I have owned mine for about a year. Stopped wearing it about 5 months ago when I almost lost it on a 60 mile trail ride on my XR600. The vibration shook a couple screws loose and it came apart. Luckily I noticed it before it was long gone. It has come in handy a few times. Mostly to tighten loose hardware. I do wish it was geared a little more to outdoor survival, and not so much office cubicle survival. I think it would be cool if there were optional tools that could be purchased, to customize each bracelet to its owner. A fire starter, a threaded water tight tube 1/4" in diameter to put fire starting fluid, a compass, ....Was also hoping they would make a square watch for it. The round one just looks out of place.
A $60 price difference for the black one? No thanks Leatherman. Poor metal that bends/warps and does not stay sharp after one use. Better to wait till they don't sell well and the price drops.
Unlike the standard Leatherman this is something you can actually take on a plane! Having worn a Leatherman Wave since it was first released every single day until a few years ago when I couldn't at work for a combination of reasons this bit of 'man jewelry' seems to be the ticket. Sure it's expensive but so was my Saddleback briefcase. Bottom line is it is on my wish list because I can wear it to my Second Amendment infringing job. And like the Leathermans before I'm certain it will get some use.
+The Late Boy Scout I may further upset some and even spring for the watch version. I remember thinking the Leatherman Supertool was expensive until I bought one and used it regularly on the job. At the time that was climbing towers and saved me on a regular basis from climbing down hundreds/thousands of feet to retrieve a tool that could do the job. The incredible warranty is what has kept me addicted. Unfortunately I have noticed similar issues with some other Leathermans where the metal doesn't hold up but they replaced them no questions asked. Having purchased Leathermans for more than one family member who in turn lost them to the TSA is another thing that is painfully obvious. I don't want to buy the TSA any more of these. Great review and thanks for the prompt response.
+USCOMBATDIVER Hi have you actually taken one onboard or are you just guessing? I suspect you would have this taken from you.(maybe by an over vigilant ) security staff- maybe not- It isn't a metal watch band. On another note, it looks really cool but there are many screws to come out and once this happens, one's "cool" survival wrist bracelet etc etc will be bits and pieces. I'm going to check them out anyways and maybe review too.
Way worse in Australia. Firstly, they only just released in Australia. The shipping to Australia often doubles the price for leatherman's and the Australian dollar is shit right now further increasing the price. So $165 for you would be close to $350 for me xD
+fl106c Forget about that. You need the 24K gold Finish! For Only $339! These are bargain that cant last all day. LOL www.amazon.com/gp/product/B01602GELU/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B01602GELU&linkCode=as2&tag=opesougun-20&linkId=S3RDS7XO74SRGY77
+Granite there actually is a version with a watch face, it's the Tread QM1. Price is a bit steep though and iirc you lose a couple of the tools to fit the watch
Hey buddy correct me if am wrong but the general consensus is that only mental midge and little kids get that excited about the lunching of a new Ipod, dustbuster or all-in-one crapola tool - are you one of those idiots that spend 3 day in line outside a store to be one of the first people on earth to own an Iphone 6? - if that is your world you need a little comedy in your life, your comment was stupid and I made a stupid joke to be at the same level soooo replay to that jack.
I do not wear man jewelry. I was interested in this tool because it had Allen drivers on it, which is actually what you used to tighten your towel rack.... That was not a phillips... I am assuming you just did a voice over and made a misstatement(it happens), but any person that does any work on cars and such should know what a phillips head is VS an allen driver..... Makes me wonder a little... Having allen bits on my wrist would be great, because I do not wish to carry around a pouch of bits for my leatherman.... You are probably the only person I have seen that thinks the SD card pick is a useful tool. Most people will not be pulling sim cards out on a regular basis. You put a sim card in your phone, you use the phone for 2 years, and then you get rid of the phone... Your point about why you need a softer, more stainless steel was smart! I hadn't thought about that! Sweat is really corrosive! I personally have had a leatherman in my pocket of one variety or another for 20 years. I used them at least 2 times a week, and most of the time, several times per day. I have twisted a bit or two, so if I can do that on regular leathermans, this won't last a year... I was interested in this, but after seeing some reviews, I am now convinced this is a bracelet for the Dandy's(google it).. Thanks for the thorough, and complete review all the same!
you can get it from a clone from aliexpress for $45 shipped, its more of a jewelery than anything else, dont buy it expecting to get a pliers style leatherman
I had some multitools from china, and man none of them stood a chance against a leatherman. The production quality is just not good enough. I'm not saying there are no good multitools on ali, but I failed to find one.
Yea a friend of mine brought me one from the States. I use it every day it is really an awesome tool. A fantastic addition to my long road trips for the bike. I had to remove the belt cutter link so the bracelet fits my hand but I got that link now as a necklace.
