Centrifugal Pump Components Explained
Вставка
- Опубліковано 28 чер 2024
- Want to continue learning about engineering with videos like this one? Then visit:
courses.savree.com/
Want to teach/instruct with the 3D models shown in this video? Then visit:
savree.com/en
******************************************************************
This 3D animated video shows how a centrifugal pump works. We look at all of the centrifugal pump’s main components and briefly discuss how it works. The volute casing, diffuser, impeller, wear rings, compression packing, shaft and bearings are all discussed in the video.
Like this video? Then check out our other videos!
🚢 Marine Diesel Two Stroke Engine - How it Works! - • Marine Diesel Two Stro...
🚢 Ship Parts and Terminology Explained! - • Ship Parts and Termino...
⚙️How Deaerators Work! - • How Deaerators Work (E...
⚙️How Shell and Tube Heat Exchangers Work! - • How Shell and Tube Hea...
⚙️How Power Grids Work! - • The Electrical Grid an...
⚙️How Watertube Boilers Work! - • The Electrical Grid an...
⚙️How Dams Work (Hydro Dams)! - • How Dams Work (Hydro D...
💡Control Valve Types (Gate Valve, Globe Valve etc.)! - • How Shell and Tube Hea...
💡Transformer Parts and Functions! - • Transformer Parts and ...
💡Plate Heat Exchangers Explained! - • Video
📚Want to learn more about engineering?
Then join saVRee to access over 45 hours of engineering video courses! New courses every month!
courses.savree.com/
Hope to see you on a course soon! 👋
🏫Want to use the 3D model in this video to present, instruct, or teach? Simply join saVRee! We have over 400 engineering models that will make your life a lot easier!
savree.com/
📱Check out our socials!
linktr.ee/savree
📖You can learn more about engineering in our technical encyclopedia: savree.com/en/encyclopedia
▶️Introduction
Centrifugal pumps consist of a stationary casing (volute or diffuser), impeller, wear rings, shaft, compression packing and bearings. Modern pumps often employ a mechanical seal instead of packing. All these pump components are discussed in the video and discussed in greater depth in the associated video course.
Operation
Liquid is drawn into the impeller and flows outwards away from the impeller eye. The change in cross sectional area of the impeller vanes and volute casing causes the velocity energy to be changed to pressure energy (Bernoulli’s principle).
#saVRee #Pump #IndustrialEngineering
Want to continue learning about engineering with videos like this one? Then visit:
courses.savree.com/
Want to teach/instruct with the 3D models shown in this video? Then visit:
savree.com/en
you probably dont care at all but does someone know a trick to get back into an Instagram account?
I stupidly lost my login password. I love any tricks you can give me!
@Rafael Vincent Instablaster :)
@Matias Carmelo Thanks for your reply. I found the site on google and I'm waiting for the hacking stuff atm.
Takes quite some time so I will get back to you later with my results.
@Matias Carmelo It worked and I finally got access to my account again. I'm so happy!
Thanks so much, you saved my ass !
@Rafael Vincent You are welcome :D
There cannot be a better explanation then this...really thankful to you sir
One of the best explanatory videos I have seen on centrifugal pumps.
Thanks bro, you summarized a textbook
Great video, love the clear animation showing the inside components of the pump.
Many thanks sir for your down to earth exploration on the CENTRIFUGAL PUMP.
Kudos to you
Very informative, and easy to understand. Thank you!
Incredible video a lot of information... Thank you so much
It's amazing. Thank you so much !
I just want to say thank you for such a wondaful and informative videos you made.
The zoom in is so good
Man! This is so informative. Thank You Sir!
very helpful taking my grade 2 treatment test and this helps a lot
Thank you! This is the best video I even watched regarding the pumps. I would have included an extra minute for explaining the Shaft key as well, but still it's really impressive how well you could explain this.
Thank you
Excellent video. Thank you for your time.
Mind blowing...exceptional video
Love your animation sir..This is a great education.
I am from Chemical Engineering background, really loved your videos.
"I hope you can make a 3D animation video on DISTILLATION COLUMNS and Double Pipe Heat Exchanger"
thank you so much for this super explanation
Excelent detailed presentation!
Wonderful explanation. Thanks a lot.
I work as a water pump operator. This video has helped me understand why Patterson pump 1 is leaking and name of the parts. Thank you.
Nicely explained, various parts of centrifugal pump by animated model. It will be quite helpful for operation and maintenance personnel. Thank you for knowledge sharing.
Great video. Well done.
Very informative, thank you 😇
Very helpful. Thanks a lot
very well explained. Thanks
great video, thank you
Excellent video!
You made it easier for me. thanks alot
You are the best, kindly consider the types of mechanical seal in your next videos
Appreciate this information. Thanks..
perfect explanation thank you.
Thanks a lot its really helpfully
Thank bro am from India... and understood better with ur efforts put over developing 3D animation in such complicated equipments.
Keep doing more more and more.
