Hi, I am pretty new to helium, been working with air for a long time but new to the helium game. I am wanting to do a helium deco bubble with helium 5 inch inside the bubble and also a cluster of 5 inch underneath, I think you call it a collar? Would the collar balloons need to be helium as well or can I use air for them?
Thanks Greg and Chris. I have done this with printed bubbles before but never the Orbz. Please please please make a deco Orbz balloon Amscan (valveless clear)
Hello, I have tried this design and I was really pleased I managed to do it, BUT the next day it was on the floor. I used helium in the orb and in the small balloons. Used a modelling balloon to tie the balloon. Any ideas what could of happened?
Hi Karla! The Clear Orbz, Bubble Balloons and Aqua Balloons are all made by different manufacturers and made in different ways. I believe they are all made from stretchy plastic but I'm not too sure!
Hello , thanks for the instructions. I’ve tried this but the next day the balloon shrivels up slowly. I always feel I tighten it quite a lot but still somehow the helium escapes. Any tips?
Balloon Market thank you will try the modelling balloons! I’m assuming this is the reason the vinyl starts to shrivel on the balloon as it is slowly loosing helium? Also the balloons I put inside also start popping slowly. Why would that be?
Balloon Market no they were air filled. I’m assuming that is the problem. I will make sure they are both helium filled next time. I heard deco bubbles are better than clearz with vinyl. Maybe that’s why they are wrinkling off too
You guys are brilliant! Do have any ideas on how to do a poppy troll? I can't figure out how to attach all that hair around a large round? Any ideas are appreciated!!! Thanks!!!!!
The only thing I can think of is creating attachment points around the balloon using tape like Mark did in this BMTV here: ua-cam.com/video/n-gs2cuIN6o/v-deo.htmlm53s
Hey guys!! Chris !! You are a GENIUS !!! You really rocked the orbz balloons!!! In my opinión the orbs are not clear enough. It would be great if Amscan could do it as aqua balloons !!! It would be very difficult, but we never know. A question...orbz last for about 3 weeks fullu inflated !!!! They are amazing !! What sort of mylar or material do Amscan use to do them?? See you in another marvelous video guys 😃!!!
Hi Leonardo! Thanks for the feedback! The Orbz are made from a special stretchy material, I believe the middle nlyon layer between the foil layers is thicker to allow for the stretch but don't quote me on that!
I'm afraid we don't stock bobo balloons but I think the plastic printed orbz are a thicker material and have a valve in them. The Clearz or Aqua balloons are more similar to the bobo balloons :)
Well, we think the answer to the video question will be the new Cristal Clearz balloons from Anagram, simply Amazing.. Wondering which will be helium volume and floating time for those Cristal Clearz balloons.
Good questions! I don't think Amscan will be able to provide accurate info because the Clearz are quite strecthy and therefore easy to over inflate. We inflated a sample 4 days a go and I don't think it has reduced in size at all - really impressive!
The trigger valve? The blue and silver helium nozzle? We sell this one! www.balloonmarket.co.uk/helium/helium-accessories/boc-accessories/trigger-valve-for-use-with-boc-extension-hose-1?cPath=12_52_303&
A pleasure to watch! What a lovely pair :)
The orbs are amazingly pretty clear and I love your innovative ideas and designs
i know I am pretty randomly asking but does anybody know of a good website to watch newly released tv shows online ?
@Archie Louis flixportal :D
@Zavier Garrett Thanks, signed up and it seems like a nice service :) Appreciate it!
@Archie Louis Glad I could help =)
Love the solid colour Orbz and use them a lot. However, I would really, really like to see a valveless clear Orbz. Oh the possibilities!!!
We would love to see one as well! We'll keep asking Gill!
The clearness is pretty much there. I’d be happy with that. Xx
I think it's pretty close particularly on the printed Orbz, Thanks Megan!
Hi Guys! Thanks Chris for the new ideas! I think Amscan is close to getting a clear orbz. Maybe another 30% more clarity.😊
No problem Sherrie. They are getting closer and closer, thanks for the feedback!
Hi, I am pretty new to helium, been working with air for a long time but new to the helium game. I am wanting to do a helium deco bubble with helium 5 inch inside the bubble and also a cluster of 5 inch underneath, I think you call it a collar? Would the collar balloons need to be helium as well or can I use air for them?
Hi Keeley, the balloon collar wouldn't need to be filled with helium you can fill those with air :)
Thanks Greg and Chris. I have done this with printed bubbles before but never the Orbz. Please please please make a deco Orbz balloon Amscan (valveless clear)
I'll pass it on Natasha! We think a Valveless Orbz is a great idea.
I thank they are clear enough.
What did he use inside smaller balloons; are filled with heluim.?Didn't catch what was in them
If the outer balloon is going to be helium filled, the inner balloons needs to be helium filled as well - and visa versa with air filled designs :)
Hello, I have tried this design and I was really pleased I managed to do it, BUT the next day it was on the floor. I used helium in the orb and in the small balloons. Used a modelling balloon to tie the balloon. Any ideas what could of happened?