I don't like the one I have anymore. This is supposed to double as "jewelry", not just a tool. After very light use, the tools are all marked up and the bracelet looks like crap. Not a good tool and not good jewelry, either.
I Am a woman ,. And i have THE black Letherman Why needs you to say so manny time tis a manly bracelet Girls can love those stuff too 😍! May be They develop. More special tools for THE tread Like a Pencil Sharpener link Why dont develop a link measure digital watch And a good working compas ? By THE way i realy love iT
How is the black finish holding up, any scratches yet? I have a black keychain tool, which already looks very worn after a few months of use, but then again it's scratching against my other keys. I wouldn't expect that much wear on a bracelet.
hahahahaha i live in south africa , this thing costs several hundred dollars here , for the same money i can and have bought an entire toolbox of quality tools to keep in the back of my car. i think its a nice idea but horribly overpriced for a bracelet with tiny tools on it. this is not for normal people with normal budgets.
I work at a retail establishment that sells Leatherman products. I saw this when it was released, and went bananas over it. between myself, and two other guys at my store, I've got three sold right off the bat. BUT, Leatherman decided that mid-sized locally owned retailers were not worth their cool new product, and have spent the last ten months or so distributing them solely through their giant accounts, like cabela's and REI. I have been told by our Leatherman rep that I probably won't get any until the first quarter of next year. I might not be able to order 500 units at a time, but I have stood behind their company for years, and I usually have at least one of every multitool that they make IN STOCK, and ON DISPLAY. My display looks better than the displays at both of the closest Cabela's and REI stores. I'm sorry to vent on your channel Scout, but this is a subject of great irritation to me. I think the tread is SICK, and I have offered them money to sell it for them, and they won't send me even one unit. Money talks, I guess
+The Late Boy Scout The reason why you only see it at larger retail stores is the fact the factory just can't keep up. It sells much faster than they can build them. The are working to improve all of tje above, hiring like crazy.
+guitardavepdx I don't have a problem with Leatherman selling their products to big stores. What I would like to see is them filling orders in the order that they were placed. That's all.
I see there's one in black that looks pretty darn cool for $220 vs. silver at $165. The black looks way better, but $220 worth of cool? Nope!! The other isn't worth $165 either. Especially since it bends (17-4 Stainless Steel according to company site). Choice of black or silver for $50-$80, maybe. I'd have to have some expendable money really burning a hole through my pocket before I'd blow-it on this. In the $50-$80 range that is. I'm surprised Leatherman would release a product that would have that level of performance failure. I expect it from the Chinese all day, but American made (IF it is U.S.A. made)......sheesh!!
I don't own the bracelet but I'm assuming the scribe tip is carbide. The screw drivers especially the flat head can't be made like that because of how brittle carbide is. It was a good idea nonetheless
So, in summing up: It is an impractical, limited functionality, ridiculously chunky, oversize, overpriced, heavy piece of "man" jewellery for those who feel inadequate and have more money than sense. This would sell well in the US where there are an abundance of "men" who need this to feel manly. Seems to be aimed at the US market, given that the hex drivers are in dinosaur measurements. Also gotta lol at the gimp calling the hex drivers philips head drivers. Hate to imagine you would get stung if you ever need to replace one of the "tools".
I wanted one of these for a long time just couldn’t see spending $160 plus tax but right now they’re running a special for $59 so I finally picked one up, I understand about the soft metal you have to pick and choose your fight with this tool. I hope it fits my wrist I have an 8 inch wrist if it doesn’t I hope they can sell me an extra Link, anyway buddy wish me luck
I've had a Gerber multi-tool for 25 years and its still in perfect shape. Leather-man is just as good as a Gerber then. :-) I'd actually buy leather-man now if I needed a new one just because its made in the USA. But seriously Gerber Multitools are just as good though.. That bracelet is dorky! LOL.
I have had mine for two months. It was a gift. I have only used the screwdriver a couple times and used the cutter almost daily. I get so many comments on it. But that's not why I wear it. I'm not into jewellery but this has a purpose.
over $160 for a new toy? i don't think so. i'm content to wait until it's either knocked-off by a "lesser" company, or Leatherman wises up and lowers the price themselves. no way i'm spending THAT much cake on a multitool i may need once or twice a week. even if it is TSA-friendly. and besides, i've already designed numerous TSA work-arounds anyway. and i can assure you none of them cost me over ten bucks.
its that price because of the amount of steel used and nothing more. solid steel can be smelted down for raw material as well. thats what i thought when i heard the price
Maybe you said it but I didn't hear: that little cutter tool is for a seat belt. Judging by how many knives and multitools you own, I think you know that.
Think it's cool you actually put it to the test instead of just giving it the stamp of approval because it's leatherman. Seems it would be the most functional/practical with the watch added, but that makes it crazy expensive!
