Thanks so much! The microphone/ hand piece is mounted to a Clic on dash mount: www.holdmyphone.com.au/ford-ranger-wildtrak-everest-next-gen-carphone-dash-mount while the dash mat is a Shevron product: www.shevron.com.au/product/ford-ranger-dual-cab-ute-dash-mate-dashboard-covers-dm1244/
Great vid guys. Is it easy enough to take off panels behind rear seat. I have my sub box there. But it rattles all the trim and it's very annoying. So I need to sound deaden it. I have Hertz MPS 250 2ohm and Helix M One amp
@@stephenshiels5179 thanks so much! The panels arnt too hard to remove but you need to pull the side trims off as well to get behind there. Best to start with pulling the seat out and go from there 👍
They look like Neoprene seat covers made by THE WETSEAT. I have those in my Ranger PX3. Great product. Fit is perfect. Got mine with orange stitching [Wildtrak]. Looks OEM.
Hey Dean, Not certain on the additional weight. There is around 20kg worth of sound deadening material alone though + Battery, inverter, amps, cable etc. my guess would be under 100kg Different phases for the build are a little customer dependent, best to send us an email at canfitcollective@gmail.com to chat further
Definitely made a big difference in the lower frequencies and most notably the highs from the tweeters. Best results will be seen once it’s properly tuned in a couple of weeks time but along with the sound proofing it made a big difference
That was interesting to watch, the quality of workmanship is amazing.
😊 thanks heaps!!
That was nuts! Dual power set up
Turned out great!
Now this is awesome content. Thanks
Thanks so much!
I just got mine last week 2024 Ranger raptor black, I’m loving it
Awesome! We work on quite a few of them at the moment, very popular!
Shmick install boys !!! 🙌🏼
Thanks so much!
Awesome build, great work. What dashmat works on the stedi switch panel? And what is the uhf controller mic mounted to?
Thanks so much! The microphone/ hand piece is mounted to a Clic on dash mount: www.holdmyphone.com.au/ford-ranger-wildtrak-everest-next-gen-carphone-dash-mount while the dash mat is a Shevron product: www.shevron.com.au/product/ford-ranger-dual-cab-ute-dash-mate-dashboard-covers-dm1244/
I wish this was available in the U.S.!
14:21 watching him scratching that screen with those switches stressed me out 😩
All of the dismantling and practically destruction that went into the job and this was the thing that triggered you 😂
Are those seat covers? I love them😊
They most certainly are!
Was kinda hoping to hear the stereo after all the upgrades.
Very hard to capture it on the microphones we have plus you run into copyright issues depending on what you pump through it...
Great vid guys. Is it easy enough to take off panels behind rear seat. I have my sub box there. But it rattles all the trim and it's very annoying. So I need to sound deaden it. I have Hertz MPS 250 2ohm and Helix M One amp
@@stephenshiels5179 thanks so much! The panels arnt too hard to remove but you need to pull the side trims off as well to get behind there.
Best to start with pulling the seat out and go from there 👍
Which model/brand is that two way dash cam sir?
The customer supplied the camera, its a Blackvue 750S with external power magic for parking mode from the Aux battery.
hi
very interesting project
I noticed the seat covers, can you tell me where you got them from and are they any good?
They look like Neoprene seat covers made by THE WETSEAT. I have those in my Ranger PX3. Great product. Fit is perfect. Got mine with orange stitching [Wildtrak]. Looks OEM.
Hey guys I like what you did to that raptor. Looking into weight, do you know how much that added and rough costs for that build?
Thanks Dean
Hey Dean,
Not certain on the additional weight. There is around 20kg worth of sound deadening material alone though + Battery, inverter, amps, cable etc. my guess would be under 100kg
Different phases for the build are a little customer dependent, best to send us an email at canfitcollective@gmail.com to chat further
How does it sound?
Also how many boxes of car builders sound deadener did you need to cover doors, roof and back area?
Depending on your level of coverage 3 boxes of the stage one is more then enough
@@canfitcollective thank you sir!
How many litres is the enclosure for the sub please.
The Box is around 14 litres before the sub displacement
@@canfitcollective is it ported?
Can i pay you guys to come trinidad to customize my raptor?? Seriously asking
Best send us an email canfitcollective@gmail.com
Was this much of an upgrade over the factory stereo? Worth doing?
Definitely made a big difference in the lower frequencies and most notably the highs from the tweeters. Best results will be seen once it’s properly tuned in a couple of weeks time but along with the sound proofing it made a big difference
@@canfitcollective awesome. So the soundproofing was worth it too? Considering doing the same car builders kit in mine + the floor.
@@711mx3 Dollar for dollar it’s probably the biggest improvement you can make to any car
Did you do that?@@711mx3
Is that a 12" sub?
10 inch Alpine Type R shallow sub