that it is half out then finally place a tile and a plate on it
I just realized while trying to recreate this that it would be 500% easier to just use lasers, even if they aren't the cheapest solution.
@@PiterparkerYT thanks
@@PiterparkerYT how do you use the lasers
Nice video bro!!
The wood gets clogged between the pressure plate, do you have any solutions?
it’s normal for that to happen occasionally. if it is happening very often, it’s possible you’ve built it wrong.
First, make sure the funnel conveyor is toggled downward
second, make sure the pressure plate isn’t placed wrong, it could potentially be slightly in front of the funnel conveyor (the funnel conveyor is what sucks the wood down) so make sure that the funnel conveyor is actually making contact with the loose plank.
third, if that doesn’t work, try moving the funnel conveyor, pressure plate, signal sustain, and wires up ONE unit. you may need to move the chop saws out of the way temporarily, but keep them where they are (don’t move them up one stud)
after moving just the funnel conveyor and pressure plate before placing everything back, verify that a plank running through the system will actually activate the pressure plate. if it doesn’t, maybe try moving it down two tiles by placing three tiles against the bottom of the funnel conveyor and destroying two, then placing the conveyor on top and then building the rest from there
Hopefully that’s not too complicated or hard to follow!
:O AQUA UPLOADING A VID WHAT IS THIS
It doesn't work for me, when you touch the pressure plate it keeps the signal and doesn't turn on the saws
Hey Big thanks man your channel is an inspiration to my channel ive started out streaming lumber and making videos so big thanks
Hello, just found this video and it going to be my next projects. Keep up the work man, killing it. Question, For the teal wood next to the glass in the video, what kind of wood is that. Have a nice day
Ice wood
Mine doesn’t work wood logs get stuck going half down and then not hitting the pressure plate what I do? 😢
I'll definitely try this once i get a PC! If only mobile building is less glitchy or inaccurate
LOL the first minute sounds like a tv ad
I remember this guys voice 3 years ago. Sounds way different
finnaly I've finished it
it works super good
thanks
Thanks for the tutorial:D, really helps me alot especially when cutting woods and placing them as they always cant come out as planks especially Fir wood. Great tutorial for those who are lazy to cut big woods xD
Bye I like your videos keep the work up👍🏼
Will there be more woodlands videos?
thank you for showing me this i had my own but it was terrible with jams and looked ugly so i wanted to spice things up when i saw your video it was better than mine so i had to get yours
0/10. I used it to cut my wood and it cut it off.
Dum it's littelary cutter 💀
@@WinningSon_Ytnever heard of a joke, bud?
“ARE YOU SERIOUS RIGHT NEOW BRUH?”💀👍
@Khemariii hey, welcome to the internet. Basically it's kinda like your dad, where u kinda have to laugh/dontgiveadamn about jokes made by people.
@Khemariiihumor is subjective this is the dumbest thing i ever see ppl say, just cause u dont find it funny dont mean it wasnt a joke lil dude💀
Hello! does it need to be ice wedges? or i can do wood? Nice video btw
it doesn’t have to be ice wood, the only reason I used ice wood is because wood slides better due to its slippery property
@@Aptyn Thanks! It worked really well with ice ❄
now this is alot useful if want to save time cutting your log and alot more useful the 1×1 unit cutter becuase most of the poeple doesn't have this super blueprint gamepass
i love it, perfection
thanks a lot for this video i have been waiting
why does the wood do not get down after being cut
Idk nut it happens to me just grab it then release it will fall
This Is Cool I'm A New Subscriber
This guy finish it only 10 minutes
Me playing on cp with 4000 ping and finish it in 1 hour: im a pro builder now
The wood planks wont get pushed by the funnel conveyor. They stay at the saw spot without helping, any solution?
do the wedges on the bottom have to be ice?
I have a question for you,
what is your main goal in lt2
Your voice 2 years ago was so different
Thanks for this Amazing video
you should make a video showing the best way to trade and how to avoid being scammed for the newer players of LT2 it can be useful for them
They're many vids about this and his upload schedule is pretty bad
I finally got all the item thank you
i vary love it. THIS IS VEDIO I WANT TO SEE
1000/1000%
is it important that it is ice wood or can it be other wood
umm are the mecine is still work if the sawmill in the back of the cutter?
Does signal sustain stops the power?
bro your voice has changed so much... anyways best of luck for future videos
I will make this 3 days later cuz I ain’t go no internet in my pc + I can’t play roblox in my phone bc I only have 2 bars and the signal is trash bc I moved houses
this guy is so genius!
how do you place the conveyors so perfectly? i literally suffer trying to do it
two reasons: good computer and empty server
if you struggle a lot here’s an outdated video i made years ago that could help ua-cam.com/video/aXac4oNccjM/v-deo.html
Does it really need to be an ice wood
do i need to fill thos wedges whit ice wood
not necessarily it just makes it less likely your pieces will get stuck
@@Aptyn ok thanks
I wish lumber tycoon had a creativ mode eher blue prints fill them selves
You should show us how you made that wood sorter. It looks awesome!!!
ngl
I'm facing a problem when I place the pressure plate it stays on for ever without deactivating
Hi nice video, i have a problem logs stays bug
How do I fix it where the wood is getting clogged between the sawmill
Might use this to cut wood shorter before putting in storage
Your voice is way different compared to 2 years ago
ty bro
how the heck did you rotate the saw and plate without it glitching out
Works decent but doing it by hand is probably better as you dont have to deal with clogs and overwhelming the system with logs (Its supposed to be able to handle an auto unloader so this is quite concerning) it also likes to pin the already cut logs to the pressure plate so it gets stuck and itll sometimes let to big pieces fall in and that fucks up the mills work so i have to deal with 2 clogs
The sawmills keep turning my wood into rly tiny pieces just shreds thro it how I stop that ?
i can't place the thin wall on the right, left works fine, i've done it 3 times already over and over, rebuilded the entire thing, but the right doesn't work for some reason
Nice video. Thank you. Anyway i have problem with setup chopsaw and place them.
very helpful, thanks g
when i try to use a pressure plate it doesn’t work unless it’s on the ground and idk what to do about it
I had a problem with the pressure plate so i swaped it out with a lazer and it works
Hey think you could give an explanation about the laser mechanism im not sure how to set it up.
Please, please teach us how to do the sorter that you show in the beginning of the video (0:50)
works great but sometimes the cut logs dont fall to the lower conveyor and it gets stuck. u got a solution for that?
make sure your funnel conveyor is toggled down
@@Aptyn it is and it still gets stuck now i have to drag them down to not cause the rest to get stuck
I solved it I put the funnel conveyor hifher
@@NiCk-zd2fs how do you stop the logs from getting stuck and what does hifher mean
@@XmonkeyXnutsX I solved it by replacing the pressure plate with another straight conveyor and then I added a laser where the logs come in when the log is too long it will get stuck and will be cut after the log will fall down the laser will get triggered with every log I know that’s something I couldn’t solve but now it does work with me, and I meant higher, if you want to see mine you should join me sometime
The hardest part is. putting the glass pane into the under of the conveyor
yes 😂
Iv spent hours on thins thing trying every single way possible but the wood always gets stuck after cutting I'm starting to get pissed
can the ramps be shortened?
Thx❤
Plz help my wood doesn’t get cut by the saws
For some reason the log remains stuck after cutting, any way to fix?
Connect a wire from the pressure plate to a delay box then connect the wire to the “toggle direction” switch on the last conveyor and problem solved
His voice changed so much
Nice video