Glowforge Pro Laser Deep Clean and Maintenance
Вставка
- Опубліковано 22 чер 2021
- Drop a comment or question below if you have any questions about what or how I did something. Or just say hello.
Our pair of Glowforge Pro's are work horses running on average 8 hours per day. They get NASTY!
I wanted to show you my cleaning method using isopropyl alcohol in a spray bottle, a shop vac, and air compressor.
One of the most important components to keep clean is the air assist fan. Watch the video and see all the gunk that flies out when we hit it with air. Keeping this clean will ensure a laser that is giving you the best results. We will show you how to remove everything but use the links down below to visit the Glowforge site for more official detailed step by steps.
I prefer to vacuum most of the debris first that way blowing with the air compressor you don't get too much flying debris. Then vacuum again afterwards.
The rest is pretty self explanatory. Just routine cleaning and blowing.
======================================
#glowforge #madeonaglowforge #glowforgepro
GET $500 off a GLOWFORGE HERE: glowforge.us/f/HCHSCYCV
Shop Our Online Store: pghatco.com/
✓ Follow our Instagram: / pghatco
Fine us on Etsy: www.etsy.com/shop/pghatco
Leather and Leather Tools: www.weaverleathersupply.com/?...
Cleaning Your Air Assist Fan: support.glowforge.com/hc/en-u...
Cleaning Your Glowforge: support.glowforge.com/hc/en-u...
=====================================
The legal stuff: We do not work for Glowforge and were not paid in any way to post or make this video. The Glowforge referral program is part of the perk for being a Glowforge owner. When you save $500 on your Glowforge Pro with our link, we get $500 through the referral program. When you save $250 on the Plus model with our link, we get $250 through the referral program. This is all taxed at the end of each year by receiving a 1099 form you are responsible for filing with your federal taxes. Once you get your Glowforge you can then inspire others and get the affiliate rewards just like us and other owners. Owners also get a discount on proof grade materials. You can choose not to cash out your referral money and instead use it as a credit on the Glowforge store to purchase materials or another Glowforge. This is all 100% legal and posted in the Glowforge Referral Program Terms on their website.
I remember the movie Rad from when we were kids. Similar font. Your videos were why we bought our GF and we did use your code, so hopefully you will be seeing some funds from GF soon. Thanks Donnie!
We appreciate you! And yes awesome movie. It was actually released back in a few theaters last month I believe.
@@PGHATCO must have been a local thing. Didn't come out here, I'm envious!
You just blew my mind when you cleaned that lens with a microfiber cloth and alcohol lol. Also you were not gentle. We are so scared to break our Gandalf 🤣. Thanks for the video! Just gotta figure out the best way to keep inside by the fan clean. Ours gets all gunked up from the MDF we cut.
Ha! We've done this dozen of times so we know we are good 😎
Great video! Looks clean!
Im just starting out making leather patches. I am hand tooling leather patches. I have stitched a few onto hats but just bought a heat press for hats and wanted to know if you have a tutorial to show me how you attached your leather to your hats. Thanks. I also own glowforge and love this cleaning video. Thanks for making it.
Our patches are bonded. We do not have a tutorial because we have different processes that is dependent on leather type, outside temperatures, humidity, etc.
멋져요 잘 보고 있답니다.정기점검 좋아요 기계관리가 철저하군요..고장은 자주 발생하나요?
Thanks for sharing this video. You are always so helpful! What do you use as a weight to hold the leather down?
Thanks Scott. We have some weights laying around the shop we use. Sometimes we will use blue painters tape along the edges as well. I also just cut some thicker cherry wood stripes to lay along the edges that has been working well too.
Use strong flat (3mm) magnets
Wouldn’t lens paper be better than microfiber for cleaning optics?
Have you had to deal with the yellow light issue?
Awesome, I was cleaning this thing so gentle😂😂
What abt the water reservoir, do we have to refill at some point?
The laser tube? Glowforge replaces those at the end of their life for around $300 I believe.
We just ordered a compressor to use and we've never used one! Any recommendations for settings etc? Thank you!
Settings for your air compressor?
Any ideas on how to clean the widows on the inside for the focus system on the Print Head? Cleaning the outside just fine. Much ash gets under the window. I must manual focus to 0.050" to get clean cuts on 0.1165" MDF.
On the actual inside of the head? I have no idea. Maybe compressed air would help blow debris out of there.
@@PGHATCO All good. Second head on the way from GF. Original must not have been sealed well. Thanks for the reply!!!
@@jarrettporst4799 Awesome to hear!
What do you do to clean the exhaust fan?
Hey. There is a cleaning mode for the exhaust fan. I don't know if you have used it before but I didn't know it was a thing until recently. But I like to use Isopropyl alcohol to clean it. I spray it in and let it soak for a minute then go into cleaning mode that kicks the fan into high gear. Make sure you put a cloth or something in front of it to catch all the wet debris. Then just wipe it out.
Do you mix or dilute the isopropyl alcohol before putting it into the spray bottle or do you just use straight up 70% isopropyl alcohol?
Straight up
I would be careful hitting those fans with the air that fast. I had a fan explode on my 3D printer doing that.
Yikes. Appreciate that and will take extra care next time.
You don’t take apart the honeycomb try to clean it?
I have never taken that piece apart. I blow it out with air.