How to use LaserGRBL to make your Laser Cut Projects

Поділитися
Вставка
  • Опубліковано 2 жов 2022
  • LaserGRBL is a functional way to run a laser cutter, but it can be confusing if you don't know how to use it. In this video we will make a project for your laser cutter using LaserGRBL and Inkscape that will teach you everything you need to know about creating with a laser cutter and free software.
    Download LaserGRBL: lasergrbl.com/
    Download Inkscape: inkscape.org/
    Be sure to like, subscribe, share and enjoy.
    3D Printing Professor is made possible by YOU!
    www.3dpprofessor.com/support/
    I'm social!
    / discord
    / 3dpprofessor
    / 3dprofessor
    Buy the Beginner's Guide to the 3D Printing Galaxy on Amazon: amzn.to/2ws7OiT
    Shop on Amazon to support the channel: bit.ly/3DPPrinters
    Follow my other 3D printing adventures at: www.3dpprofessor.com
    Join the mailing list and never miss anything important: bit.ly/3DPPnews
    All music by Kevin MacLeod (incompetech.com)
    Licensed under Creative Commons: By Attribution 3.0 License
    creativecommons.org/licenses/...
  • Розваги

КОМЕНТАРІ • 133

  • @GraflexParts
    @GraflexParts Рік тому +10

    You are the most pleasant to listen to of all the laser workflow tutorials I've seen so far. Thank you.

  • @drewachong
    @drewachong 7 місяців тому +6

    I am getting ready to start my home laser engraving adventure. This was not only helpful as far as learning LaserGRBL, but you did a great job making Inkscape easy to follow. Thanks so much!

  • @captkmk3226
    @captkmk3226 Рік тому +1

    well done, I'm waiting on my first laser printer and you have giving me a jump start on actually having a file to print when it gets here. THANK YOU

  • @ethansdad3d
    @ethansdad3d Рік тому +1

    Thank you for this introduction to LaserGRBL. I'm going to try it out.

  • @sunshine32100
    @sunshine32100 Рік тому +1

    Thank you so much!!! This is exactly what I was looking for and you explained it so perfectly!!!!

  • @langleysmith8595
    @langleysmith8595 10 місяців тому +1

    This is the most useful tutorial I have found . . . . . THANK YOU

  • @throttleonright3157
    @throttleonright3157 Рік тому

    WOW the perfect video, just what I needed to start creating, engraving and cutting one object. just assembled my Atomstack A5 M50 Pro and not a clue how to create my own objects, this is the eureka moment for me thanks a million

  • @taw6992
    @taw6992 Рік тому

    Great explanation. Thanks a lot for your clear and precise description of what it takes and just what it takes !!!

  • @Billa2720
    @Billa2720 Рік тому +3

    Gerbils with lasers attached to their heads? Dr Evil would be proud. Thanks for the video.

  • @tonyhopkins4399
    @tonyhopkins4399 7 місяців тому

    I've watched a few videos on Laser GRBL, this is by far the best

  • @stevevarney4747
    @stevevarney4747 6 місяців тому

    Fantastic tutorial, I've been trying for ages to engrave and cut. Excellent video. Thank you

  • @hafizbhuyan4473
    @hafizbhuyan4473 Рік тому

    Great tutorial man, this was super simple and easy to understand and got me ready to go by the time I was done watching. Thank you so much!!!

  • @simionalexandru9546
    @simionalexandru9546 Рік тому

    I love you man , you saved me, I had a deadline until tomorrow and now I am so stress free. hanks for the video !

  • @beefa24
    @beefa24 10 місяців тому

    Thank you so much for this! Really helpful, best one yet ti follow along as you work!

  • @martinzuerner9609
    @martinzuerner9609 6 місяців тому

    Many many 5hanks for explaining the process so clearly. I am going to follow this process and make my first piece ever.

  • @zk_6312
    @zk_6312 Рік тому

    Great video, I was looking for something like this that was easy to understand.

  • @l0v3lifeeXx94
    @l0v3lifeeXx94 4 місяці тому

    This is amazing. Great job man!