+rollheavy619 yeah... it only got the stamp of approval because "it looks cool" or because "it's man jewelry"! I know it wasn't because the pick worked, or that the Philips held out.
My pals would quite ritely smack me up side the head if I wasted that amount of cash on a gimmick. Next be saying bear grylls tools would stand up to use. There's a reason that leathermen is one of the best mult toosl...because they ve changed it because it ain't broke. Probably aimed at ur couch outdoorsman.
I like the idea, and I seriously considered buying one, but for the price point, I'm waiting on an improved V2 at the same or lower price point. in other words, I want other people to buy it so they keep making them and improving them before I buy one, but I want one
everyone hating on the price probably pay 80$ a month for their iphone 7 and 600 a month for their f-150, and have never purchased jewelry in their lives.
I was given a leatherman when they first hit the market, it was a very handy and dependable tool but these day many others are just as good yet cheaper, and some with better features, like sog which is what I currently carry
Looks like a good tool. I see it more like a backup tool for redundancy sake. Basically I'd carry and reach for my Surge first. So if i did get a Tread it wouldn't get much use other than as a bracelet. But in a pinch the Tread would be handy to have around.
i stopped at 6:43,,, just to type this,,, if you buy a *Utility Metal Card Tool *Mini Multi Tool the first thing anyone should do, and i promote this idea... is to have *Sand Paper for Steel *Diamond Sharpening Rod *metal file because we all know that most parts on these tools are blunted or not sharp, its the manufacturer's insured intelligence that keeps the consumer safe when unpackaging these tools. Then , when you have these tools "In-Hand",you can sharpen parts as needed. I have a *mini-tool *Leatherman fuse *Victorinox Officer Suisse *Off Brand Multi tool *A small "John Wayne" (in case i want something smaller and lighter) All these of which I sharpened or"Filed" as needed.But ,I also would like to have this Tread Tool, just in case...
I think it is cool. Useful I am sure. But the price is a little much and I think the only people who might buy it will be the people to show it off more than they would use it. And probably not know how to use most of the features. Still cool bracelet. Thanks for the video.
These are ok for light use but tend to fall to bits with heavy wear, I got a similar multi tool off e.bay 8 yrs ago still using it, made in china, but at a third of the cost the quality was a lot better.
Wait, this costs $170? GTFO. Maybe at $99. Reminds me of the GoPro Session 4 being sold for $399... three months later the Session 4 is being sold for $199.
I applaud you for actually testing it, but I honestly cannot see myself wearing this or using this. Seems way too gimmicky. I feel this is a fail from Leatherman. But...maybe someone, somewhere, will use it on the daily. I'm just not that person. Thanks for the review!
Let me explain to all future viewers that this video is an INFOMERCIAL about another crappy over priced multi tool like The GreeWire, Topeak Alien or CTC they are copies of the undisputed Swiss Army Knife
Definitely love the MacGyver factor of it, but I'm not sure I'd use it enough to justify the purchase. I'd really only use the O2 key. Although if you buy this, it's more for cool factor rather than functionality. Kinda like you talked about during the intro. Great review buddy.
Is this bracelet/tool cool? Yes. Is it expensive? Definitely. At 9:05 he says the phillips screwdriver bits on this can give you more torque than a lot of screwdrivers! Seriously? I would bet that a full size phillips screwdriver gives you more torque and is much faster to use. At 9:55 he starts talking about the allen heads, but he call them phillips. Never heard of a allen wrench tool call a phillips before. Cool tool? Yes. Worth the money? No. You can buy pretty good quality full size tools for the price of this and still have some cash left over. I understand the argument that this is man jewelry, like a watch, but many consider a watch a status symbol for a man. A Rolex is a perfect example. Generally, men don't wear bracelets as status symbols. Overall, I think it's a fail.
that hook will snag with knit wear easily, also who spends that money for a bottle opener whe you can pop it with a lighter and then there is the fact that when using ex. the philips screwhead you will scratch the surface with the adjacent fitting
$165? Not going to happen. For me a multi tool is something I have on me to conveniently do tasks. An awkward bracelet is not my idea of a tool I'm going to reach for to solve problems. Some one will buy it and I wish them happiness, but I don't know that person. Multi tools have helped me out through the years, but more than anything they have taught me, is when it comes down to doing the job right there is no substitute for the proper tool. I have jewelry and I have tools. For me the two are mutually exclusive.
snags? how often did it get caught on things... and from your video it seems that it is more of a simple everyday task tool, than a nessesity. Was thinking about getting one, but I love my leatherman and will stick with it!! Thx for the upload and your opinion!!
Still not sure this is for me - although if someone gave me one for free i'd probably use it! I'm glad they also made a couple new traditional multitools this year too.