Thank U a lot.... 🙏
Very nicely explained it was very useful for me
I love this!!! Gland nut was not discussed though.
Awesome video brother
Simply amzing
Grt tnx for this clear explanation.......
Very good explanation sir. thank you
Best video on the subject ....
Nice.
Thanks very much for video. 😍
very clear and easy explanation
Glad you think so!
Hey bro you are doing very well keep it 💯👍👌 your explanation practical based so I like it
Thank you so much.
Best explanation ever
Nice animation
yes, now explain that sealing arrangement please!
Thank you very much!
You're welcome!
thank you very much.
So informative
Hi, I m Masum from Bangladesh. I m a mechanical engineering student and I also work in power plant with my diploma certificate where I have to face a lots of pump related problems. and I found it very informative. it helped me a lot to understand the working mechanism in pump side. so I urge you to keep making such wonderful videos o different topics related to engineering . Thank you very much and a great job you done guys.
Nice & informative video. Looking forward for more videos.
Suggestions:
Reciprocating compressor
Centrifugal multi stage compressor
Roots blower
Gear pump
Mechanical seal
Gas Turbine
Very nice and imformative video Sir, thank you!
Most welcome!
Wonderful and very informative. Is there any video on ship's steering system ?
For Educational and professional purposes Please Make a Video to show us all about pump calculations. Your explanations really is very educative and purely understandable
Best explanation
Thank you
Best course for industrial study
Thanks!
Excellent..
Very nice.
thank you!
You're welcome!
Hello, Thank you for your effort. it is really helpful.
cold you explain what is the disadvantage of mechanical seal on the pumps?
saVRee 3D Thank you.
Amazing explanation, must have taken a lot of time to edit and make these kind of videos I imagine...
Thank you ❤
You're welcome 😊
Nice Video ...sir
Great !!!
Perfect
Super explenationnn
Very nice sir
Thank you sir ❤️❤️
Most welcome
Good experience
Thanks
Thank you so much sir
Most welcome
Excellent video. Can you also make video of API submersible vertical pump . I just now subscribed your channel. Keep going
I like all your videos. Can you please tell me with which software you do ur animation? Is it fusion 360?
Thank you sir
Welcome
Thanks for your details explanations, I have a question, Valute casing and Casing housing for centrifugal pump - are they the same??
The volute casing is a kind of casing housing. You may see other casing design which is not volute. In that case, you will see a diffuser ring that changes the kinetic energy into pressure energy. You can look up the diffuser ring in the video @ 3:00.
Just started watching this video but before I finish I want to pose a question. We are putting our Dean Brothers mc 10 centrifugal pump back together. We installed the impeller. We go to tighten the impeller nut and if we hand tighten it, it spins nicely. If we just start to tighten it with the socket just a fraction of the, the impeller locks up.
Please can you make videos on course of compressor., rocket & space ., (industrial element like furnace,steam trap, burner etc)?
Nice model. Pull the threads out of the packing gland though or you won't be able to move the gland in when you tighten that nut you modeled. The gland should have through holes for the bolts.
Good
Don't ball bearing races spin half the speed of the shaft? Nitpicky, because it's an amazing quality video!
Can u pls explain seal gas system used in any equipment ( like turbines).
what software did you use for the illustration. Very nice software, images already rendered at every view/angle of the camera (view)
I like very much
Thank you sir an very well explained
Great video and good job explaining the different components. I have a better understanding now of how it works, however I'm still wondering why a stuffing box is so important? What would happen to the pump if the stuffing box wasn't there? Would the pump just leak, would there be any damage to the pump or shaft?
you answered your question. Leak 😂
Very informative video. 👍 Is a gearbox an alternative to bearing housing? In what cases are gearboxes preferable?
saVRee 3D Thanks for your reply. I look forward to a broader perspective. 👍
Great explanation!
I just have a question, what is the main difference between diffuser and volute?
They both do the same job (convert kinetic energy to pressure energy). Volutes are larger, so not the preference for multistage pumps. There is a 4 hour video course for centrifugal pumps, check out courses.savree.com to learn more (or this ua-cam.com/channels/osExgfjj-DhMJXnQd2Y4gA.htmljoin).
While starting a centrifugal pump is it necessary to shut off the discharge port? I have heard it in many application they do so, if yes; why is it done and where will the fluids go and how does it affect the current required (power) for the electric motor?
Do all pumps centrifugal pumps that are sealed with gland packing have lantern rings?
Sir , what is the purpose of the wear ring is it to provide a smooth surface for the impeller to rotate
I need help. I noticed that most centrifugal pumps impeller eye have a outward circular extrusion around the inlet. What is the purpose of this? does it have any role?
Does lantern ring rotates with the shaft?
which software did u use for design
How can we check the pump casing concentric
So, the leakage from the packing is normal. Is the drainage of the cooling fluid, isn´t it?
ياريت يكون فيه ترجمه الي اللغه العربيه 👏👌
I didn't get it
How do the wearing actually stop flow from discharge to suction?
Plzz help
👍