How To Install Graco Extend2Fit Convertible Car Seat Front-Facing
Вставка
- Опубліковано 28 сер 2024
- Watch how to install the Graco Extend2Fit convertible car seat in a front-facing position.
Children who meet the proper age and weight requirements should sit in a car seat that is in the front-facing position in order to remain safe. The Graco Extend2Fit car seat lists the weight of 22-65 pounds as the acceptable weight to ride in a front-facing position. It is best to have your car seat installation checked by a certified or trained installer. It is common for local police departments to have someone on staff who is trained in not only reviewing a car seat installation, but also performing the installation at no charge.
The Graco Extend2Fit convertible car seat includes an extension panel with four positions, allowing for up to five inches of additional leg room. This is a key feature when front facing, as there tends to be more open space in front of the child since passenger seats can be moved forward, allowing for more room. There are three recline positions on this car seat that can be used when riding in a front-facing position. The headrest adjusts to ten different positions. The seat cushions are machine-washable.
Overall, there are collectively really good reviews of the Graco Extend2Fit Convertible Car Seat. I have used the car seat in both the rear-facing and front-facing positions and am happy with the ease of installation and comfort of the seat cushion and headrest padding. The extension panel is the feature I like the most because it allows for my child’s feet to keep from dangling, which is key when your child is trying to sleep.
#Graco #CarSeat #RoomSweep
Lost the english version of my mannual and had the hardest time trying to figure it out by the photos alone. Thank you so much!!!! Huge help!
Glad it helped!
Bro, you saved my marriage. Well and easy explained. Thank you
Thank you so much. I reread the manual about 3 times and it wasn’t as easy to understand as this video is! Thank you for helping me!
Thank you for watching, June!
You'll have to put the foot tray in, as it is rear facing only. Otherwise not a bad install. Be sure to take out the infant padding, check the weight limits on your forward recline, and only check for movement at the belt path.
Thank you for making note as I was also going to say the same thing!
You also have to use recline 4 for a child under 40lbs and over 40lbs the recline has to be on either 5 or 6. Foot trey can not be used forward facing.
Any chance someone knows why Position-4 must be used until the child is 40lbs?
@@dyip32 I was wondering the same thing! It doesn’t fit right in my car on position 4
The answer to your question is that kids under 40 lbs need to be reclined if the seat can’t be fitted rear facing
One small mistake. Extender tray is for rear facing ONLY. Says in the manual :)
Thank you! I was going to comment the same thing!
Two mistakes, you're supposed to remove the headrests
Eastwood Unforgiven it actually depends on the car and car seat if you have to remove the headrest.
I believe it also says not to use the foot tray extender and the angle is based on child’s weight.
Ok.
Perfect! Simple and we'll explained! Just got it delivered today. Can't wait to fix it in my ride.
We like the car seat a lot!
Just know extended panel can not be out forward facing. Read the manual for install.
Not All Heros wear capes lol good video. It helps visual learners like myself
I am glad it helped you!
@@kaitlyn563 how about you do a video and show us the "right" way.. once it's uploaded, please let me know.
VERY IMPORTANT !!!! theres another mistake, you didn't show how to attach lower anchor attachment....
Aww thank god!! My daughters grandpa brought his over because I didn’t have her britax car seat with me. This saved my lifeeee
Thank you! The instruction manual didn't mention you were supposed to tighten while still pulling on the seatbelt! I couldn't figure out why it wasn't working.
Thanks for the video! Saves a lot of time deciphering the instruction manual and pics correctly.
Thank you for watching.
This is installed incorrectly. The foot tray is for rear facing only. You need to take the infant bottom insert and head support out (it is only allowed to be used rear facing) and the harness covers need to come off (also only allowed rear facing). Please find a CPST to help you install your seat.
Your wrong
@@challengechannel2121 Nope, you're wrong. Read the instructions.
Thanks!
It says in bold in thr manual, the leg extention CAN NOT BE USED IN FORWARD FACING
What are the harness covers? The strap covers?
This really helps me because I was always nervous. Mine wiggles a bit so I used that short extension but it only clicks on one side so I’m now trying to get an extension (its so short it doesn’t fit in any car). But I’m glad I saw this because it meant I was doing it right , although my husband insists that I (me, not him) go to the fire station for help.
Keisha Ocasio this video is wrong also fire stations aren’t car seat certified so don’t have them install your car seat.
Thanks from a confused aunt at the airport
Page 49 of the manual states, “DO NOT USE extender forward-facing.”
Just a heads up.