Great video! Just one question I was wondering what size the screws are that combine each piece together. Both in length and thickness. If you count answer for me that would be so great! Thanks for your time and have a great day :)
Glass jars are not only "not designed to shatter" they're designed NOT to shatter in a standing position, the bottom of glass jars are concave/convex (depending on pov) for a reason, you gave ample proof of that I don't think you didn't know this already, you don't strike me as someone who fell asleep during physics class ;) A good example of applied physics Students who think there's no point in paying attention in class because they believe there's no practical use or reason are just not thinking straight Unless they're under 15 (a "merciful" estimate imo) My 7/8th grade geography teacher used to say "you're here anyway, you might just as well learn something" Besides basic geography (I dropped geo. in 8th grade), I learned he was right
"From a functional standpoint, no, come on..." That's where I bailed, because carrying a $165 half-pound of steel on my wrist as 'man jewelry' just doesn't figure in my life. But hey, there are feminine types that might need some 'manliness' on them.
Geezus. Ever hear of long story short? Yay Im happy for you have a bunch of knives and multi tools. I tuned in for a bracelt review not to hear excessive babble and look at your toys
I'm definitely waiting for an improved version, before I buy it. The reason why is the steel could be stronger and still corrosion resistant, and, it is a bit wide and heavy for my wrist, too.
They could have easily made every bit on the links that press/glue in type so we can get better steel on them, at this price point especially since one of the major selling factors they point out is the belt cutter, why not just go the extra mile and charge us the extra $30-50.With this tool being above the $100 mark, most people buying this would hardly mind it I'm sure. As you said, hopefully with the next iteration of the tool we'll see some improvements.
it is different, i'll give ya that and okay i can see the second kind of cool thing going on but come on....$165??? no where near that much of second kind of cool sir! leatherman, wake up please!
I have owned mine for about a year. Stopped wearing it about 5 months ago when I almost lost it on a 60 mile trail ride on my XR600. The vibration shook a couple screws loose and it came apart. Luckily I noticed it before it was long gone. It has come in handy a few times. Mostly to tighten loose hardware. I do wish it was geared a little more to outdoor survival, and not so much office cubicle survival. I think it would be cool if there were optional tools that could be purchased, to customize each bracelet to its owner. A fire starter, a threaded water tight tube 1/4" in diameter to put fire starting fluid, a compass, ....Was also hoping they would make a square watch for it. The round one just looks out of place.
Samething happens to me at work. I just clip it back on
Tread locker is your friend!
$165 for a bracelet with some screwdrivers on it? Looks cool but not for that price.
Sniper Cat they couldn't even make it for that!
Buy a second hand one
A $60 price difference for the black one? No thanks Leatherman. Poor metal that bends/warps and does not stay sharp after one use. Better to wait till they don't sell well and the price drops.
Rather have a Swiss Army knife than that gimmicky bracelt multi tool
Unlike the standard Leatherman this is something you can actually take on a plane! Having worn a Leatherman Wave since it was first released every single day until a few years ago when I couldn't at work for a combination of reasons this bit of 'man jewelry' seems to be the ticket. Sure it's expensive but so was my Saddleback briefcase. Bottom line is it is on my wish list because I can wear it to my Second Amendment infringing job. And like the Leathermans before I'm certain it will get some use.
Very true. That's a point I neglected to emphasize.
+The Late Boy Scout I may further upset some and even spring for the watch version. I remember thinking the Leatherman Supertool was expensive until I bought one and used it regularly on the job. At the time that was climbing towers and saved me on a regular basis from climbing down hundreds/thousands of feet to retrieve a tool that could do the job. The incredible warranty is what has kept me addicted. Unfortunately I have noticed similar issues with some other Leathermans where the metal doesn't hold up but they replaced them no questions asked. Having purchased Leathermans for more than one family member who in turn lost them to the TSA is another thing that is painfully obvious. I don't want to buy the TSA any more of these. Great review and thanks for the prompt response.
+USCOMBATDIVER Hi have you actually taken one onboard or are you just guessing? I suspect you would have this taken from you.(maybe by an over vigilant ) security staff- maybe not- It isn't a metal watch band. On another note, it looks really cool but there are many screws to come out and once this happens, one's "cool" survival wrist bracelet etc etc will be bits and pieces. I'm going to check them out anyways and maybe review too.
+Bush Camping Tools it is advertised by Leatherman as TSA compliant. I guess you could contact Leatherman if the TSA did confiscate it.
Hi thanks, yeah too right
I was interested until the "165 dollars"... I mean, really?!
Way worse in Australia. Firstly, they only just released in Australia. The shipping to Australia often doubles the price for leatherman's and the Australian dollar is shit right now further increasing the price. So $165 for you would be close to $350 for me xD
USA made, baby! If it were Chinese made it would be half the price, easily.
