Розмір відео: 1280 X 720853 X 480640 X 360
Показувати елементи керування програвачем
Автоматичне відтворення
Автоповтор
Nice machine for the small it's really cool..
for keeping i think, to nice!
I have the same mill, I comand it todo a tool change it will slide the table out of the way and then nothing happens it stops there, any ideas?
Does it have the original controll, or mach3
How is the tool change programmed. Where is the script! In what language and how do you call it? Thanks!
it is programmed within mach3. just call the tools with standard Gcode M6
tantancnc what programming language is used? A video on that would be great! I haven’t found any content on this topic on UA-cam. Thanks!
@@tantancnc Best regard.What hardware items or components are needed?
@@jaimevillada9150 hi i used cslabs
Could You show us the scrip , imantada to do the same in a lathe
Very nice.. Except tools seem to be jumpy.. ;-)
Tool Change Macro, Nice work i'm working on the same idea, is the macro available?? Best Gerrit
Hi, I hope you can share the document. I'm having the project as you. I need help from you. How Can I contact you? Thank you. I hope your feedback.
Hi, the machine is sold years ago, and is destroyed by a fire. So nothing is left from that
Hello sir I have this machine.can you give me the circuit and software configuration and macro.pls
Hi, the machine is sold long time ago
Price this machine
Very cool!Thanks for sharing.
Nice small mill, for keeping or selling?
PRICE THIS MACHINE
But hows it clean the chips off for tool change?
that is not implemented by denford
Nice ...
great job
Is that the standard Denford spindle?
yes, spindle is standard, i changed the main motor for a delta drive
@@tantancnc is that 30 or 35 size please ?
Nice machine for the small it's really cool..
for keeping i think, to nice!
I have the same mill, I comand it todo a tool change it will slide the table out of the way and then nothing happens it stops there, any ideas?
Does it have the original controll, or mach3
How is the tool change programmed. Where is the script! In what language and how do you call it? Thanks!
it is programmed within mach3. just call the tools with standard Gcode M6
tantancnc what programming language is used? A video on that would be great! I haven’t found any content on this topic on UA-cam. Thanks!
@@tantancnc Best regard.
What hardware items or components are needed?
@@jaimevillada9150 hi i used cslabs
Could You show us the scrip , imantada to do the same in a lathe
Very nice.. Except tools seem to be jumpy.. ;-)
Tool Change Macro, Nice work i'm working on the same idea, is the macro available?? Best Gerrit
Hi, I hope you can share the document. I'm having the project as you. I need help from you. How Can I contact you? Thank you. I hope your feedback.
Hi, the machine is sold years ago, and is destroyed by a fire. So nothing is left from that
Hello sir
I have this machine.can you give me the circuit and software configuration and macro.pls
Hi, the machine is sold long time ago
Price this machine
Very cool!
Thanks for sharing.
Nice small mill, for keeping or selling?
PRICE THIS MACHINE
But hows it clean the chips off for tool change?
that is not implemented by denford
Nice ...
great job
Is that the standard Denford spindle?
yes, spindle is standard, i changed the main motor for a delta drive
@@tantancnc is that 30 or 35 size please ?