I just did one yesterday so one needs to be set to access point and the other to Station I was using tightVNC to stream host display to station but it took a long time for me to figure out how to make it work correctly. To be honest I’m not exactly sure what I did to fix it because I repeated and repeated steps to go from listen mode when things would not connect on tight VNC.
I have 2 setup in PTP / AP repeater mode.(One on the side of my patio and the other on the barn for internet) It works great but, I'm not able to login to each individual nano station, to change the settings while connected to the wifi. (Right now, I just connect to each via the ethernet cable). Is this possible to have it setup like that? I noticed none of the Ubiquiti server stuff, doesn't show the networks unfortunately.
Do you know if I do this configuration like AP I can have the wifi signal in 2 KM of distance? I mean use it in a farm area, very clean no threes no buildings. Have you any considerations about the configuration? my ideia is setup the Nano Station M2 like AP in Bridge mode
have had such an antenna for about 5 years. I have never changed anything since I made the connection between them. now I'm noticing that for the last 7 days I'm losing my internet connection, or my downloadig drops from 60MB/s to 0 Mb/s for seconds to a few minutes, then the connection is established at 14Mb/s for a while, then it rises to 60 and so on. In short, the connection fluctuates or I don't have it at all. does the code have such a problem or has it broken down after all these years?
Try this There are three default passwords: 1. Username: ubnt Password: ubnt 2. Blank; no username or passwords, login blank 3. Username: admin Password: admin If it doesn’t work, try resetting the AP and try again with these password.
There are 3 default passwords. 1. Username: ubnt Password: ubnt 2. Blank; no username or password, login directly 3. Username :admin Password: admin If it doesn't work, try resetting the AP and try again with these password.
Thank you so much, i wasted 2 hours before finding your tutorial and it just worked
Thanx for the clear explanation, got it finally working.
You’ve explained so well 👏 👏 how about point to point and not Access point
any follow up on this?
I just did one yesterday so one needs to be set to access point and the other to Station I was using tightVNC to stream host display to station but it took a long time for me to figure out how to make it work correctly. To be honest I’m not exactly sure what I did to fix it because I repeated and repeated steps to go from listen mode when things would not connect on tight VNC.
Eres el mejor mi hermano
Thank you buddy, very useful video. Gold bless you.
Completely forgot about the airMAX! thank you.
I have 2 setup in PTP / AP repeater mode.(One on the side of my patio and the other on the barn for internet) It works great but, I'm not able to login to each individual nano station, to change the settings while connected to the wifi. (Right now, I just connect to each via the ethernet cable). Is this possible to have it setup like that? I noticed none of the Ubiquiti server stuff, doesn't show the networks unfortunately.
Do you know if I do this configuration like AP I can have the wifi signal in 2 KM of distance? I mean use it in a farm area, very clean no threes no buildings.
Have you any considerations about the configuration? my ideia is setup the Nano Station M2 like AP in Bridge mode
have had such an antenna for about 5 years. I have never changed anything since I made the connection between them. now I'm noticing that for the last 7 days I'm losing my internet connection, or my downloadig drops from 60MB/s to 0 Mb/s for seconds to a few minutes, then the connection is established at 14Mb/s for a while, then it rises to 60 and so on. In short, the connection fluctuates or I don't have it at all. does the code have such a problem or has it broken down after all these years?
and upload is always full 60Ms/s
Nice thanks
nice tutoria tysm!!
Cool
the video is very useful
Is there any problem when i put country USA and am not from that region?
Even though im doing the first steps correctly(my cables are all working properly) i cannot ping the device in order to login. Any help?
Wow
can anybody please tell me whats the range of ubiquitti nanostation M2
i need range in 5 km can anybody pls suggest me which product should i buy
The WPA2 security can i put different password or i must put administrator's password
Thank you
Most welcome 🙂
@@howto658 worked perfect was having a bit of a nightmare when I did it all worked but did not connect to the internet so thanks
do one for mikrotik
When I type ubnt in password or username place it said it's wrong. Can you help me about it
Try this
There are three default passwords:
1. Username: ubnt
Password: ubnt
2. Blank; no username or passwords, login blank
3. Username: admin
Password: admin
If it doesn’t work, try resetting the AP and try again with these password.
Password not user name is not working for me
There are 3 default passwords.
1. Username: ubnt
Password: ubnt
2. Blank; no username or password, login directly
3. Username :admin
Password: admin
If it doesn't work, try resetting the AP and try again with these password.