Well, it is jewelry after all.
+fl106c Forget about that. You need the 24K gold Finish! For Only $339! These are bargain that cant last all day. LOL
www.amazon.com/gp/product/B01602GELU/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B01602GELU&linkCode=as2&tag=opesougun-20&linkId=S3RDS7XO74SRGY77
fl106c you get what you pay for. I spent 200 dollars on one and still working just fine after 7 years.
Love reviews that are from long time experience, really helped me decide if I want this or not!
needs a watch face
+Granite there actually is a version with a watch face, it's the Tread QM1. Price is a bit steep though and iirc you lose a couple of the tools to fit the watch
The watch version is coming out soon
I can wait to buy it!!!!!! NOOOOOOOOOOT
+Juan Alvarez "Not" jokes are the best, dude. Thanks for the sophisticated and knee-slapping humor.
Hey buddy correct me if am wrong but the general consensus
is that only mental midge and little kids get that excited about the lunching of
a new Ipod, dustbuster or all-in-one crapola tool - are you one of those idiots
that spend 3 day in line outside a store to be one of the first people on earth
to own an Iphone 6? - if that is your world you need a little comedy in your
life, your comment was stupid and I made a stupid joke to be at the same level
soooo replay to that jack.
WHERE IM FROM I . If you give 160 dollars for this crap. U would get slapped.
hahahah amen what a terd. love the glass breaker works awsome!!
NateDiaz Shakur where you at leatherman!? selling yall wolf bracelets.
If i gave 160 dollars for that id ask people to slap me and if that failed id slap myself many MANY times..
I do not wear man jewelry.
I was interested in this tool because it had Allen drivers on it, which is actually what you used to tighten your towel rack.... That was not a phillips... I am assuming you just did a voice over and made a misstatement(it happens), but any person that does any work on cars and such should know what a phillips head is VS an allen driver..... Makes me wonder a little...
Having allen bits on my wrist would be great, because I do not wish to carry around a pouch of bits for my leatherman....
You are probably the only person I have seen that thinks the SD card pick is a useful tool.
Most people will not be pulling sim cards out on a regular basis. You put a sim card in your phone, you use the phone for 2 years, and then you get rid of the phone...
Your point about why you need a softer, more stainless steel was smart! I hadn't thought about that! Sweat is really corrosive!
I personally have had a leatherman in my pocket of one variety or another for 20 years. I used them at least 2 times a week, and most of the time, several times per day. I have twisted a bit or two, so if I can do that on regular leathermans, this won't last a year...
I was interested in this, but after seeing some reviews, I am now convinced this is a bracelet for the Dandy's(google it)..
Thanks for the thorough, and complete review all the same!
At 10:49 you can see that he will loos a screw in few moments so ther are a problem with this tool
Are you kidding me? $165 for a bracelet! I love leather man but cmon this thing is WAY over priced. This thing should be sold for no more than $40
Ill sell newspapers for 3 months to buy this crap
you can get it from a clone from aliexpress for $45 shipped, its more of a jewelery than anything else, dont buy it expecting to get a pliers style leatherman
Lol, it's $400 in Australia!
I had some multitools from china, and man none of them stood a chance against a leatherman. The production quality is just not good enough.
I'm not saying there are no good multitools on ali, but I failed to find one.
@@Iustusian Ozark Trail Multiforce.... google it, I bet you'll be surprised.
useless especially at that price.
+jlen82 for that price you can get the really nice leatherman "normal" models.
+jlen82 agree 100% its just a gimmick. Only hard core Leatherman fans will buy it.
+jlen82 yeah is great tool but a very expensive!!!
I bet dollars to peanuts that after the first use of the flat heat its going to look like an S
+Adam Cole I agree totally agree with you. Leatherman knows a die hard fan or a tactacool guy will buy this.
Yea a friend of mine brought me one from the States. I use it every day it is really an awesome tool. A fantastic addition to my long road trips for the bike. I had to remove the belt cutter link so the bracelet fits my hand but I got that link now as a necklace.
nice leatherman bracelet. but i am sold on the tostitos jar. imma go buy one now.... lol
another part to this tool I don't know if it's widely known yet but the bracelet locking clip is a 1/4 inch socket adapter
for that much money these bits should be indestructible
Karaon Indeed, unforgivable in my opinion
The people who bought this bracelet for that price were ripped off
Jason Lee that’s great to hear.
I don't like the one I have anymore. This is supposed to double as "jewelry", not just a tool. After very light use, the tools are all marked up and the bracelet looks like crap. Not a good tool and not good jewelry, either.
I Am a woman ,. And i have THE black Letherman
Why needs you to say so manny time tis a manly bracelet
Girls can love those stuff too 😍!
May be
They develop. More special tools for THE tread
Like a Pencil Sharpener link
Why dont develop a link measure digital watch
And a good working compas ?
