Awesome code, what are the accurate turns used. Especially the part where it goes back and turns left near the two red blocks, it’s hard to find the accurate angle. Thanks, hats off!
spin the intake forward or back forever before adding the drivetrain blocks. there should be a motion block not designating a motor group or motor to spin for a certain amt of times or revolutions. thats the block u need before the drivetrain motions. hope dis helpful :)
How do you make your robot turn in an Arc while still driving forward or backwards. My team is also using C++ and this is something I couldn't figure out.
@@TheyCallMedasfsadfhjc I did that. I found out after trying C++. Though for some reason after my teams robot aligns with the goal zone, the elevator doesn't go up. It doesn't get stuck or anything but it just stays still.
basically, for an arc movement, you will need your drivetrain motors as separate motors like “left drive” and “right drive”. after that, u need to make a pair of the two for motion with “and dont wait” between the two. lastly, depending on the direction of arc desired, set that motor to a higher value than the other, making one side move more and making an arc of the robot. hope this helps :)
Hello, after looking at your machine, I feel like my life has suddenly brightened up. I really admire you. If possible, could you show me the drawings? Thank you very much
Can i get your email Eric I'm not sure if it was the right email that i sent it to and if it was the right email can you check you email just in case. Thank you for the videos and help.
Bro bought his robot from china
he is the mentor
@@Ultra-nl7mvlol
The GOAT of autonomous is back!
your auto are the best🎉
INSANE
Awesome code, what are the accurate turns used. Especially the part where it goes back and turns left near the two red blocks, it’s hard to find the accurate angle. Thanks, hats off!
The goat is back
Wow!!! World No.1?
How do you code the bot so that your intake and drive-train, both work at the same time?
spin the intake forward or back forever before adding the drivetrain blocks. there should be a motion block not designating a motor group or motor to spin for a certain amt of times or revolutions. thats the block u need before the drivetrain motions. hope dis helpful :)
Even that thing is working better than my brother 💀💀 TEACH ME 👹👹👹
what kind algorithm you used to turn so precisely?
PID
Awesome awesome 🎉🎉, may I know where are you from and which team you belong to?
296a
Incredible robot design! Does your intake get jammed with purple cubes sometimes?
It probably never does
Probably not because that first roller moves up a lot
How do you make your robot turn in an Arc while still driving forward or backwards. My team is also using C++ and this is something I couldn't figure out.
pd loop, search it up or use motor time out
I'm pretty sure you need to make two different blocks of code, one for turning and one more moving
@@TheyCallMedasfsadfhjc I did that. I found out after trying C++. Though for some reason after my teams robot aligns with the goal zone, the elevator doesn't go up. It doesn't get stuck or anything but it just stays still.
basically, for an arc movement, you will need your drivetrain motors as separate motors like “left drive” and “right drive”. after that, u need to make a pair of the two for motion with “and dont wait” between the two. lastly, depending on the direction of arc desired, set that motor to a higher value than the other, making one side move more and making an arc of the robot. hope this helps :)
Hello, how do you make the intake roller that quick to suck up the cubes
He has a wiggly roller
How did you team do at worlds?
hey look whos back! how many points?
Like 130
Odom or PID? Also what was score?
do you use any optical or distance sensor？
Hello, after looking at your machine, I feel like my life has suddenly brightened up. I really admire you. If possible, could you show me the drawings? Thank you very much
defo not sus that all the robots with this auton look the exact same
How does the robot not drift?
PID
is intake ratio at 300 -150- 300 RPM top to bottom with connected pneumatic at 2" height front intake? That's really nice...
no pneumatics, its a 3:1 gear ratio
that robor loks familiar
How many points
Can you send a screenshot of your code pls.
is it me or does the robot just start by itself
You know atticus
who is that😂
this from china
can i get your code please
Who are you
aha？who am I？just a teacher from China😂
ill pay you 50 cents for the code (trust)
😁
do you use text or block to code
text
C++ or python
C++
Can i get your email Eric I'm not sure if it was the right email that i sent it to and if it was the right email can you check you email just in case. Thank you for the videos and help.
maybe wrong email
269A code
can I add ur discord I need to ask some stuff
sorry i dont have that
is there a way i can contact you personally@@ericshen4033
maybe email，hahah@@thecappedpin
Hello Eric! What is your email? So I can communicate to you about this excellent design! @@ericshen4033