Hi Joanne! How many of the small balloons did you add please?
Newbie.... so does the orb still float for the same amount of time with a latex balloon inside, even though latex only floats for 8 hrs or so usually.
Hi Victoria! The float time should still be very similar, however this can depend on the weight of the items you are stuffing the balloon with :)
when you say the orbz being near to made clear, are these not similar to the aqua bubbles or deco bubbles, im new to this !
Hi Karla! The Clear Orbz, Bubble Balloons and Aqua Balloons are all made by different manufacturers and made in different ways. I believe they are all made from stretchy plastic but I'm not too sure!
Hello , thanks for the instructions. I’ve tried this but the next day the balloon shrivels up slowly. I always feel I tighten it quite a lot but still somehow the helium escapes. Any tips?
Perhaps instead of using ribbon to secure the balloon, you could try a modelling balloon? We use this method on other ballooons and it works well!
Balloon Market thank you will try the modelling balloons! I’m assuming this is the reason the vinyl starts to shrivel on the balloon as it is slowly loosing helium? Also the balloons I put inside also start popping slowly. Why would that be?
@@ZA-sg3hs If your outer balloon is helium filled, are the balloons inside helium filled as well please?
Balloon Market no they were air filled. I’m assuming that is the problem. I will make sure they are both helium filled next time. I heard deco bubbles are better than clearz with vinyl. Maybe that’s why they are wrinkling off too
@@ZA-sg3hs yes, please try helium and helium. You can vinyl the clearz but as the balloon is so soft, sometimes it doesn't work so well!
Hi,may I know what is the pink colour material inside the Unicorn Obrz?thanks
Hi there! It is tulle :)
You guys are brilliant! Do have any ideas on how to do a poppy troll? I can't figure out how to attach all that hair around a large round? Any ideas are appreciated!!! Thanks!!!!!
The only thing I can think of is creating attachment points around the balloon using tape like Mark did in this BMTV here: ua-cam.com/video/n-gs2cuIN6o/v-deo.htmlm53s
Balloon Market ohhhh wow!!! I THINK YOU'VE CAME UP WITH IT!!! Thank you sooooo much!! So kind of you! Wow! I'm excited now!! Lol brilliant x
Great! Glad we could help, we would love to see some pictures of what you create! 😊
Hey guys!! Chris !! You are a GENIUS !!! You really rocked the orbz balloons!!! In my opinión the orbs are not clear enough. It would be great if Amscan could do it as aqua balloons !!! It would be very difficult, but we never know.
A question...orbz last for about 3 weeks fullu inflated !!!! They are amazing !! What sort of mylar or material do Amscan use to do them??
See you in another marvelous video guys 😃!!!
Hi Leonardo! Thanks for the feedback!
The Orbz are made from a special stretchy material, I believe the middle nlyon layer between the foil layers is thicker to allow for the stretch but don't quote me on that!
Love it! Can I use the same technique with Crystal Clearz?
Hi Anett, yes the same technique could be used on the 18" Clearz balloons :)
Brilliant, thank you :)
I'm willing to try this out.
We hope it goes well!
@@BalloonMarket Me too. I hate tossing products that I could've sold. I am kinda doubtful that I'll be able to tie it off tight enough.
Whats the difference between orbs and bobo ballons?
I'm afraid we don't stock bobo balloons but I think the plastic printed orbz are a thicker material and have a valve in them. The Clearz or Aqua balloons are more similar to the bobo balloons :)
Well, we think the answer to the video question will be the new Cristal Clearz balloons from Anagram, simply Amazing.. Wondering which will be helium volume and floating time for those Cristal Clearz balloons.
Good questions! I don't think Amscan will be able to provide accurate info because the Clearz are quite strecthy and therefore easy to over inflate. We inflated a sample 4 days a go and I don't think it has reduced in size at all - really impressive!
Where can I get the air machine? I live in the USA
I recommend contacting Premium - www.premiumballoon.com/
Hi where can I get the trigger bell from?
The trigger valve? The blue and silver helium nozzle? We sell this one! www.balloonmarket.co.uk/helium/helium-accessories/boc-accessories/trigger-valve-for-use-with-boc-extension-hose-1?cPath=12_52_303&
Tell Chris that orbz balloons are better than bubble balloons they’re transparent enough
We'll let him know! Thanks Mega- Man!
I would really, really like to see a valveless clear Orbz. oh it is possibleilties
Hi Louisa! Have you tried Amscan's Clearz? May just be what you are after :D
For me the valveless on the balloons will be easier for me. I am not want to made a mistake on the orbs Balloons with a valve
I know this was a while ago but the orbz are no way clear enough it would just look like a really bad dusty bubble in my opinion sorry