By THE way i realy love iT
Cool! Glad you like it.
How is the black finish holding up, any scratches yet?
I have a black keychain tool, which already looks very worn after a few months of use, but then again it's scratching against my other keys. I wouldn't expect that much wear on a bracelet.
yaaaa its for ever adventurous people n preper n even cooooool
n functionality awesome
Because you can't sell men jewellery until you establish how manly it is...
It's designed for men and manly women...
hahahahaha i live in south africa , this thing costs several hundred dollars here , for the same money i can and have bought an entire toolbox of quality tools to keep in the back of my car. i think its a nice idea but horribly overpriced for a bracelet with tiny tools on it. this is not for normal people with normal budgets.
I work at a retail establishment that sells Leatherman products. I saw this when it was released, and went bananas over it. between myself, and two other guys at my store, I've got three sold right off the bat. BUT, Leatherman decided that mid-sized locally owned retailers were not worth their cool new product, and have spent the last ten months or so distributing them solely through their giant accounts, like cabela's and REI. I have been told by our Leatherman rep that I probably won't get any until the first quarter of next year. I might not be able to order 500 units at a time, but I have stood behind their company for years, and I usually have at least one of every multitool that they make IN STOCK, and ON DISPLAY. My display looks better than the displays at both of the closest Cabela's and REI stores. I'm sorry to vent on your channel Scout, but this is a subject of great irritation to me. I think the tread is SICK, and I have offered them money to sell it for them, and they won't send me even one unit. Money talks, I guess
True, I've only seen it at some of those larger retailers as well. I suppose they have their reasons.
+The Late Boy Scout The reason why you only see it at larger retail stores is the fact the factory just can't keep up. It sells much faster than they can build them. The are working to improve all of tje above, hiring like crazy.
+guitardavepdx I don't have a problem with Leatherman selling their products to big stores. What I would like to see is them filling orders in the order that they were placed. That's all.
I see there's one in black that looks pretty darn cool for $220 vs. silver at $165. The black looks way better, but $220 worth of cool? Nope!! The other isn't worth $165 either. Especially since it bends (17-4 Stainless Steel according to company site). Choice of black or silver for $50-$80, maybe. I'd have to have some expendable money really burning a hole through my pocket before I'd blow-it on this. In the $50-$80 range that is. I'm surprised Leatherman would release a product that would have that level of performance failure. I expect it from the Chinese all day, but American made (IF it is U.S.A. made)......sheesh!!
I don't own the bracelet but I'm assuming the scribe tip is carbide. The screw drivers especially the flat head can't be made like that because of how brittle carbide is. It was a good idea nonetheless
So, in summing up: It is an impractical, limited functionality, ridiculously chunky, oversize, overpriced, heavy piece of "man" jewellery for those who feel inadequate and have more money than sense. This would sell well in the US where there are an abundance of "men" who need this to feel manly. Seems to be aimed at the US market, given that the hex drivers are in dinosaur measurements.
Also gotta lol at the gimp calling the hex drivers philips head drivers.
Hate to imagine you would get stung if you ever need to replace one of the "tools".
come on buddy, 5 minutes before you even start the review. just tell us what it does.
Make it a watch band for $100 and I'll buy one.
The watch version is coming
Really like the intro on this video, Scout.
I love the idea of this as a watch band. The price is a little steep for my budget, but hey, on the wish list.
Did you just call an Allen head a Philip's head?
+Randomness Yes I did. Obvious brain fart.
I wanted one of these for a long time just couldn’t see spending $160 plus tax but right now they’re running a special for $59 so I finally picked one up, I understand about the soft metal you have to pick and choose your fight with this tool. I hope it fits my wrist I have an 8 inch wrist if it doesn’t I hope they can sell me an extra Link, anyway buddy wish me luck
I've had a Gerber multi-tool for 25 years and its still in perfect shape. Leather-man is just as good as a Gerber then. :-) I'd actually buy leather-man now if I needed a new one just because its made in the USA. But seriously Gerber Multitools are just as good though.. That bracelet is dorky! LOL.
All the screwdrivers on my Juice XE6 are twisted a bit... However, I have been using and abusing it almost daily for more than 8 years!
I have had mine for two months. It was a gift. I have only used the screwdriver a couple times and used the cutter almost daily. I get so many comments on it. But that's not why I wear it. I'm not into jewellery but this has a purpose.
this looks good but, i think it'd be more useful if the bits were held together with snaps of some sort to make it easier to access the implements.
over $160 for a new toy? i don't think so. i'm content to wait until it's either knocked-off by a "lesser" company, or Leatherman wises up and lowers the price themselves. no way i'm spending THAT much cake on a multitool i may need once or twice a week. even if it is TSA-friendly. and besides, i've already designed numerous TSA work-arounds anyway. and i can assure you none of them cost me over ten bucks.