  • @jffqnn
    @jffqnn 8 місяців тому

    Thank You for making this Video.
    This is Exactly what I needed to learn in order to create something without having to make a jig and trying to center everything.
    Just used a Laser Engraver for the Very first time Today and I've been watching video after video just so I could learn how to create a simple engraving.
    This is definitely the technique I will be using!!
    Thank You again for Your Time and Help with learning something New!! 🙂

  • @jsnwhite619
    @jsnwhite619 8 місяців тому

    Excellent video! I was ready to sell my rig for a loss out of pure frustration until I found this - thank you!

  • @Steve.Garrison
    @Steve.Garrison Рік тому

    Thanks! I just got my new laser and I'm learning laserGRBL. Guess I will be learning Inkscape too.

  • @agghell224
    @agghell224 Рік тому +1

    Very useful video. Many thanks

  • @85breeze
    @85breeze Рік тому

    Very helpful, Thank you!!

  • @RichieRichChris
    @RichieRichChris Рік тому +1

    This was like THE VIDEO I needed

    • @3dpprofessor
      @3dpprofessor  Рік тому +1

      This was the video I wish someone else had made. But no one else had, so I made it. Glad someone else needed the same.

  • @blackmagic998
    @blackmagic998 5 місяців тому

    Thankyou for such a great video, i just received my laser engraver yesterday and trying to learn everything you just showed.
    I was up most of the night tinkering with 3 different drawing software.
    I used to run cnc lathes and write program codes but im a complete novice to designing for projects like this so im going for free open source software for the moment.
    Lasergrbl and inkscape are the 2 programs ive set on to learn with

  • @kristinego7929
    @kristinego7929 Рік тому

    I just want to make a cake topper for my husband. Thanks for this instruction. I will try it out soon.

  • @rokkosgeneral
    @rokkosgeneral Рік тому

    your voice is so relaxing ... thanks for the useful information too

  • @mrgarypitman
    @mrgarypitman Рік тому

    thanks. got my new machine. so will try some of this out. very helpfull ty

  • @UnicoLtd
    @UnicoLtd 5 місяців тому

    YOU ARE THE MAN!!!

  • @desktopadonis5646
    @desktopadonis5646 Рік тому +1

    Thank you sir

  • @joelrob8606
    @joelrob8606 6 місяців тому

    Bonjour de France 👋👋 et grand MERCI pour votre contribution. 💪💪

    • @3dpprofessor
      @3dpprofessor  6 місяців тому +1

      You're quite welcome, my friend.

  • @adrianajefferson8681
    @adrianajefferson8681 Рік тому

    Thank you thank you thank you so much for this video. I cannot even begin to tell you how long i have been trying to find this video. I got an enjoywood laser and could not for the life of me figure out why my laser wouldn't engravebut istead just simply cut everything. Thank you thank you thank you gain.

  • @mikepalmer1178
    @mikepalmer1178 10 місяців тому

    great video thanks

  • @0R3L1C0
    @0R3L1C0 Рік тому

    Thank you! I was looking through LaserGRBL tutorials trying to find how to setup the separate cuts. No one that I found did this. I came from a sign company and set up the cut files for them but, we used Illustrator and I never worked with the laser software itself.

  • @doughoist
    @doughoist 11 місяців тому +6

    Thank you. I felt my IQ increase.

  • @natecoombes1296
    @natecoombes1296 Рік тому

    God bless you sir...

  • @RestoreTechnique
    @RestoreTechnique Рік тому

    How do I cut a single straight line? I want to cut some things in half. If I vectorize it will cut a 2 dimensional shape, x axis and y axis. If i dont vectorize, it will cut side to side with a big kerf. Currently I have to import a rectangle, vectorize, and stop the burn after it's done the first line.
    Is there a way to just cut a single straight line?

    • @3dpprofessor
      @3dpprofessor  Рік тому +1

      That's an interesting question. Inkscape does have a single line tool. Does that not translate to a single line movement?
      It would be easy enough to edit the GCode by hand. It is (mostly) human readable. just a text file you can open in word and edit.

  • @alfredogarcia4752
    @alfredogarcia4752 10 місяців тому

    Thanks for putting out this video. Illustrator and lightburn on the yearly fees don’t help the newbies.

  • @piotrzloza372
    @piotrzloza372 Рік тому +6

    I'd like to point out two things:
    1. If you delete the outline before exporting to png file, it will take less time to engrave - the laser will go only in the engraving area and skip the rest.
    2. I wouldn't recommend appending those two files (cutting and engraving) if your laser needs more passes to cut the chosen material. I'd suggest engraving first and then opening the svg file to cut.