Man, I was trying to use the straps that I used for rear facing, but it was too short for forward facing. Good to know it’s the car’s seatbelt I have to use now
You have to use the forward facing belt path. You can use latch for forward facing as long as the child is 45 lbs or under. You just have to reroute it for the forward facing path
@@natashadyke7004 where do you reroute it? Mine doesn't seem to come out.
Lost my instruction manual so this helped me. Figured out the seat belt part myself after about 5 minutes, but not the latch. Thanks for this.
Thanks for watching :)
Thanks for sharing! This helped me attach the tether strap to the rear car connector located behind the head of the rear seat.
Your video explained this install the best! Thanks!!
Glad it helped!
The vehicle manual determines if the top tether goes under or over the head restraint, or if the head restraint can be removed.
You’re pulling on the lap/shoulder belt.
Don’t lock the seatbelt until it’s buckled. It’s easier to not have to hold the locked shoulder belt. Be careful not to let it retract too quickly as it can switch the retractor back to unlock.
Dude such an amazing and simple video, thank you!!!
Glad you liked it!
Best video ever 👏🏻👏🏻👏🏻
Good vid. Thanks for posting. I did it this way also and followed you and it worked.
Great to hear!
Not trying to be rude but you should really take this video off if your not going to go into detail about the age of the child your placing in this car seat because you left out very critical info that is needed
The manual tells you on page 49, "DO NOT USE the leg extender forward-facing."
thank You Brother for the informative video. God bless you.
You shouldn’t lower the headrest to where it pushes the seat forward and per the manual in the Ford facing position, the extension in the front should not be pulled out
Thanks you!!! I have had this for months and i will finally use it lol
I am happy it helped.
thanks! your video helped me big time!
Glad it helped!
I hate to be this guy but you overlooked a very important step which is to slide the straps that lock into the car's actual seat.
Thanks for the video! Wish I could tell how you anchored the rear strap to the headrest. Would have been helpful to get a close up of that from the back of the headrest, but still much appreciated!
Sorry about that
@carseatlady is in expert in this. This dude clearly didn’t read the manual.
Omg you are a life saver. Thank you a million times
Tyree Davis this video is wrong
Thank you for the clear demonstration!
Both head and body insert should be removed , foot tray needs to be in , youre testing for movement the wrong way only test at beltpath. Please do proper research before uploading videos on UA-cam because you’ve now shown people how to install the seat unsafe and their child could be hurt in a crash and you could have a lawsuit.
A lawsuit though? I think you were being a little too over dramatic
Thank you very much for the video. I have the following problem, when my daughter falls asleep her head tilts forward. How can I keep it back?
You need to recline her back by pulling the recline in front of the seat but also remember she can only recline back to #4 #5 and #6 when facing forward the rest are for rear facing
What do you do with the clips that were used to hook it up rear facing? Now they just hang there. Do you not use them to hook it up front facing too?
Yes you do use them you have to pull it threw one side the side that will let you pull it the you lift one side of the seat covering and you slide the clips up and place them threw the back open sides then clip them back into the seat
@@chellevongarrett802 mine seems to be to tight. Belt not long enough to reach hooks in car? I was wondering if mines in wrong spot under car seat. Don't seem to be able to remove it. Thought maybe its suppose to also be going through back part marked in orange. Where car seat belt goes through? Thanks in advance if your able to answer.
@@kathleennasvaderani9244 hey Kathleen , when you take all the covers off . You can drag the clips up to the back slots where the seatbelts are . Make sure they aren’t tangled up . And it sits farthest back against the car seat so it doesn’t get in the way of any of the other straps .
Lap belt only goes across your lap. Shoulder belt goes across shoulder and lap. Just saying... how can I trust what you're saying if you don't know the difference between a lap belt and a shoulder belt?
La bandeja extensora no se debe usar a favor de la marcha. Lo dice el manual
Thank you!!
You're welcome!
Awesome! Thank you.
Thank you for posting this!! Great explanation. Very helpful!
Thanks for watching, Greg!
Nice, video, thanks for sharing with us this video, really easy to understand how you explain 👏
I don't see what it could hurt, but the istruction manual says "DO NOT USE the extension panel forward-facing."
Same. I know it says that but I would like a reasoning as to why. My son likes it so he can rest his feet
Thank you for your video
Thank you for your clear and helpful instructional video.
Quick question, how long does baby stay rear facing? Sorry first time Mommy here!
Jasmine LeAnn until at least 2 years of age. This particular seat goes up to 50lbs rear facing. My 3 year old just turned forward facing a couple weeks ago.
