Hi I have followed your video and I am converting mine to auto focus. All gone well apart from the following. A. How to reverse bed direction. B. When I set steppers to12000 and then. Set focus it changes to 144 and steppers grind ...
I Need Help! I started my upgrade process the was taken down with Liver cancer for about 8 months. I'm now coming back to the upgrade process at a point where I should be able to begin the auto focus calibration. By the way your Video is the best ! So here are my dilemmas: 1. My Z axis position counter goes down when it heading towards the bottom of the laser and goes up when the platen is moving vertically up (I assume that's backwards isn't it?) How do I correct that in the wiring or in the Logic control? 2. I do not know how to reset the Z axis so it reads correctly . the Axis reset function keeps bottoming out and gets stuck which may be related to the other problems. 3 . one more thing I rewired the stop sensors so thr z+ is on the bottom and Z- is on the top thats correct isn't ? Thank you a ton for all your good work!
I was looking a doing the same to mine along with the new controller. I see you made a 3D printed adapter mount to accommodate the extra width of the controller. It looks good, I was going to do the same to mine. Did you use the same angle as the front face or put it at 45deg angle?
my 86bhh76-400b-35j step motor has only 4 wires. red/blue/yellow/green. is A+ blue/ a- red / B+yellow b- green? would that be correct wiring for my driver? Thank you
Hello,
Could you tell me how l cam make the Y and U axis feed synchronously?
Hi I have followed your video and I am converting mine to auto focus. All gone well apart from the following.
A. How to reverse bed direction.
B. When I set steppers to12000 and then. Set focus it changes to 144 and steppers grind ...
I Need Help! I started my upgrade process the was taken down with Liver cancer for about 8 months. I'm now coming back to the upgrade process at a point where I should be able to begin the auto focus calibration. By the way your Video is the best ! So here are my dilemmas:
1. My Z axis position counter goes down when it heading towards the bottom of the laser and goes up when the platen is moving vertically up (I assume that's backwards isn't it?) How do I correct that in the wiring or in the Logic control?
2. I do not know how to reset the Z axis so it reads correctly . the Axis reset function keeps bottoming out and gets stuck which may be related to the other problems.
3 . one more thing I rewired the stop sensors so thr z+ is on the bottom and Z- is on the top thats correct isn't ?
Thank you a ton for all your good work!
I was looking a doing the same to mine along with the new controller. I see you made a 3D printed adapter mount to accommodate the extra width of the controller. It looks good, I was going to do the same to mine. Did you use the same angle as the front face or put it at 45deg angle?
I have a laser that wont move back down from the probe even with z offset dialled in, can you help please
my 86bhh76-400b-35j step motor has only 4 wires. red/blue/yellow/green. is A+ blue/ a- red / B+yellow b- green? would that be correct wiring for my driver? Thank you
i guess I'm pretty off topic but do anyone know of a good place to stream newly released tv shows online?
@Abel Casey flixportal xD
@Kane Dillon Thank you, signed up and it seems like they got a lot of movies there :) I really appreciate it !
@Abel Casey Happy to help =)