you are the first and only Guy to put up a video taking apart this area of the Gun ,, love it,, although I have no experience with the .177 Cal I do have the .30 ,, This had been my findings on it ,,,Gun would NOT fill with air,, sent from factory empty (0 Pressure) which is what the manual says is normal, I could not get gun to fill, leaked as fast as I put the air in (Via GX CS3) and Hand pump attempts LOL,, so I sent the gun back, next one did the same thing, so I took it apart and put a micro amount of liquid Thread seal on the very tip of the Air valve needle then reassembled and voilà. I was able to fill with my baby compressor :) Also the gun comes with the dirtiest grease I have ever seen , so while I had it apart I removed and cleaned all moving parts and lightly re Oiled with a (air chamber lube) I know not intended use lol but nice consistency , (no more gritty sounding action) gun has performed flawlessly for over 1500 rounds at this point with a dissemble and re-clean + few dry cloth barrel pull throughs at around 500 rounds ,, on the Note of Ammunition I have found that JSB Diablos are a much cleaner round compared to the Votex ones in .30 Cal
Thanks For the great videos! So far I have really enjoyed my a Blitz in .30 cal. I wish there were more tuning options, but the full auto feature is really fun.
Big thanks to Erick! I own both the .25 & .30 Blitz. This video (both parts 1 and 2) are an invaluable resource for the Blitz community. Looking forward to more from you. Subscribed (with a bell!!).
I have a 22 blitz, a 25 blitz and a .30 blitz. I can say that the ONLY one that is dependable is the .30 cal. My .22 has gone back to HATSAN-USA 6 times for warranty repair in 4 months and my .25 has gone back 3 times in 4 months. My .30 has more than 12,000 rounds through it and it has never failed. The .30 Cal has same kind of magic that the lower calibers are just missing! The .22 blitz is a total disaster I have to say!!!!!!!!!
I have the .30 cal and have shoot about 1000 rounds or so. Half on full auto. No problems at all. I would love to have a little more power, but "if it ain't broke don't fix it" keeps going through my head...
The sortie is identical for the adjustment. One thing I would recommend is lube it all up while apart. Use plenty of lube on the spring surfaces to avoid it getting twisted up when you adjust it because it needs to be able to slip on the 2 surfaces when being compressed. You can use alternate lube here versus silicon since compressed air does not contact the hammer spring. Also keep in mind there are better springs available. If you measure the spring you can order some heavier duty better quality springs for the job. I did this for my sortie after adjusting the stock spring it stayed compressed. Cheap materials from Hatsan.
Hi Eric. Thanks to your videos. I have been able to successfully adjust the hammer spring tension. I have done it several times and and totally comfortable. I will next open the other side and grease the whole inside with moly grease. My .25 cal fires well on semi but only fires auto under 100 bar. Im looking for the sweet spot for full auto over 250 bar. I had a question for you. Would'nt we get the same hammer spring adjustment affect if we just adjust the big screw that holds in the spring? This way the door does not have to be open when adjusting. I have not tried it yet. I wanted to know your opinion first. Also are there any adjustments that can be made between the hammer and the pcp bottle? Thanks again for your videos.
I just bought one(build date 10-2020 and have shot about 300 rounds with it, not a single problem, and the cocking of the hammer after a new magazine is inserted is quite heavy, so perhaps the factory has already tuned the latest guns.
@@deepmaze1 Nope but did shoot some more, like a 100 jsb's more. Not a single problem. The power is ok but not that great. I also have a Hatsan Hercules .356 that thing has some crazy power.
If you take the gun apart and replace ALL the grease with synthetic motor oil, hand rubbed on the parts, it runs perfectly. All my parts were massaged with Royal Purple 10w40 and the O-rings were massaged with Oatey 90% Silicone grease #30219.
thank you -trying to get that right side cover off and those screws are toast before even getting them to budge -might have to get creative and then find some decent replacements -I am sure I am not the only one by judging how easily they striped -the rest look ok
@@deaczorz Plus, they use thread locker on them as anti tampering. I rounded the top middle cover screw on the left side cover on my first day even using a JIS screwdriver. I plan on helicoiling and upgrading all of them to higher quality screws. Try heating the area up to soften the thread locking compound.
Every thing I've been hearing about the Blitz is its it's a big disaster. I ordered one before I learned about all the issues. So I'm selling it before I ever even try it because if I have to send it back with in the first 30 days I'll cut it up with a saw saw and send it back. So instead I'd prefer to just sell it.
I just received my .30 and it won't shoot more than 1 shot -I have to cock it every round -so would more tension on the spring fix it ? I have to literally push the bolt forward ( and no not a magazine issue )
MERCI BUT SO WE TURN EARLY OR ANTI EARLY FOR MORE POWER BECAUSE AT ONE TIME YOU SAY TURN EARLY FOR MORE STRENGTH AND AFTER ANTI EARLY FOR MORE GAS, STEPH DE FRANCE
Well done thank you. My 22 caliber blitz is supposed to be here next week. How would I know what series it is? First production? second production? third production??? does anybody know how many times they have updated this gun model?
