H Beam Welding Machine Part1

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ •

  • @straightener2001
    @straightener2001 6 років тому +7

    I welded for 33 years, 24 ASME certifications, 12 AWS certifications. If my welds looked like that I would have been shown the door. Welding is an art and a science and every day more knowledge is lost due to people like me retiring.

    • @bruisedorange5576
      @bruisedorange5576 5 років тому

      Yeah, no kidding. That short tack weld at the very end of the video looked terrible. They better be grinding that shit off before laying down the first pass.

    • @Cerberus984
      @Cerberus984 5 років тому

      @@bruisedorange5576 Have you ever heard about the Chinese California bridge debacle? Worth the read on an article titled, "California’s Chinese Steel Crack-Up" easily found on a google search hosted on site named mygovcost.

    • @sameeragrawal9537
      @sameeragrawal9537 4 роки тому

      Pl. call 9325222532

    • @jonathan.jaques5785
      @jonathan.jaques5785 4 роки тому

      Grind out a tac before the first pass haha ok then.

  • @manisankar4063
    @manisankar4063 4 роки тому

    Which countries

  • @rossijohn1408
    @rossijohn1408 11 років тому +1

    Great video, didn't get a good look at the welds though!

  • @akashsahani7857
    @akashsahani7857 5 місяців тому

    Wedding ka history kaise check karte hai bhaiya machine me

  • @terryakuna66
    @terryakuna66 5 років тому

    Whats the difference between an I beam and an H beam ... the direction it stands?

    • @MrSunrise-
      @MrSunrise- 5 років тому

      ratio of web to flange width.

    • @matttiller4777
      @matttiller4777 4 роки тому

      Those are clearly I beams. Well I guess you could call them that. How one could trust this over extruded beam I would never understand

  • @robertchea1086
    @robertchea1086 8 років тому

    What is your maximum welding speed>?

  • @jdw329
    @jdw329 6 років тому

    I cant believe building an i beam or wide flange is cheaper or better than forgeing one or is there another reason for this

    • @MrSunrise-
      @MrSunrise- 5 років тому +1

      Wild-assed guess here, but this looks like a ship yard. They are probably building non-standard sections on short notice.

  • @maricelserrano1667
    @maricelserrano1667 3 роки тому

    Not clear how to use your machine and how to weld

  • @billwelter4101
    @billwelter4101 5 років тому

    With slag like that, must be stick welding.... that's a pretty long weld. Is the machine fed a long rod with flux, or on a roll?

    • @099stick
      @099stick 5 років тому

      its submerged arc welding flux is coated on the part and a wire is fed through to the base material

  • @چاچاجی-ح9ح
    @چاچاجی-ح9ح 4 роки тому

    what is this???

  • @submergedarcwelding-ln6rw
    @submergedarcwelding-ln6rw 11 місяців тому

    Our factory specializes in manufacturing submerged arc welding agent for 30 years, win-win cooperation.

  • @frankanddanasnyder3272
    @frankanddanasnyder3272 6 років тому +12

    Camera work made me sea sick....

  • @Accumulator1
    @Accumulator1 4 роки тому +1

    Maybe they could speed things up a bit by having a China man laying underneath welding up the bottom at the same time.

  • @donburke4886
    @donburke4886 4 роки тому

    Very poor camera work..Stay still for at least a second so we can see the welds

  • @steelem422
    @steelem422 5 років тому +1

    It feels like a horror movie they was it is filmed it’s great !

  • @बादलकुमार-ठ9द

    अरे भाई साहब एक काम कहां पर होता है

  • @santoshkumar12348
    @santoshkumar12348 9 років тому

    very good quality weld, speed of operation is also high, it will consumes less electricity and gives full penetration of welds

    • @tmtan1303
      @tmtan1303 9 років тому

      +Santosh Kumar No bevelling and gap, can it be penetrated Sir?

  • @williamhuang5329
    @williamhuang5329 2 роки тому

    Hanzhen harmonic drive gear , over 30 years experience , robot joint , strain wave reducer,

  • @jjosephm7539
    @jjosephm7539 5 років тому

    My grandfather rolled these wide flanged, 12 and 18 inches, in Bethlehem.

  • @mahimondal6921
    @mahimondal6921 4 роки тому

    Very nice job mereko milega

  • @zhouxiangmachines4181
    @zhouxiangmachines4181 6 років тому +2

    If interested in H beam machine or production line. Contact www.cutting-welding.com

  • @adammeyer8204
    @adammeyer8204 4 роки тому

    That job would suck, watching a welding machine weld all day and listen to that loud ass buzzing.

  • @eloyserrato8672
    @eloyserrato8672 5 років тому +1

    I call that an ibeam

  • @muhammadsaif2739
    @muhammadsaif2739 5 років тому

    This isn't an H beam this is a girder plate

  • @maheshkadam4814
    @maheshkadam4814 10 років тому

    AS PER SEEN THE VIDEO ACTUAL WELDING AMPS ARE NOT MAINTAIN PROPERLY-BY OPERATORS THAT WHY WELDING THK & FLANGE WAVINESS BECAME MOSTLY

  • @markramkhelawan1580
    @markramkhelawan1580 6 років тому +2

    Looks like a high quality Chinese operation! Lol.😉

  • @mw3gamer23
    @mw3gamer23 4 роки тому

    Thats a quiet shop no hammering, random cussing, some guy hitting steel with a 2 lb hammer... shit

  • @zeinmuhammad1992
    @zeinmuhammad1992 6 років тому

    good job

  • @fredrickmuhsin8141
    @fredrickmuhsin8141 3 роки тому

    السلام عليكم

  • @nasiruddinqamruddinshaikh7986
    @nasiruddinqamruddinshaikh7986 2 роки тому

    Camera rok kar video banate to achcha hota.kuch bhi sahi se dikhai nahi diya..

  • @ameehasa5504
    @ameehasa5504 9 років тому

    Your video just to show us the steel it's not clear just moving no have any technician

  • @NavneetKumar-kl4hj
    @NavneetKumar-kl4hj 4 роки тому

    Sir i am ptw mchine opretor i need out of contry job work my contry is india

  • @dubaistatus1476
    @dubaistatus1476 2 роки тому

    I'm opening

  • @davidrichards8639
    @davidrichards8639 10 років тому +1

    Nothing new with this, they have been welding RSJ beam sections with Submerged arc for 60 years as I know.

  • @krammohan4290
    @krammohan4290 5 років тому

    Hi

  • @zabysherzy661
    @zabysherzy661 5 років тому

    home made video

  • @domingo59
    @domingo59 4 роки тому

    Who is the stupid camera man? Slow down!!