I just watched the video of the Bedford running at some racetrack there in Australia and when you hit that straight man that thing would scream you guys did an amazing job but like you said bigger turbo why not!?!?
He used to be very mysterious when the Bedford build started back on the MCMTV2 channel but now he is more camera happy and showing his fknMillsi side 😅🤣
consider CoG and weight transfer as all those asses get shifted towards the rear at the 60ft mark. my question would be can it keep 4 wheels on the ground? #wheeliebar
9:38 Not deep enough Woody. You should put them on properly for proper protection. Pull the ear from behind with the opposite hand the straighten the canal, then insert the rolled up plug as far as it will go.
Watching between job interviews to relax, not in Bedford but the north of england which is also full of old vauxhalls - always great content boys keep it up!
It is not uncommon to see manifold pressures equal to boost pressure or even slightky higher. Turbine housing options play a massive role in reducing that backpressure but then also affecting spool negatively. This build is mental I absolutely love it.
The Bedford Barra is quite ridiculous & as such all I can say is FANTASTIC KEEP UP THE GREAT WORK!!! Y'all nailing it. I remain, after a very long time, still very impressed & entertained by you guys. Legend status attained. DO NOT STOP
Hey guys the next time you are at the Hoff's for a tune, you have to try out the pastries at La Bouche they are the best. They are right next door to the Hoff's.
Always good to see Skid Factory at The Nugget Garage aka Cleveland Exhaust. That van is like: "bring the whole family to chop cars down at FKN millsi's!" Good to see Hoff making changes in his workplace to make his life a bit better, it shows on his face. That KE10 Hayabusa is gonna be mad. As was said in a famous movie once: "Speed's just a question of money: how fast do you wanna go." Obviously that's a bit obtuse because competent people is what gets you the speed ultimately. Do they make a turbo the size of Millsi's head? And bigger.
@@mrnicktoyou because the larger engine makes so much more exhaust volume at a low rpm that the turbo can never reach a high enough rpm for the compressor to make its rated flow #. The turbo "chokes out" as they say. On a smaller engine that choke point still happens but it comes at a much much higher rpm, possibly and hopefully higher than the engine even gets spun to. Or if you keep upping the boost (and thus power and thus exhaust volume) the smaller engine will also choke out the turbo before max engine rpm as seen in this video. Measuring back pressure is a great way to see if the turbo is maxed out, they measured it here but didnt let us know the number😔 usually twice the boost number means the turbo is basically done. A bigger turbine wheel is the solution and garrett has a g45 out now with just that!
Awesome video guys, had a very strange vision when the Barraford was torquing over on the dyno, just could see like a remake of Mad Max (seriously though, I hope that never happens) but with Housos characters, when Max first sees the interceptor, except it was Pauly meeting the Barraford.....
Loved the episode! That Barra sounds so sick and it revs so fast! Maybe do a episode of Al and the Hoff discussing the Nexus R5? Seems like a really epic unit.
Bedford+ too much boost= go very fast or Go Boom! Awesome, awesomer that it was and that's going some! Congrats gents! Millsi's dream of doing light speed in a brick is getting real close! FR
Hoff did a small pull, gate opened and I was like "fuck that's loud" the next clip was the boys sharing around ear buds.. she must be fuckin loud! Sounds absolutely mental!
I love how the videos are 50/50 serious and 50/50 f'n around talking shit and bloopers I was however expecting the hoff to say yeah ordered 6 kebabs ... what did you guys want?
In engineering we approximate the power output of a turbine by the change in enthalpy across the turbine which is a function of the pressure and temperature of the gas.
Red supra next door wondering wtf is going on here... I just watched driftwork's video about the pajero evo with supercharged V8 swap and now this 1000hp bedford... Competing for cool oddball (big ones) builds.
Let's get The Hoff to 50K SUBS!
ua-cam.com/users/NuggetGarage
I just watched the video of the Bedford running at some racetrack there in Australia and when you hit that straight man that thing would scream you guys did an amazing job but like you said bigger turbo why not!?!?