    • @3dpprofessor
      @3dpprofessor  Рік тому +3

      I like to just fire and forget, but you're right, if you break them into separate files, theoretically they should be able to be run back-to-back, so if that's the way you prefer to do things, you can. You've got options.

    • @HardcoreMusik
      @HardcoreMusik 6 місяців тому

      1. yes but then the text will move to the left side not centered to the svg file. I my case this will not work
      EDIT: My mistake ! You have to export as page size !

    • @piotrzloza372
      @piotrzloza372 6 місяців тому

      @@HardcoreMusik Yes, export as the the whole page. I also set DPI to 300 and then use the same setting (300 DPI) in LaserGRBL - it sets the size automatically.

  • @abusam1
    @abusam1 8 місяців тому

    one of the few clear tutorial incorporate Inkscape and LaserGRBL 👍
    I am trying to engrave a grid on MDF wasteboard for my Ortur LM2 pro 10A as my first project (exercise), when drawing the grid lines on Inkscape, I am not sure if I should set a stroke width (min, max) for the lines.
    Also how would I avoid overlapping burns from crossing VLines over HLines or any other overlapping lines (maybe overlapping 2 circles with no fills).
    would it matter if I group the Hlines and the VLines to get efficient engraving time.

    • @3dpprofessor
      @3dpprofessor  8 місяців тому +1

      The line width in inkscape doesn't change anything with the laser. I tend to set it about 0.4mm, since that's the width that most lasers cut.
      However, as for avoiding overlapping, there really isn't any easy or automatic way to detect and fix that with this tool chain.

  • @eddyhaman8073
    @eddyhaman8073 4 місяці тому

    Terima Kasih (*thank you*)

  • @dixie3461
    @dixie3461 Рік тому

    like your video! Have no clue how far away you place your laser from the wood?

    • @3dpprofessor
      @3dpprofessor  Рік тому

      Every laser has a different answer to this. Check with your manufacturer.

  • @renderuthis
    @renderuthis 10 місяців тому

    I wish it wold move the z to make/burn a wider path to fill thick areas faster, I want to do big jobs and I just realized how slow this will be.

  • @dialysmillet9872
    @dialysmillet9872 Рік тому

    Hi! Thanks soo much for your awesome and well explained video!! I followed the steps you explained and I was able to engrave in my piece of wood. However I have a question, I couldn't cut the key chain and that is what I need to complete my project. Could you help me please? Thanks in advance.

    • @3dpprofessor
      @3dpprofessor  Рік тому

      What laser cutter do you have?
      What settings did you use on the SVG cut lines when you imported them?
      What material were you trying to cut?
      Did it go through the motions trying to cut and just not cut through? Did it make a mark? Or did it not even try to do the cut motions?

    • @dialysmillet9872
      @dialysmillet9872 Рік тому

      ​ @3D Printing Professor, thank you so much for your answer. I have an Sculpfun S9. I followed the video regarding the properties. I am trying to cut in a 3mm balsa wood piece. I think the machine tried to cut and just not cut through, maybe is that I have to do more passes?

    • @3dpprofessor
      @3dpprofessor  Рік тому

      @@dialysmillet9872 More power, less speed, more passes. Play with the settings until it cuts through without being too scorchy.
      Unfortunately I can't help with this because I have no idea what your settings are.
      Good luck.

    • @dialysmillet9872
      @dialysmillet9872 Рік тому

      @@3dpprofessor Thank you for your help!

  • @monte.4444
    @monte.4444 5 місяців тому

    Great tutorial, I am jut starting into laser engraving and just got an older Mercury L-25 machine. Will this program work with my equipment? Any and all help is appreciated.

    • @3dpprofessor
      @3dpprofessor  5 місяців тому

      I've never used that machine. What software do they recommend?

    • @monte.4444
      @monte.4444 5 місяців тому

      @@3dpprofessor they recommend Autocad or Coreldraw. Hpgl is the format.

  • @ballwizz23
    @ballwizz23 Рік тому

    Do any of these software allow you to change the speed and power while an engraving is already running? That was my biggest gripe with Lightburn. And I thought LaserGRBL didn't have this restriction.

