I purchased a 1958 GMC truck on a chevy s10 frame with bags on all four corners for my birthday. It has the typical rust spots I need to repair. I am so glad your videos came up on my feed. Your work is at another level. Thanks for sharing your experience with us that want to keep old cars on the road so everyone can enjoy them.
Oh! How long have I been waiting for your new episodes! I watch your work. I try to repeat it, restoring old cars. Hell, when everything works out, I feel like a happy person. I do not understand English, but it is interesting and useful to watch you. I wish you success in your art! Greetings from Russia!
I love seeing videos like this! My dad and I both have 1936 Ford trucks, and it’s nice to see someone make panels for them. I hope to see more videos related to these trucks! 😁
Thank you for sharing your experience. I appreciate the opportunity to learn new ideas. Your presentation skills and approach as you work through the details is amazing.
Inspirational, follow your hearth in life that's for sure. If i could go back 20 years i wouldn't have passed up the opportunities that came along in regards to a carer in metal shaping, fabrication that i was interested in, now it's a hobby. Instead the stupid youth wanted to get drunk and work dead end jobs. (Lazze reminds of Thomas on American Hot rod way back)
Great to see you again! Thank you for the years of learning you have provided. Maybe for the next series, you could show how to do structure that goes inside the body. Whatever you do will be greatly appreciated.
Hello, how are you? Good afternoon, my name is Fabian, my greetings from Buenos Aires, Argentina, your videos are very good, thank you very much for sharing your work with us
More of this, please 😊. The best instruction videos I found so far. Unfortunately its a 14 h flight from my place to California, otherwise I would purchase a set of Your machines and take a class instantly. Too bad, Sweden would have been much closer 😁.
Hi Lazze, I’m Laura, Thank you so much for your awesome videos, you’re a wonderful teacher! I’m learning so much from your step by step approach. I really love working with metal and right now I have a big interest in learning how to use the English wheel. I’m also researching which one I’d like to buy. From here I’m going to go to your website and hope to find instruction for using a slip roll. I’ve been able to use the 12” Diacro slip roll that I purchased a few years ago quite a lot and I really like it, but I struggle with the fine adjustments. It’s all so much fun:) Thank you so much again for sharing your knowledge and expertise! Take care, Laura Lynn
Mrs Richards: "I paid for a room with a view !" Basil: (pointing to the lovely view) "That is Torquay, Madam ." Mrs Richards: "It's not good enough!" Basil: "May I ask what you were expecting to see out of a Torquay hotel bedroom window ? Sydney Opera House, perhaps? the Hanging Gardens of Babylon? Herds of wildebeest sweeping majestically past?..." Mrs Richards: "Don't be silly! I expect to be able to see the sea!" Basil: "You can see the sea, it's over there between the land and the sky." Mrs Richards: "I'm not satisfied. But I shall stay. But I expect a reduction." Basil: "Why?! Because Krakatoa's not erupting at the moment ?"
SKU is 14-115 on his website www.lazzemetalshaping.com listed under hand tools. www.lazzemetalshaping.com/index.cfm/page/ptype=product/product_id=80/category_id=-1/mode=prod/prd80.htm
thats why i built my bead roller with 12" of drop on the lower roller chain driven shaft nothing more aggravating than hanging up and getting a crooked bead
You are the master of fabrication.
Glad to see you back!
old henry ford would be proud to have you on his design and fabrication team
I purchased a 1958 GMC truck on a chevy s10 frame with bags on all four corners for my birthday. It has the typical rust spots I need to repair. I am so glad your videos came up on my feed. Your work is at another level. Thanks for sharing your experience with us that want to keep old cars on the road so everyone can enjoy them.
Nice work Lazze!
I learn so much about how metal moves when shaping it. Thank you
👍👍👍👍👍👍 thanks for sharing your expertise 😎
Oh! How long have I been waiting for your new episodes! I watch your work. I try to repeat it, restoring old cars. Hell, when everything works out, I feel like a happy person. I do not understand English, but it is interesting and useful to watch you. I wish you success in your art! Greetings from Russia!
You are a genius and yet so humble. Thanks so much for sharing your knowledge.