Wish I could sub twice, his content rocks.
Subscribed.
Can't help... Since I subscribed before you gave them the first shout-out :D
been there done that a long time ago and everyone else should have too !!
Sat watching a vid about a Bedford, in my bed, in Bedford in the UK. Good times.
You should get a Bedford, and put your bed in it. Then you could watch a Bedford in your Ford Bedford bed in Bedford before bed.
Horsepower inception!
🤣
There’s a Ford in that word “Bedford” about the engine you could use.
Not good enough.... bed needs to be in a bedford..
"Millsi, when did you know you went too far?" "When my fuel pump was louder than my four digit horsepower Barra"
Millsi needs to be in more episodes. He loves the camera by the looks of it and he seems to love a bit of banter.
He used to be very mysterious when the Bedford build started back on the MCMTV2 channel but now he is more camera happy and showing his fknMillsi side 😅🤣
But the camera doesn't love me! I do like me some quality banter!
@@fknmillsi don't put yourself down like that mate. You're photogenic enough, particularly in present company. I mean, what's up with Woody's hair?
@@mitchellsichter awww shucks, thanks mate.
Soooooo, you like stuff??..............
@@fknmillsi stuff is cool mate but I like things better.
Saw the Bedford running at power cruise, that car is an absolute weapon. Sick car, sick build.
"Man-sized turbo."
Them's fighting words.
I love the saying "them's fighting words!". You cant make it fit with a lot of things.
Yes, shots fired. And it’s not like Millsi won’t bite.
Pro tip. Pull your ear outwards whilst putting in your earplugs.
It opens up your ear and the plugs actually work half decent..
That was the best commercial break I've ever seen for the merch store. Had to show the misses 🤣
Do you think it'll run 10s with 7 people in it?...most terrifying ride along ever.
consider CoG and weight transfer as all those asses get shifted towards the rear at the 60ft mark. my question would be can it keep 4 wheels on the ground? #wheeliebar
Yes.
9:38 Not deep enough Woody. You should put them on properly for proper protection. Pull the ear from behind with the opposite hand the straighten the canal, then insert the rolled up plug as far as it will go.
you'll know when it starts tickling your brain. but it is good to see some ear protection being worn for sure
tinnitus sucks
Love how once the loud pipe went on the camera was suddenly much further away haha
"Didn't want to blow it up on camera" What a legend!
30hp per deg is some sweet meat zone hoff
20degrees at 42psi makes The Hoff nervous.
@sloppy mechanics youve paved the path in the LS world, Calvins doing great 4200 stuff lets see you do a Barra or maybe 2J
@@theskidfactory you pull any plugs or nahhhhh, add some fuel and take some spark from the back and press on eh
Yeah we pulled plugs twice and they looked fine so he pressed on. This is a very very expensive engine though so he was rightfully cautious.
@@theskidfactory no 2k Barra?
22:00 LOL. Genuinely made me laugh. I appreciate a subtle merch pitch.
What merch pitch? Must a missed it ; )
Hell Yeah !!! This is my favorite build on the channel. I love that Millsi is doing this proper.
My 'straya godness.
That machine is insane.
Greetings from NL (Alex and Stijn)
The Hoff is essential viewing. Nugget garage is where I get all of my industry standard techniques.
Watching between job interviews to relax, not in Bedford but the north of england which is also full of old vauxhalls - always great content boys keep it up!
Hub dynos are such game changers. No strapping down the car, no traction issues, tire and roller wear, nothing.
It is not uncommon to see manifold pressures equal to boost pressure or even slightky higher. Turbine housing options play a massive role in reducing that backpressure but then also affecting spool negatively. This build is mental I absolutely love it.
The Bedford Barra is quite ridiculous & as such all I can say is FANTASTIC KEEP UP THE GREAT WORK!!!
Y'all nailing it. I remain, after a very long time, still very impressed & entertained by you guys.
Legend status attained. DO NOT STOP
This deserves the Best Merch Segment 2021 award.
