I know Im asking randomly but does anybody know of a way to log back into an Instagram account?? I was dumb forgot the password. I would appreciate any tips you can give me!
@Carmelo Zion I really appreciate your reply. I found the site on google and I'm trying it out now. Takes a while so I will get back to you later with my results.
Thank you for these videos! I have noticed when recording my own audio samples the loop always pop clicks when starting over, even if the recording is the exact same from start to the end ( for example a solid note just playing no changes in tone or rhythm) , and even if I change the start and end clip I still get a pop click when the loop starts again. How do I avoid this?
What’s up Tom?! I do have third party kits loaded into my force. Just so you know, you can use MPC kits with the force. So to answer your question, most likely it was a third party kit. The force kits are okay but adding more kits is a must! 👊🏾👍🏾
Damn I have a question how’s the pitch sample rate compared to the live 2 once you change the pitch the sound gets distorted? Does the force do the same thing
Hi I signed on your Channel. I bought Akai force Is a war 😂 I'd like to know how play a sample recorded with sampler (or One putted via computer mode) with akay mini keyboard. Many thx and good job for your channel
@@marcuselbow Honestly, I was intimidated and fell back. I'm relearning. I have to keep going. I've searched several channels. You're the best to lear about the Akai Force brother.
Hey Marcus. When I plug my iPhone 11 Pro into the back of the force in usb, the force screen says device not recognized or usb device is not supported or something along those lines. What in the world should I do. I’ve got to be able to sample.
Awesome thank you. Watched it and completely get that part. Now what if the sample says 120 bpm but after it goes into the force it says 96. How do you correct that.
Sometimes the key is off in Looperman or non-existent. I try to be a good Samaritan and let them know what the key is but sometimes they get all butt hurt about it 😂
Hi man, your videos are very usefull! Just got my force 2 days ago. However, i got one question, maybe you can help me out. I was playing with the sample editor, in wich i loaded one of the internal vocal samples. But when i chop it up via the lazy chop, when i hit a pad it plays the chops back really loud! Way louder then when i put the same sample in a clip to play it. There is a huge volume difference. Is this normal behaviour? Could it be the sample? I think the force has a massive output signal anyway..it can get loud 💪🏻
Thank you, love the way you explain and portray it! Maybe one question, how do you connect your cell phone to the Force ...? keep making music (and tutorials :-)) !!
What’s good Stefan?! It’s easy bro, just connect your phone directly to the input jacks in the back of the force. These are the wires I use Hosa YMP-434 3.5 mm TRSF to Dual 1/4" TS Stereo Breakout Cable www.amazon.com/dp/B0010D0HO0/ref=cm_sw_r_cp_api_glc_fabc_2yM1FbT4F68N9?_encoding=UTF8&psc=1
I get asked this a lot 🤔 No worries! I’m going to make a video showing how to connect and sample from your phone using the Akai force. Give me a few days bro bro. 🙏🏾👊🏾
I have to thank you. Firstly for getting me to get the akai force and most importantly is the lessons. You really make it easier for slower minds like mine.
You are the best man. You always make me smile too.
This my dear Sir, was very helpful to me, as a starter on the Force! Thanks!
i looooooooooooooove elbow studios..thanks for keeping thins clear and simple
You have a great voice and presentation style. Keep the Force videos coming.
No doubt Ketil! Thanks for watching!! 🙏🏾👊🏾
I know Im asking randomly but does anybody know of a way to log back into an Instagram account??
I was dumb forgot the password. I would appreciate any tips you can give me!
@Leighton Tanner instablaster ;)
@Carmelo Zion I really appreciate your reply. I found the site on google and I'm trying it out now.
Takes a while so I will get back to you later with my results.
@Carmelo Zion It did the trick and I actually got access to my account again. I am so happy:D
Thank you so much you really help me out !
Great video. Thanks! Liked, subscribed, and all that jazz.
Thank you again mate! Can i ask you about some making Jungle tutorial? or it's not your field?
Your welcome Dennar! Sorry bro bro not my genre music. Thanks for watching! 🙏🏾👊🏾
Great video ,😎 love the efforts and content you put in the culture and community bro, keep it up!
Thanks Lionel! I appreciate that bro! Mad respect fam!!🙏🏾👊🏾
Thank you for these videos! I have noticed when recording my own audio samples the loop always pop clicks when starting over, even if the recording is the exact same from start to the end ( for example a solid note just playing no changes in tone or rhythm) , and even if I change the start and end clip I still get a pop click when the loop starts again. How do I avoid this?
great video! was the drum kit you used a stock kit included with the force or a third party sample set you added?
What’s up Tom?! I do have third party kits loaded into my force. Just so you know, you can use MPC kits with the force. So to answer your question, most likely it was a third party kit. The force kits are okay but adding more kits is a must! 👊🏾👍🏾
Damn I have a question how’s the pitch sample rate compared to the live 2 once you change the pitch the sound gets distorted? Does the force do the same thing
Yes that issue is present here as well.