Det är alltid en höjdare att se dina videos!
Very nice work, as usual!!!
I love seeing videos like this! My dad and I both have 1936 Ford trucks, and it’s nice to see someone make panels for them. I hope to see more videos related to these trucks! 😁
Thank you for sharing your experience. I appreciate the opportunity to learn new ideas. Your presentation skills and approach as you work through the details is amazing.
Good job friend and thanks for sharing it
Thank you for another inspiring video.
You are my favorite metal shaper.
Inspirational, follow your hearth in life that's for sure. If i could go back 20 years i wouldn't have passed up the opportunities that came along in regards to a carer in metal shaping, fabrication that i was interested in, now it's a hobby. Instead the stupid youth wanted to get drunk and work dead end jobs. (Lazze reminds of Thomas on American Hot rod way back)
Great to see you again! Thank you for the years of learning you have provided. Maybe for the next series, you could show how to do structure that goes inside the body. Whatever you do will be greatly appreciated.
Hello, how are you? Good afternoon, my name is Fabian, my greetings from Buenos Aires, Argentina, your videos are very good, thank you very much for sharing your work with us
Nice patch panel , Well done !
Great video Lazze, your a true master craftsman.
More of this, please 😊. The best instruction videos I found so far. Unfortunately its a 14 h flight from my place to California, otherwise I would purchase a set of Your machines and take a class instantly. Too bad, Sweden would have been much closer 😁.
Thank you for sharing this video
Hi Lazze, I’m Laura, Thank you so much for your awesome videos, you’re a wonderful teacher! I’m learning so much from your step by step approach. I really love working with metal and right now I have a big interest in learning how to use the English wheel. I’m also researching which one I’d like to buy. From here I’m going to go to your website and hope to find instruction for using a slip roll. I’ve been able to use the 12” Diacro slip roll that I purchased a few years ago quite a lot and I really like it, but I struggle with the fine adjustments. It’s all so much fun:) Thank you so much again for sharing your knowledge and expertise! Take care, Laura Lynn
I love watching your videos and would really like to see you weld a panel in. Thank you for another great lesson
I love it!! Keep up the good work.
Awesome, thank you!
Gracias por tus tutoriales maestro sin unas clases magistrales para mi gracias
Gosto muito de ver o seu trabalho também o pratico obrigado pela sua disponibilidade para ensinar
A pity that I cannot give you 200 likes in this single video!! Thanks!
Thanks for that very informative
Nice videos, do you have a video how to weld this panels together without distortion?
с удовольствием всегда вас смотрю!!!
Would love to come and learn
Has anyone seen the metal shaping buck patterns, for cats like the 627 Cobra and Ferrari GTO, for sale on websites like Etsey?
Hi Lazze, i need you help with a machine bead roller !!
Consider changing channel name to "Sheet metal whisper" :D
Hello sir, is your website still on? It seems not working now
Mrs Richards: "I paid for a room with a view !"
Basil: (pointing to the lovely view) "That is Torquay, Madam ."
Mrs Richards: "It's not good enough!"
Basil: "May I ask what you were expecting to see out of a Torquay hotel bedroom window ? Sydney Opera House, perhaps? the Hanging Gardens of Babylon? Herds of wildebeest sweeping majestically past?..."
Mrs Richards: "Don't be silly! I expect to be able to see the sea!"
Basil: "You can see the sea, it's over there between the land and the sky."
Mrs Richards: "I'm not satisfied. But I shall stay. But I expect a reduction."
Basil: "Why?! Because Krakatoa's not erupting at the moment ?"
Hi lazze I would like to buy some of the gloves you wear ,could you tell me the model number of the glove please,,,many thanks from uk
SKU is 14-115 on his website www.lazzemetalshaping.com listed under hand tools.
www.lazzemetalshaping.com/index.cfm/page/ptype=product/product_id=80/category_id=-1/mode=prod/prd80.htm
@@dannyzuko1843 thank you
Why is laze still on you tube he no longer adds videos so what is the value?
thats why i built my bead roller with 12" of drop on the lower roller chain driven shaft nothing more aggravating than hanging up and getting a crooked bead