The Bedford is cool, too!
I was waiting for this one! And it did not disappoint.
Does Haltech offer a sphincter sensor?
Hey guys the next time you are at the Hoff's for a tune, you have to try out the pastries at La Bouche they are the best. They are right next door to the Hoff's.
that Barra F'n SCREAMS !!!!! DAYUM way to go good to see Hoff again been a while
Love the turbo shorts, can feel the low end boost already!!
"It's a bit of a data overload."
Laugh in KSR
That ad! ❤️
Loved seeing the van chop so many cars at powercruise
Bunch of legends, from down under, and not a single sandal/flip-flop in site :D
It's not summer yet (Dec 1st)
And in Oz they call then thongs, and here in NZ we call them jandals (sandals have a heal and don't go between your toe)
@Whats my name again? Yeah, probably only 25 or 30?
@@mcullennz Wasn't sure what y'all called them down there. haha! Thanks for getting the cleared up!
Always good to see Skid Factory at The Nugget Garage aka Cleveland Exhaust.
That van is like: "bring the whole family to chop cars down at FKN millsi's!"
Good to see Hoff making changes in his workplace to make his life a bit better, it shows on his face.
That KE10 Hayabusa is gonna be mad.
As was said in a famous movie once: "Speed's just a question of money: how fast do you wanna go."
Obviously that's a bit obtuse because competent people is what gets you the speed ultimately.
Do they make a turbo the size of Millsi's head? And bigger.
1100rwhp through a 75mm turbine wheel is damn impressive! Would love to see where it would choke out on an LS. Maybe 850-900 or so.
Why would the turbo make less power with an engine with more capacity?
@@mrnicktoyou because the larger engine makes so much more exhaust volume at a low rpm that the turbo can never reach a high enough rpm for the compressor to make its rated flow #. The turbo "chokes out" as they say. On a smaller engine that choke point still happens but it comes at a much much higher rpm, possibly and hopefully higher than the engine even gets spun to. Or if you keep upping the boost (and thus power and thus exhaust volume) the smaller engine will also choke out the turbo before max engine rpm as seen in this video. Measuring back pressure is a great way to see if the turbo is maxed out, they measured it here but didnt let us know the number😔 usually twice the boost number means the turbo is basically done. A bigger turbine wheel is the solution and garrett has a g45 out now with just that!
The Badford sounds savage! Nice one 😎
Hands down, best automotive content in Australia. Keep it up Al and Woody!
Hoffs the KING !!
Been watchin since day one and just wanna say its great to see you still dont take any of this quote unquote dream job for granted, keep it up fellas
Woody, the merch plug was gold , well done as always
Awesome video guys, had a very strange vision when the Barraford was torquing over on the dyno, just could see like a remake of Mad Max (seriously though, I hope that never happens) but with Housos characters, when Max first sees the interceptor, except it was Pauly meeting the Barraford.....
I would watch it all the way through, but I'm knackered and it's 23:44 in the UK. so till tomorrow!
Millsy's such a legend...
this is a wholesome episode
I love the way the Hoff has colour matched his knees to his outfit :D
The Hoff = Nick Frost!!
This series has convinced me that my dream swap is a Barra into my e30
1JZ or N54 would be an awesome fit for e30, Barra is long, tall and heavy, upset the weight balance
@@yjkader when you can make 1200hp the weight doesn't really matter,
LOVE the mech skit !!
@The Skid Factory
What a great morning, got my coffee and watching how skids are made.
Loved the episode! That Barra sounds so sick and it revs so fast! Maybe do a episode of Al and the Hoff discussing the Nexus R5? Seems like a really epic unit.
On the next episode of spending Millie's money 💵, love the channel and keep it up mate 👌
You two look like you really love what you do, gotta love it.
That intro sync though 👌🏻 🎶
when The Hoff smiles, you know it means biznus
Bedford+ too much boost= go very fast or Go Boom! Awesome, awesomer that it was and that's going some! Congrats gents! Millsi's dream of doing light speed in a brick is getting real close! FR
Eleventy Twelve house powers is a good start.