Good luck. My .22 goes back to Hatsan about every 30 days. Send your.22 back for a refund ASAP and get the .30 cal. The .30 is very dependable, everyone agrees!!!
I ordered the .22 blitz about a month ago and I haven’t had any problems after 1,000 shots and half of them on full auto amazingly accurate I love mine so far anyway
@@JustinEthnostate Mag mod and power mod made it reliable. 24 pellets in a rapid burst is funny. I really love to shoot heavy 1.3 gramm bullets. Very satisfying sound. In overall, it is not perfect (yet), but OK for now.
Receiver of this air gun does not allow you any significant tuning. Moreover, it can crack. Therefore valve modification is questionable. And longer barrel gives no advantages on air guns (longer than 55cm).
can you please tell me the exact specification on hammer spring? Mine literally snapped and I can't find out any information to replace it. PLEASE HELP! Hatsan is useless
I dont have a blitz but i would get on line for coil springs measure the lenth and width and try to find one that way and id go longer by 1 eighth or a quarter of a inch or go to a speed shop auto to see what they have
You will not be able to turn more than 4 rotations. I have tuned till I could not perform the loading cause of the spring tension. then I have returned 1 turn back
@@deepmaze1 They sure haven't changed any marketing materials! I never do an entire mag dump it's kind of pointless. It has a nice 2-3 pellet burst with a quick squeeze. Perfection.
you are the first and only Guy to put up a video taking apart this area of the Gun ,, love it,, although I have no experience with the .177 Cal I do have the .30 ,, This had been my findings on it ,,,Gun would NOT fill with air,, sent from factory empty (0 Pressure) which is what the manual says is normal, I could not get gun to fill, leaked as fast as I put the air in (Via GX CS3) and Hand pump attempts LOL,, so I sent the gun back, next one did the same thing, so I took it apart and put a micro amount of liquid Thread seal on the very tip of the Air valve needle then reassembled and voilà. I was able to fill with my baby compressor :)
Also the gun comes with the dirtiest grease I have ever seen , so while I had it apart I removed and cleaned all moving parts and lightly re Oiled with a (air chamber lube) I know not intended use lol but nice consistency , (no more gritty sounding action) gun has performed flawlessly for over 1500 rounds at this point with a dissemble and re-clean + few dry cloth barrel pull throughs at around 500 rounds ,, on the Note of Ammunition I have found that JSB Diablos are a much cleaner round compared to the Votex ones in .30 Cal
Thanks For the great videos! So far I have really enjoyed my a Blitz in .30 cal. I wish there were more tuning options, but the full auto feature is really fun.
Still enjoying your .30?
Absolutely. No problems...just lots of fun and empty pellet tins.
Big thanks to Erick! I own both the .25 & .30 Blitz. This video (both parts 1 and 2) are an invaluable resource for the Blitz community. Looking forward to more from you. Subscribed (with a bell!!).
I realize it's pretty randomly asking but do anybody know of a good website to watch new movies online?
@Kamden Gianni Flixportal
@Larry Elisha Thank you, I signed up and it seems to work :D Appreciate it !
@Kamden Gianni Glad I could help xD
I have a 22 blitz, a 25 blitz and a .30 blitz. I can say that the ONLY one that is dependable is the .30 cal. My .22 has gone back to HATSAN-USA 6 times for warranty repair in 4 months and my .25 has gone back 3 times in 4 months. My .30 has more than 12,000 rounds through it and it has never failed. The .30 Cal has same kind of magic that the lower calibers are just missing! The .22 blitz is a total disaster I have to say!!!!!!!!!
Thanks, the best I've seen for this procedure.
I have the .30 cal and have shoot about 1000 rounds or so. Half on full auto. No problems at all. I would love to have a little more power, but "if it ain't broke don't fix it" keeps going through my head...
The sortie is identical for the adjustment. One thing I would recommend is lube it all up while apart. Use plenty of lube on the spring surfaces to avoid it getting twisted up when you adjust it because it needs to be able to slip on the 2 surfaces when being compressed. You can use alternate lube here versus silicon since compressed air does not contact the hammer spring. Also keep in mind there are better springs available. If you measure the spring you can order some heavier duty better quality springs for the job. I did this for my sortie after adjusting the stock spring it stayed compressed. Cheap materials from Hatsan.
Hi Eric. Thanks to your videos. I have been able to successfully adjust the hammer spring tension. I have done it several times and and totally comfortable. I will next open the other side and grease the whole inside with moly grease. My .25 cal fires well on semi but only fires auto under 100 bar. Im looking for the sweet spot for full auto over 250 bar.
I had a question for you. Would'nt we get the same hammer spring adjustment affect if we just adjust the big screw that holds in the spring? This way the door does not have to be open when adjusting. I have not tried it yet. I wanted to know your opinion first. Also are there any adjustments that can be made between the hammer and the pcp bottle? Thanks again for your videos.
