Loving the Attention to detail with fabricating them panels. those little indents where the grommets go on the Upper sill section will make all it look like factory once its all put back together. Cracking Job!
I am doing the same thing to my, only thing is my doesn't even look like she'll or like it was something. Watching your videos has given me a batter idea of how to build it. Keep up the good work 💪
This is truely a wonderful repair. The eg hatch is intricate around the rear of the sill and the jacking point - difficult to fabricate and the near sude is worse with the filler neck. Also - repair panels are the wrong shape - no flair on the wheel arch the way it should be. Early repair sections had it - but they are no longer available. Great video and thank you for sharing.
очень приятно смотреть особенно понимая что летом придется делать практически такую же процедуру на своей EG, удачи в ремонте с нетерпением жду продолжения) много интересных решений и моментов подмечаю спасибо большое.
Such impressive work , and with simple tools too , its certainly inspiring to get myself in gear to get on with my. 95 prelude loving the videos and your channel
@@mullac720 well if you find yourself" un busy" there's one here that needs some of that love you giving the EG haha 🤣 also I've re edited my last comment as I made myself look a tad special with that spelling 🙈🤣
This is so incredible! How were you able to weld in the new quarter panels without it warping the metal? Ive done this before, but no matter how slow i go, it ends up warping...
Cheapy wolf mig 140, don't think you can buy them new anymore. And using lidl/parkside 0.6mm flux core wire 🤣 really should go to gas so it's easier for the thin sheet metal😱
This guy is the best I ever seen when it comes to body work. Wish he was near by.
It be nice if he would explain some of the things
Subtitles give extra info
I just love your attention to detail and the good clean work you do. Your videos are educational and a joy to watch. Thank you for sharing.
Welding 0.9mm sheet with flux core, that's impressive
Dude your craftsmanship is superb
Very nice job! I love watching your work before sleep with some music, it is just my chilling zone Regards from Poland!🙂
i love the idea of using simple things to assist u with the work like the magnets and the tape
Loving the Attention to detail with fabricating them panels. those little indents where the grommets go on the Upper sill section will make all it look like factory once its all put back together. Cracking Job!
Thanks mate 😁♥️
Nice prep work 😊
car is coming real good keep it up man work will pay off at the end.
you are the best i have seen so far when it come to metalwork.
I appreciate that!
I'm from Thailand, I really like watching your videos.
Thanks for watching ♥️
I am doing the same thing to my, only thing is my doesn't even look like she'll or like it was something. Watching your videos has given me a batter idea of how to build it. Keep up the good work 💪
This is truely a wonderful repair. The eg hatch is intricate around the rear of the sill and the jacking point - difficult to fabricate and the near sude is worse with the filler neck. Also - repair panels are the wrong shape - no flair on the wheel arch the way it should be. Early repair sections had it - but they are no longer available. Great video and thank you for sharing.
Thank you. Gotta use what you can 👍. Thanks for watching ♥️
ive been waiting for this so long keep the good work man
Very nice work
очень приятно смотреть особенно понимая что летом придется делать практически такую же процедуру на своей EG, удачи в ремонте с нетерпением жду продолжения) много интересных решений и моментов подмечаю спасибо большое.
Appreciate it. thanks for watching the vids
Such impressive work , and with simple tools too , its certainly inspiring to get myself in gear to get on with my. 95 prelude loving the videos and your channel
Thanks mate ♥️, love the preludes too 😍😍
@@mullac720 well if you find yourself" un busy" there's one here that needs some of that love you giving the EG haha 🤣 also I've re edited my last comment as I made myself look a tad special with that spelling 🙈🤣
Awesome hand works🙏🏼🫡
nicely done
Nice job man!!!! Cant wait to see this car turn into a ricer
😂😂😂
Awesome
This is so incredible! How were you able to weld in the new quarter panels without it warping the metal?
Ive done this before, but no matter how slow i go, it ends up warping...
Really slow and putting compressed air on it helps. But there was some warpage on one side. But I just knocked it out with a hammer and dolly.
woww i love this !!! anyway if i have eg6 the condition like yours how much if i want restore it 🤤
Phenomenal attention to detail. Are your plans to bring it back to stock then modify?
Yeah just tastefully modified. Not back to stock stock 😁
делает кайф хондоводам. лучший подход
Друг, подскажи, какой клей наносил на левую арку?
welder was setup really well, which one you using and wire etc?
Cheapy wolf mig 140, don't think you can buy them new anymore. And using lidl/parkside 0.6mm flux core wire 🤣 really should go to gas so it's easier for the thin sheet metal😱
nice job were u happy with the quaters and i see there's a sliver one on DoneDeal for just under ten grand so you're in the money
Yeah happy enough. Came out pretty nice, won't need much work before paint 😁. Yessssss 💵💵💵 🤣
I was waiting for a long time, greetings from argentina.
💯
Hey anyone know the name of the tool at 20:43 not the magnets but the little boxes if y’all know of any good magnets like this tell me too thanks !
Butt welding clamps
Добрый день. Пожалуйста ответьте, что за состав вы наносите на края элементов из баллончика золотистого цвета перед нанесением грунта.
Copper Weld through primer.
So nice to follow this process, amazing what you do to this car, they start to get rare in an good condition.. masterpiece🤩
Glad you enjoy it!