Thx Millsi's
Well done boys great episode. Love the Hoff's tuning.
Awesome Video lads
Really well done and well explained
Nothing like a Sleeper that will suck the doors off a supercar
Hoff did a small pull, gate opened and I was like "fuck that's loud" the next clip was the boys sharing around ear buds.. she must be fuckin loud! Sounds absolutely mental!
My eyebrows raised everytime that screamer opened. Sounds mental.
Hoff time! Excellent!
🤣🤣🤣Millsi funny as hell
Please! More on that mitsubishi van doing the burnout. That would be a dream sleeper!
Been waiting for this one for a while now.
That’s some good content right there fellas! I need that skid factory n54 content woody!
Oh thank god! I was missing my weekly Hoff fix.
Barras sound so much better once de-stroked
Great episode that engine sounds fantastic
Drown the Woody in Merch! :-) that was a great way to promote the Merch! keep that kinda creativity comin boys!...I'll have to place another order!
Best sounding taxi engine ever.
Merch sketch making me buy merchandise.. Good work lads
I love the choice of words.
It 'needs' a bigger turbo
Is there anything better that a Bab n Coke combo? Your doing Jebus's work boys spreading the love of Bedford's and boost.
I love how the videos are 50/50 serious and 50/50 f'n around talking shit and bloopers
I was however expecting the hoff to say yeah ordered 6 kebabs ... what did you guys want?
I want a Barra in the US in my 72 Ford courier so bad.
Been absolutely frothing for this episode 🤙
Nice! Just before bedtime 00:02
Hope this party bus is at summernats! Wicked content team. Best channel on the balls!
This is mental, in a good way.
Bigger turbo time 👌🏻
The Hoff is always right!
Mabey because he's tunning the car😂. He just stopt when he's right😛
I just realized that replacing Ethell allowed Hoff to get two competent employees and splurge on food for guests aswell. 😛
WOWWWWW
I think send it too the moon comments and resulting carnage may have put a limit on splurging for food for guests???
@@73bigted he broke the shit outta stuff last time he said that
Not wearing earplugs for this has got to cause some long term hearing damage. Especially if you tune for a living, come on Hoff protect yourself mate
Great episode guys! 👌
Got to be happy with that the best bed ford
This Bedford is definitely living its best life
In engineering we approximate the power output of a turbine by the change in enthalpy across the turbine which is a function of the pressure and temperature of the gas.
So what you're saying at 13:00 is "danger to manifold"?
A back to back Comparison g42 to g45 would be a killer video
G45 has already been ordered
@@fknmillsi 🔥🔥🔥 this will be interesting hopefully it will see's your 1000kw Goal
@@crojet747 probably not. It's pretty cruisy to drive with 1100hp, another 200 or so might spice it up.
Yet again another top job guys 👍🏻🍺🍺🇦🇺keep up the great content
Thank you for your insights and video 🙂❤👍
Watching Project Binky the other night and Pmsl when Millsi got cursed for making CF vans impossible to buy in the UK
Have you guys played with the single cam 4.0? I always just see you with barras
Barras love timing. Don’t be shy
👍👍👍...crazy ..what an absolute weapon...👍,seen some footage of Bedford beating people up at powercruze...🤘
The word is milsy has been distributing grass in this vehicle
Great video,
Question, how much did the manifold pressure drop when you pulled the exhaust off?
It didn't.
Bunch of legends xx
Big Al. Maybe 854wHp with this 3.8ltr Barra' on BP 98 Ultimate is sensible ? After all it's only a Bedford van man ! V.
Red supra next door wondering wtf is going on here... I just watched driftwork's video about the pajero evo with supercharged V8 swap and now this 1000hp bedford... Competing for cool oddball (big ones) builds.
So im guessing that taking the exhaust off lowered exhaust backpressure somewhat and added some power?
Fricken Missli looks like a modern day Bon Scott from ACDC