    • @3dpprofessor
      @3dpprofessor  Рік тому

      I don't know of anything.
      That's actually a slightly complicated problem. Not insurmountable by any means, but not something that I know of anyone tackling yet.

  • @TorteTS
    @TorteTS 4 місяці тому

    Thanks for sharing. As an alternative is it possible to import the cutting profile as png too an vectorize it within LaserGRBL?

    • @3dpprofessor
      @3dpprofessor  3 місяці тому +1

      I don't think LaserGRBL can vectorize raster images. But, it's free, so load it up, give it a shot, and let me know how it goes.

    • @3dpprofessor
      @3dpprofessor  3 місяці тому +1

      So apparently LaserGRBL does have a vectorize plugin. Give it a shot.

  • @godin8262
    @godin8262 2 місяці тому

    How could I have that image import window to appear? my software have a widow that ask me to create and then it place the image in the workspace from that the workspace never the same size from different image and impossible to move the image on the workspace, there is no where a factory reset to reset thing right. Nice video but useless for me because my software doesn't act same as your.

  • @robertspina4503
    @robertspina4503 Рік тому

    👍

  • @shaefreeman2768
    @shaefreeman2768 Рік тому

    So for different materials you just adjust the output of laser? There is no option to just click metal or wood ect..?

    • @3dpprofessor
      @3dpprofessor  Рік тому

      No, there's no options like that.
      Especially since different machines have different strengths, and even "wood" isn't granular enough. Different woods need different settings.

  • @3dpprofessor
    @3dpprofessor  Рік тому +2

    Of course there is an even better alternative... www.3dpprofessor.com/2022/10/01/how-to-lasergrbl/

    • @moisted
      @moisted 8 місяців тому

      Can you do a video on LightBurn. I actually find it more confusing than Grbl... but I may be the only one.

  • @heathermolsbee5751
    @heathermolsbee5751 10 місяців тому

    Thank you for this great tutorial! Question: What would cause Lasergrbl to not open my SVG file from Inkscape? It opens one file but not the other. Thanks.

    • @3dpprofessor
      @3dpprofessor  10 місяців тому

      Interesting. As I don't have access to the files it's going to be hard to guess. I assume there's something different about one of them.
      Maybe if you jump on my discord and upload the files myself or someone else there could help better.

    • @carlosflamenco6205
      @carlosflamenco6205 5 місяців тому

      If you can read the code and find out if M4 I'f active m4 activates the laser learned that two days ago. Was kinda having same issue

  • @kandemirbil
    @kandemirbil Рік тому

    thank you. i dont know english very well but i uderstand your video , how to use grbl laser.

    • @3dpprofessor
      @3dpprofessor  Рік тому

      Thank you very much. I try, when I'm teaching, to be as easy for non-native-English speakers as possible. I know there's a lot out there.

  • @RailyardProductions
    @RailyardProductions 9 днів тому

    What would cause LserGRBL to slow down and stop when cutting circles?

    • @3dpprofessor
      @3dpprofessor  4 дні тому

      Dunno. Never saw this behavior myself.

  • @Real-Tecnica
    @Real-Tecnica Рік тому

    Just have a Q. I have inkscape, I have adobe illustrator, and photoshop does laser grbl strictly work on vectors? I mean can I just create my work in either photoshop and or illustrator?

    • @3dpprofessor
      @3dpprofessor  Рік тому

      As long as you export to SVG, you should be fine.

  • @JonathonEmsley
    @JonathonEmsley 9 місяців тому

    Gday thanks for your vids but i am stuck. Every time i resize the picture to fit in the keychain it goes blurry i have tried everything and it is ether too small or too big i followed your steps and still cant seem to get it to work. The size of the keychain is W45mm x L27mm that i want to engrave on and the picture i am resizing is W5400px x L2070px can you show what i am doing wrong thanks regards jon.

    • @3dpprofessor
      @3dpprofessor  9 місяців тому

      The image can only work with the resolution it has. It can't add pixels that aren't there. So it blurs them as they get bigger. My recommendation is start with a higher resolution source image, if you can.
      Also, since the laser can only be on or off, it's possible that what you're seeing on screen doesn't really matter much.

  • @Amazing.World.2024
    @Amazing.World.2024 Рік тому

    Why the cut has to be a SVG file? why can I export as JPG as well?