Just got one of these for my birthday absolutely love it!!
its that price because of the amount of steel used and nothing more. solid steel can be smelted down for raw material as well. thats what i thought when i heard the price
Maybe you said it but I didn't hear: that little cutter tool is for a seat belt. Judging by how many knives and multitools you own, I think you know that.
Think it's cool you actually put it to the test instead of just giving it the stamp of approval because it's leatherman. Seems it would be the most functional/practical with the watch added, but that makes it crazy expensive!
Thanks.
+rollheavy619 yeah... it only got the stamp of approval because "it looks cool" or because "it's man jewelry"! I know it wasn't because the pick worked, or that the Philips held out.
My pals would quite ritely smack me up side the head if I wasted that amount of cash on a gimmick. Next be saying bear grylls tools would stand up to use. There's a reason that leathermen is one of the best mult toosl...because they ve changed it because it ain't broke. Probably aimed at ur couch outdoorsman.
I like the idea, and I seriously considered buying one, but for the price point, I'm waiting on an improved V2 at the same or lower price point.
in other words, I want other people to buy it so they keep making them and improving them before I buy one, but I want one
Too expensive, and would be cold to wear, no thanks. There is just too much other things more useful tht can be had for that amount of money.
Right??? For 165 bucks Get a new surge and a small EDC blade and call it a day...
everyone hating on the price probably pay 80$ a month for their iphone 7 and 600 a month for their f-150, and have never purchased jewelry in their lives.
I only paid $110 for mine. Also don't forget it has a 25 year warranty and they will replace any bent or broken links.
I'm not rich to buy .so can you give me one.. I'm giving training to young girls on self defense ...so plz can you give me
Nice review. Just ordered it after watching. Thank you!
They should be using 440C stainless to make these. It would be much more expensive than using 304 but it would not bend or twist.
I'm going to buy two of these and give them to my wife so she can play Wonder Woman with them.
First time I have ever heard of a set of pliers being used for 'tactical' purposes.
that super hard link insert that is glued is most likely tungsten carbide
just clicked on the amazon link and saw the price, not that cool in my opinion.
Dude, why are you calling Allen heads Phillips heads?
Yes, strange isn't it. 😂
a hundred and sixty five dollars???? you're outa your mind
no surprise though leathermans are all extremely overpriced
I was given a leatherman when they first hit the market, it was a very handy and dependable tool but these day many others are just as good yet cheaper, and some with better features, like sog which is what I currently carry
It's not s Philips bit. It's called an Allen wrench. Omfg
My first reacting was "this thing needs a watch"
Then there was one
Then I saw the price, even if it's a no-name swiss made
Looks like a good tool. I see it more like a backup tool for redundancy sake. Basically I'd carry and reach for my Surge first. So if i did get a Tread it wouldn't get much use other than as a bracelet. But in a pinch the Tread would be handy to have around.
Can you wear it on a plane? Can't take a standard leatherman on a plane
I've worn it on a plane a few times, yes.
I'm tired of the video by the time the intro ends
this could be a brilliant idea to attach a smartphone to this :D wait... I have a brilliant idea :O
Could you use this as a watch strap?
i stopped at 6:43,,, just to type this,,, if you buy a
*Utility Metal Card Tool
*Mini Multi Tool
the first thing anyone should do, and i promote this idea...
is to have
*Sand Paper for Steel
*Diamond Sharpening Rod
*metal file
because we all know that most parts on these tools are blunted or not sharp, its the manufacturer's insured intelligence that keeps the consumer safe when unpackaging these tools. Then , when you have these tools "In-Hand",you can sharpen parts as needed.
I have a *mini-tool
*Leatherman fuse
*Victorinox Officer Suisse
*Off Brand Multi tool
*A small "John Wayne" (in case i want something smaller and lighter)
All these of which I sharpened or"Filed" as needed.But ,I also would like to have this Tread Tool, just in case...
They need to make a link that will accept driver bits.
I think it is cool. Useful I am sure. But the price is a little much and I think the only people who might buy it will be the people to show it off more than they would use it. And probably not know how to use most of the features. Still cool bracelet. Thanks for the video.
6:06 you have a screw coming out of the bracelet (by your right index finger)......... does the Leatherman Tread have a device to re-tighten it ??
These are ok for light use but tend to fall to bits with heavy wear, I got a similar multi tool off e.bay 8 yrs ago still using it, made in china, but at a third of the cost the quality was a lot better.
all of these I see are for $200 or more. that's insanity.
Wait, this costs $170? GTFO. Maybe at $99. Reminds me of the GoPro Session 4 being sold for $399... three months later the Session 4 is being sold for $199.