Magazine rotation is not fast enough. Please check this video for detailed modification (starts at 6:32)
ua-cam.com/video/FUyICcRKtqM/v-deo.html
I'm kinda scared to mess with the rifle like this but the .30 needs more power
I just bought one(build date 10-2020 and have shot about 300 rounds with it, not a single problem, and the cocking of the hammer after a new magazine is inserted is quite heavy, so perhaps the factory has already tuned the latest guns.
Looks like they did. Did you try the magazine spring mod and the heaviest projectiles? I want to know the top power of this rifle))))
@@deepmaze1 Nope but did shoot some more, like a 100 jsb's more. Not a single problem. The power is ok but not that great. I also have a Hatsan Hercules .356 that thing has some crazy power.
Do you think the invader would have a similar power adjustment procedure? -951-
Never touched that rifle so i do not know the internal structure.
If you take the gun apart and replace ALL the grease with synthetic motor oil, hand rubbed on the parts, it runs perfectly. All my parts were massaged with Royal Purple 10w40 and the O-rings were massaged with Oatey 90% Silicone grease #30219.
thank you -trying to get that right side cover off and those screws are toast before even getting them to budge -might have to get creative and then find some decent replacements -I am sure I am not the only one by judging how easily they striped -the rest look ok
@@blackimaje yea those screws are soft as butter
@@deaczorz Plus, they use thread locker on them as anti tampering. I rounded the top middle cover screw on the left side cover on my first day even using a JIS screwdriver. I plan on helicoiling and upgrading all of them to higher quality screws. Try heating the area up to soften the thread locking compound.
Every thing I've been hearing about the Blitz is its it's a big disaster. I ordered one before I learned about all the issues. So I'm selling it before I ever even try it because if I have to send it back with in the first 30 days I'll cut it up with a saw saw and send it back. So instead I'd prefer to just sell it.
I just received my .30 and it won't shoot more than 1 shot -I have to cock it every round -so would more tension on the spring fix it ? I have to literally push the bolt forward ( and no not a magazine issue )
See my recent comment. Easy fix.
MERCI BUT SO WE TURN EARLY OR ANTI EARLY FOR MORE POWER BECAUSE AT ONE TIME YOU SAY TURN EARLY FOR MORE STRENGTH AND AFTER ANTI EARLY FOR MORE GAS, STEPH DE FRANCE
Great Videos ! i have quick ? Did you empty the airtank?
Nope. The tank was under 150BARs of pressure
Well done thank you. My 22 caliber blitz is supposed to be here next week. How would I know what series it is? First production? second production? third production??? does anybody know how many times they have updated this gun model?
I know about two gens. 2nd gen is available in the US only.
Good luck. My .22 goes back to Hatsan about every 30 days. Send your.22 back for a refund ASAP and get the .30 cal. The .30 is very dependable, everyone agrees!!!
@@johnslugger whats wrong whit the 22 cal, so if you dont shoot full auto only rarely will it still break on semi auto?
I ordered the .22 blitz about a month ago and I haven’t had any problems after 1,000 shots and half of them on full auto amazingly accurate I love mine so far anyway
Thank for the video! :) How You take out the air from the bottle safety?
Unfortunately - You have no mechanism to do this. So you need to check that you do not have pellets in the bore, and be very CAREFULL
@@deepmaze1 There is a degassing screw next to the gauge!
@@JustinEthnostate AAAh! That what it was ))
@@deepmaze1 How's she shooting? I love my .30
@@JustinEthnostate Mag mod and power mod made it reliable. 24 pellets in a rapid burst is funny. I really love to shoot heavy 1.3 gramm bullets. Very satisfying sound. In overall, it is not perfect (yet), but OK for now.
Hello .can we swap the barrels of different calibre (from .30 to .22 or .30 to .25 etc .) on these guns?
Unfortunately, I do not know. We have only one caliber allowed in Ukraine - 4.5mm.
Please advise some good oil/grease for hatsan blitz. Thank you.
bearing grease would work just fine. Do not use lithium grease
@@deepmaze1 thank you.
is it possible to put a longer barrel on the bltz, or a higher efficency valve? (eddit) i do not know much about airguns or tuning them
Receiver of this air gun does not allow you any significant tuning. Moreover, it can crack. Therefore valve modification is questionable. And longer barrel gives no advantages on air guns (longer than 55cm).
@@deepmaze1 alright that explains a lot. Thank you
can you please tell me the exact specification on hammer spring? Mine literally snapped and I can't find out any information to replace it. PLEASE HELP! Hatsan is useless
I dont have a blitz but i would get on line for coil springs measure the lenth and width and try to find one that way and id go longer by 1 eighth or a quarter of a inch or go to a speed shop auto to see what they have
please ask how many times you need to turn the key to reach the power of the full auto, thankx...
You will not be able to turn more than 4 rotations. I have tuned till I could not perform the loading cause of the spring tension. then I have returned 1 turn back
@@deepmaze1 thank you very much for the valuable advice.
wdym @6:36 "the renewed mechanism of auto-fire which is not recommended by hatsan any more"?
YEap! Still not recommended ))))
@@deepmaze1 They sure haven't changed any marketing materials! I never do an entire mag dump it's kind of pointless. It has a nice 2-3 pellet burst with a quick squeeze. Perfection.