    • @3dpprofessor
      @3dpprofessor  Рік тому +1

      SVG allows for vector data which describes the direction of a line, where jpg only allows for raster data which can be interpreted like a dot matrix printer, but with only one dot.
      In this project we use both raster and vector data, but instead of JPG we use PNG because it's non-lossy. JPG doesn't do hard edges very well.

    • @Amazing.World.2024
      @Amazing.World.2024 Рік тому

      @3D Printing Professor thank you so much for your answer I wanted to ask you another question I would like the laser to go around the Border a second time? While engraving the words will be one time around but the Border will be two or three times around how do I do that

    • @Amazing.World.2024
      @Amazing.World.2024 Рік тому

      I just figured one solution where I import the frame two or three times as many times as I wanted to repeat itself

    • @3dpprofessor
      @3dpprofessor  Рік тому

      @@Amazing.World.2024 Yeah, LaserGRBL doesn't seem to have a "passes" option, so you're left with either importing multiples of your lines to do multiple passes or exporting the lines and raster in separate files and running them one after the other.

  • @lawofficesofjeffreym.jacob9466
    @lawofficesofjeffreym.jacob9466 4 місяці тому

    Great video.
    Once you know what you're doing, lasergrbl is easy. He says as he redoes it because he did it wrong.

    • @3dpprofessor
      @3dpprofessor  4 місяці тому

      Well, that part of LaserGRBL could definitely stand some improvement.

  • @jessicamccabe4958
    @jessicamccabe4958 2 місяці тому

    I don't understand how you got the yellow rim around your circle.. it's not doing that on mine so when I try and remove the fill there is nothing there..

    • @3dpprofessor
      @3dpprofessor  2 місяці тому

      I chose the color when I made the file in inkscape. You can make the lines whatever color you want.

  • @cornelius6599
    @cornelius6599 9 місяців тому

    How does it work if you take a picture of something and want to cut the border line is giving me trouble

    • @3dpprofessor
      @3dpprofessor  9 місяців тому

      General pictures probably won't work, but I'm guessing you're talking about a logo or text or something that's generally black and white.
      Inkscape has the ability to trace a raster image and create a vector from it. That may be what you're looking for.

  • @remad1777
    @remad1777 2 місяці тому

    The centreing and framing buttons are grey in laserGRBL even when successfully connected to my atomstack. I have just set it up for the first time. Does anyone know why this might be?

  • @stcheryl77
    @stcheryl77 Рік тому

    Mine when I do this doesn't have the outline and I can't figure out why

    • @3dpprofessor
      @3dpprofessor  Рік тому

      In inkscape? Possible your stroke settings are set to a zero weight stroke. See if you can change that in the Stroke settings menu.

  • @matthewt3020
    @matthewt3020 Рік тому +1

    i was totally with you up until the export file part. My file drop down menu doesnt say export png image, there is only export. when i click export it brings up a totally different menu than what you are showing & I cant change my image in the same way you are :(

    • @3dpprofessor
      @3dpprofessor  Рік тому

      Huh, I wonder if I'm on an old version of Inkscape.
      If you press Shift+Ctrl+E does it bring up the export PNG Image menu in the right sidebar?

    • @patrunkle3420
      @patrunkle3420 Рік тому

      @@3dpprofessor The same happened to me. I follow it exactly, but certain things don't show like they do on yours. I cannot figure out how to engrave and cut. When i import the egg, then the words, it does not line up on grbl. the words want to sit on the bottom line instead of centered in the egg.

  • @daveewin8399
    @daveewin8399 4 місяці тому

    hi i am trying to form a ellipse after selecting the ellipse icon can only draw boxes any one know why thanks

    • @3dpprofessor
      @3dpprofessor  4 місяці тому

      In inkscape? No idea. Never seen that before.

  • @edwinatencio
    @edwinatencio 4 місяці тому

    I am unable to align the circle with the text, I am absolutely new to this and I got confused when you went back to correct the alignment

    • @3dpprofessor
      @3dpprofessor  4 місяці тому

      The new version of Inkscape changed a few things. But if you can't find the alignment tools, just move them around by hand until they look right. Close is usually close enough.

  • @MrJaxparadize
    @MrJaxparadize Рік тому

    The options of with and height on the program aren’t there, only start and stop.