Time stretch that retains pitch?
Yelp!
Thisis the 1st time the Akai Force didn't look scary as hell to me hahahha. Dope stuff.
Lol....Thanks for watching 7wounds! 🙏🏾👊🏾
Those chops ain't lazy, they workin' full-time bruh!! Big ups!
Hi I signed on your Channel. I bought Akai force Is a war 😂 I'd like to know how play a sample recorded with sampler (or One putted via computer mode) with akay mini keyboard. Many thx and good job for your channel
Please help me hahahah
Mate you are a legend. My force is sitting at home waiting to be unpacked. Can’t wait to get started. ✌️
I have to apologize....I have been learning a lot of my new AKAI FORCE with your videos and I haven't subscribe....NOW I HAVE. SORRY & TY!!
including bell
Thank you brother! If you need a more stream lined course check this out: elbowmediastudios.com/products/akai-force-beginners-course
This an awesome channel.
great one marcus!
I’m learning mane
daaaamn, talk about makin it easy. also ready for dark mode? lol love it
Thanks Wylatron! 🙏🏾👊🏾
I'm learning how to use my Akai Force thanks to you Marcus Elbow 🏆
Thank you!
Your welcome Warren! 🙏🏾👊🏾
@@marcuselbow Honestly, I was intimidated and fell back. I'm relearning. I have to keep going.
I've searched several channels. You're the best to lear about the Akai Force brother.
Hey Marcus. When I plug my iPhone 11 Pro into the back of the force in usb, the force screen says device not recognized or usb device is not supported or something along those lines. What in the world should I do. I’ve got to be able to sample.
Video coming soon bro! 🙏🏾👊🏾
Here you go bro bro: ua-cam.com/video/Y5g308DXeM8/v-deo.html
Awesome thank you. Watched it and completely get that part. Now what if the sample says 120 bpm but after it goes into the force it says 96. How do you correct that.
Sometimes the key is off in Looperman or non-existent. I try to be a good Samaritan and let them know what the key is but sometimes they get all butt hurt about it 😂
I don’t have discard as an option on my Force; only Extract. Is there something I’m doing wrong when I select process?
Could you tell me what hardware I need to sample off my phone plz. Thanks. Oh yea it's a galaxy s8
Ask, and it will true! 🙏🏽👍🏽🇬🇧
Yes sir!!
I didn't see you plug the phone into the Akai or a hub? Was that sample recorded without phone being plugged into either the force or a hub?
No I had the phone plugged in via the inputs on the back. I talked about this at 2:35 👊🏾
16:30 I thought you was finna freestyle 🤣🔥
Lol..naw not on this one!!💪🏾👊🏾
excellent teacher, very helpfull, thnx
Thanks Israel!! I appreciate that sir! 🙏🏾👊🏾
We’ll done!
Hi man, your videos are very usefull! Just got my force 2 days ago.
However, i got one question, maybe you can help me out.
I was playing with the sample editor, in wich i loaded one of the internal vocal samples. But when i chop it up via the lazy chop, when i hit a pad it plays the chops back really loud! Way louder then when i put the same sample in a clip to play it. There is a huge volume difference. Is this normal behaviour? Could it be the sample? I think the force has a massive output signal anyway..it can get loud 💪🏻
“Off the muscle” Elbow you from DC or MD?
H-Town 👊🏾
@@marcuselbow 👊🏿 born in San Antonio but i’on know nuthin bout it… Salute!
What that sample app? Looper?
Looperman.com
Thank you, love the way you explain and portray it! Maybe one question, how do you connect your cell phone to the Force ...? keep making music (and tutorials :-)) !!
What’s good Stefan?! It’s easy bro, just connect your phone directly to the input jacks in the back of the force. These are the wires I use Hosa YMP-434 3.5 mm TRSF to Dual 1/4" TS Stereo Breakout Cable www.amazon.com/dp/B0010D0HO0/ref=cm_sw_r_cp_api_glc_fabc_2yM1FbT4F68N9?_encoding=UTF8&psc=1
Hey when I connect my iPhone to the usb in back, the force screen says “usb device not supported” What do I need to do here. Marcus
I get asked this a lot 🤔 No worries! I’m going to make a video showing how to connect and sample from your phone using the Akai force. Give me a few days bro bro. 🙏🏾👊🏾
I have to thank you. Firstly for getting me to get the akai force and most importantly is the lessons. You really make it easier for slower minds like mine.
This video helped me.
Cool! Thanks for watching!!🙏🏾👊🏾
elbowMedia Studios I look forward to more Force tutorials. 3.0.6 has added much needed functionality and I feel more to come from Akai.
easy way to understand with elbow....thanks
No doubt fam!! Thank for watching!!🙏🏾👊🏾😎