Literally am finishing up one of these I doubt it will be of use to you now but the facade over the shifter on the center console pops out and give you access to 6 10mm retaining bolts for the c clip and shift boot assembly (= happy wrenching
Thanks for this!! Taking the gearbox out of a 2007 exact same issue with manual shift lever. There is a weight just above the top cover you removed stopping the full shift lever pulling out. Your fix helped get around this Thanks for the vid!!
centre console should be removed.10mm bolts in centre pocket/middle glove box(.Circlip on gear shifter with Spring.remove.ring of 10mm bolts holding metal plate.makes removing gear Shifter,done loads of 4 wheel drive kia's this way.17mm bolts at the top of bell housing can be a pig sometimes the rest is natural mechanics.take your time 2 to 3 hours should cover the job.Darren
+ajacko “bsureofurfacts” son Usually when you hear noises coming from the throw out bearing, or you step on the gas and the engine rpms increase but your car does not speed up.
The shifter issue was exactly what I was looking for a solution on. Thanks for nailing it!
Literally am finishing up one of these I doubt it will be of use to you now but the facade over the shifter on the center console pops out and give you access to 6 10mm retaining bolts for the c clip and shift boot assembly (= happy wrenching
Thanks for this!! Taking the gearbox out of a 2007 exact same issue with manual shift lever. There is a weight just above the top cover you removed stopping the full shift lever pulling out. Your fix helped get around this Thanks for the vid!!
Hi man, I see that your post was written long time ago but.. could you clarify what does it mean that there is a weight above top cover?
Have a video how you taken out ???
Could you clarify what was the problem with pulling the shifter out through the center console? I don't get that. It looks easy on the diagrams.
Thank you your going to save a ton of time
centre console should be removed.10mm bolts in centre pocket/middle glove box(.Circlip on gear shifter with Spring.remove.ring of 10mm bolts holding metal plate.makes removing gear Shifter,done loads of 4 wheel drive kia's this way.17mm bolts at the top of bell housing can be a pig sometimes the rest is natural mechanics.take your time 2 to 3 hours should cover the job.Darren
Can you please clarify why you needed to replace the clutch and what the symptoms were?
+ajacko “bsureofurfacts” son Usually when you hear noises coming from the throw out bearing, or you step on the gas and the engine rpms increase but your car does not speed up.
I watched the video but in the video you never say to remove the radiator from the car to get to the transmission bults in the engine side of the kia.
What is the average price for new clutch on 06 sorento?? Do u recommend new or used replacement??
Jerry Hesson I always go new and get the clutch kit
Just got mine for 320.00 at advanced auto
Hi there is this 4wd ?
Thank you very much !
thanks...