    • @3dpprofessor
      @3dpprofessor  Рік тому

      That is correct. Many cheap lasers like this you put the corner of your project at 0,0 and then place the head manually and the project starts from wherever you put the head. That way you can, without having to create a new project file, cut in different parts of the same material.
      Many of these lasers don't even have limit switches. They have no way of telling where you've put them.

  • @waltperko8389
    @waltperko8389 9 місяців тому

    What IF I have a .DXF file and want an exact laser cut of the image?

    • @3dpprofessor
      @3dpprofessor  9 місяців тому

      You may have to convert to an SVG, but it should work.

    • @waltperko8389
      @waltperko8389 9 місяців тому

      @@3dpprofessor Hi, I tried that, but still the program is not cutting the exactness as my neje laser software does with a .DXF file. I wish I could use the neje software on my new AtomStack X20 130W laser.

    • @3dpprofessor
      @3dpprofessor  9 місяців тому

      @@waltperko8389 what do you mean by "exactness"? Are you taking into account the cutting width?

  • @nickparker6944
    @nickparker6944 4 місяці тому

    😁

  • @Michael-bc2op
    @Michael-bc2op 5 місяців тому

    why you saved cutting as svg and not pgn?

    • @3dpprofessor
      @3dpprofessor  4 місяці тому +1

      Eithers a good option, but SVG can have raster data in it, so why not?

    • @Michael-bc2op
      @Michael-bc2op 4 місяці тому

      @@3dpprofessor thanks that vid was a big help to projects

  • @pethuds
    @pethuds Рік тому

    I think I must be doing something wrong. I can't get the the key fob to cut out it just engraves same as text what have missed

    • @3dpprofessor
      @3dpprofessor  Рік тому

      What laser cutter are you using?

    • @pethuds
      @pethuds Рік тому

      A 5.5w on a 3018 pro

    • @3dpprofessor
      @3dpprofessor  Рік тому

      Is it going through the motions to cut but it's only engraving?
      5.5w is kinda underpowered. Anything thicker than paper or denser than cardboard it probably can't cut though, no matter how hot or slow you go. But you can still get smooth engravings by using vector movement.

  • @Megan-yg1jn
    @Megan-yg1jn 10 місяців тому

    I have a Latitool engraver. I set it up and downloaded LaserGRBL. I tried the test files. The only test file that fires the laser and moves the laser is the depth one. Nothing else I've tried will fire the laser or move it more than an inch in a square. There is nothing in the configuration button when I click on it. Any ideas on how to get this to work?

    • @3dpprofessor
      @3dpprofessor  10 місяців тому

      Contact the manufacturer. If they sent you a machine that doesn't work, get your money back, I say.

  • @funnygags312
    @funnygags312 Місяць тому

    Why cardboard burn while cutting?

    • @3dpprofessor
      @3dpprofessor  Місяць тому

      You're cutting it with fire, so... burn is possible.

  • @waterlilly62lori
    @waterlilly62lori 4 місяці тому

    I'm brand new to this and you used some terminology I'm unfamiliar with😢. Is there another video for beginners?

  • @Ali_Al_Saachez
    @Ali_Al_Saachez Рік тому

    I’m having trouble even opening any of the PNGs of text that I save. Help me out if you got a second

    • @3dpprofessor
      @3dpprofessor  Рік тому

      Have you tried opening the PNG in another program? If you don't export them properly, they might be empty. Make sure your export settings are for the whole thing.

  • @abramklassen3869
    @abramklassen3869 5 місяців тому

    Why can I open my folders

    • @3dpprofessor
      @3dpprofessor  5 місяців тому

      Because that what folders do?
      I'm not sure what you're asking.

  • @waltperko8389
    @waltperko8389 9 місяців тому

    You are skipping over important pieces of the demo like what happens with the image when you click "Vertical"?

    • @3dpprofessor
      @3dpprofessor  9 місяців тому

      Give it a shot and let me know how it goes.
      That just defines the direction the laser moves when it does the rastering.

  • @Linus-rr6ns
    @Linus-rr6ns Рік тому

    your voice reminds me of Technoblade

  • @johnrisher3007
    @johnrisher3007 Рік тому

    Radio voice

  • @alyssawbircher
    @alyssawbircher Рік тому

    Very helpful! Thank you