As long as possible! It’s the safest for kids to rearface as long as possible. This seat is great it goes up to 50lbs rear faced (average age of 5 depending on child.) facebook.com/groups/carseatsafety2.
This group is so great for car seat questions! Lots of awesome certified car seat techs to help keep your kids safe!
It is recommended to keep your child rear-facing for 2 years.
2 years or until the child reaches the weight limit.
The manual says rear facing is 4-50 lb and forward facing is 22-65 lb
Also says your baby must be able to sit upright unassisted in order to be forward facing
Thanks!
Your car literally has the attachment points to not use the seat belt. You can see in the video the markings on the the the adult seats
Thank
Unfortunately the extender tray cannot be used in forward facing
Yeah, instruction booklet is horrible, doesnt even tell you where to attach the tether....
very helpful,,,thx
Glad I was able to help!
I have the same one, and I hate it, so uncomfortable! baby seat belt falls, every time on seat, need to be fixed all the time, trash!
Can this recline when facing front ?
Thanks for the video, please how do I adjust the belt to hold the baby , it's not long enough and cant get his arms in it comfortably 🙏
Lift the headrest up there’s a button
There’s actually a button where a strap falls inbetween there legs u push that same time u pull the straps it gets longer
Very helpful video
Thank you, Alvin.
What about the other anchor straps on the side do you not need them for front facing?
You're supposed to take off the headrests when using car seats
No you dont. Not all cars are equipped with removable head tests.
it’s still wobbly though
What happens if I want to put the car seat in the middle?
Can't see anything you're doing 😢 but solid attempt
Hi, can you explain how to install graco 4ever to the first passenger seat in the car?
Are you asking about the front passenger seat?
My baby is 19lbs is this ok for her to start using??
She's still pretty little for forward facing.
you forgot to adjust the latch straps
Thank you so much !!
Thank you so much!
Thanks for watching!
If you’re gonna make a tutorial video on something as important as a car seat installation, please make sure you’ve read the manual. 🤦🏼♀️ You’ve got several unsafe errors in your installation!
This install is somewhat misleading. This install is only for vehicles that do not have the "bars" that you can clip into with the straps that come with the car seat, in this video you see it clipped in the section for the rear facing set up. That strap slides up the seat to the other holes for the front facing position. I would recommend using those over the seatbelt configuration if you can.
do not install with LATCH for a child greater than 45 lb
@@seanenright2497 Always best to check with a local police municipality or community center that has a professional, certified car seat installer available to check the install in-person.
Room Sweep police aren’t car seat certified. Join car seat safety group on FaceBook and ask them for help or use their website and find a cpst in your area
Thanks.
The extender should only be used in the rear facing position.
Very thorough
How do you adjust the straps for the shoulders? It’s too tight for my little one.
Mario Mario. The head rest adjust up and down and the top of the head rest should be 1 inch or more above the top of your lil ones head! But that also adjust the shoulder harness to allow ample room for your kiddos shoulders
very clear and helpful, thx a ton
is your car a kia forte?
No, it is not.
thank by the way you can also buy it from here
@t
Putting your knee and weight into the seat is no longer recommended and the tray is for rear facing only. 🤗
😊
Can u use latch with this?
It may depend on the car. For my vehicle, the latch was not required. I would suggest reading the manual or contacting Graco's customer support just to be sure.
Room Sweep I did and yes u can use a latch and tether
Or seatbelt and tether. 🙌🏼
Have you heard ♥️
Why not use the appropriate latch..most people dont need this as most vehicles now have had latches already
Because depending on the weight limit of the latch, highest being 65lbs for most vehicles, the weight of the child plus the car seat can exceed that.
When I installed mine I can't use recliner
There are a lot of inconsistencies in this video. I dont trust thos bone head.
You made multiple mistakes.! This video is a dangerous demonstration.
Like what? Please do tell.
I agree! You aren't suppose to use leg extender forward facing and you have to have it set at a certain number depending on their weight!
I'm so lost on how to install it forward facing. I'm more of a visual person so the instructions were hard to follow for me too.
_Serenity if you have Facebook or can get Facebook please do and join car seat for the little or car seat safety page. They will help you. If you can’t get access to it I’ll help you here. How old is your child and how much does he/she weight and height!
Never put your weight in a car seat! It’s meant to only hold 50lbs not anymore than that!
Thats only for protecting a child in the seat and has no bearing on installing it and putting your weight on it to make sure its secure.
This seat can actually hold 65lbs