I applaud you for actually testing it, but I honestly cannot see myself wearing this or using this. Seems way too gimmicky. I feel this is a fail from Leatherman. But...maybe someone, somewhere, will use it on the daily. I'm just not that person. Thanks for the review!
Let me explain to all future viewers that this video is an INFOMERCIAL about another crappy over priced multi tool like The GreeWire, Topeak Alien or CTC they are copies of the undisputed Swiss Army Knife
Are you sure you know what's a phillips and what's a hex driver?
Definitely love the MacGyver factor of it, but I'm not sure I'd use it enough to justify the purchase. I'd really only use the O2 key. Although if you buy this, it's more for cool factor rather than functionality. Kinda like you talked about during the intro. Great review buddy.
Is this bracelet/tool cool? Yes. Is it expensive? Definitely. At 9:05 he says the phillips screwdriver bits on this can give you more torque than a lot of screwdrivers! Seriously? I would bet that a full size phillips screwdriver gives you more torque and is much faster to use. At 9:55 he starts talking about the allen heads, but he call them phillips. Never heard of a allen wrench tool call a phillips before. Cool tool? Yes. Worth the money? No. You can buy pretty good quality full size tools for the price of this and still have some cash left over. I understand the argument that this is man jewelry, like a watch, but many consider a watch a status symbol for a man. A Rolex is a perfect example. Generally, men don't wear bracelets as status symbols. Overall, I think it's a fail.
that hook will snag with knit wear easily, also who spends that money for a bottle opener whe you can pop it with a lighter and then there is the fact that when using ex. the philips screwhead you will scratch the surface with the adjacent fitting
Wow look how awkwardly i'm screwing stuff in! real useful maybe not so much with the flashing knives around trying to impress people too
$165? Not going to happen. For me a multi tool is something I have on me to conveniently do tasks. An awkward bracelet is not my idea of a tool I'm going to reach for to solve problems. Some one will buy it and I wish them happiness, but I don't know that person. Multi tools have helped me out through the years, but more than anything they have taught me, is when it comes down to doing the job right there is no substitute for the proper tool. I have jewelry and I have tools. For me the two are mutually exclusive.
Is there a Chinese version for $10 😳
ed mercado add 30 dollars
snags? how often did it get caught on things... and from your video it seems that it is more of a simple everyday task tool, than a nessesity. Was thinking about getting one, but I love my leatherman and will stick with it!! Thx for the upload and your opinion!!
Still not sure this is for me - although if someone gave me one for free i'd probably use it! I'm glad they also made a couple new traditional multitools this year too.
It also makes a great makeshift brass knuckle. This in conjunction with good gloves---Great defensive tool.
$165?! that is wayyyy over-priced
Are those two OTF knifes considered automatic or assisted opening?
Total useless and dangerous when wearing in places like Oymyakon and Iceland in the winter.
Thank you for this review! Very helpful. I like your idea of 2.0 version.
Great video! Just one question I was wondering what size the screws are that combine each piece together. Both in length and thickness. If you count answer for me that would be so great! Thanks for your time and have a great day :)
Glass jars are not only "not designed to shatter" they're designed NOT to shatter in a standing position, the bottom of glass jars are concave/convex (depending on pov) for a reason, you gave ample proof of that
I don't think you didn't know this already, you don't strike me as someone who fell asleep during physics class ;)
A good example of applied physics
Students who think there's no point in paying attention in class because they believe there's no practical use or reason are just not thinking straight
Unless they're under 15 (a "merciful" estimate imo)
My 7/8th grade geography teacher used to say "you're here anyway, you might just as well learn something"
Besides basic geography (I dropped geo. in 8th grade), I learned he was right
"Serious" 25 year warranty, haha. Buck and Gerber both have forever warranties.
"From a functional standpoint, no, come on..." That's where I bailed, because carrying a $165 half-pound of steel on my wrist as 'man jewelry' just doesn't figure in my life. But hey, there are feminine types that might need some 'manliness' on them.
Geezus. Ever hear of long story short? Yay Im happy for you have a bunch of knives and multi tools. I tuned in for a bracelt review not to hear excessive babble and look at your toys
I'm definitely waiting for an improved version, before I buy it. The reason why is the steel could be stronger and still corrosion resistant, and, it is a bit wide and heavy for my wrist, too.
it isn't tough because you really aren't supposed to use this as a tool.
Is the mut worth it if you don’t own guns?
Many of what you called "Phillips" heads weren't phillips head. ther than that, interesting review
+SergeantScratchard I mis-spoke, calling Allen heads Phillips heads. Both male names... ;)
+The Late Boy Scout --- Warning bracelet one screw bolt almost unscrew may soon be lost!
Whats your name mean?
Out of all curiosity, were you ever in the military?
Your review sir helped me make up my mind, and I'm gonna buy one. Thank you!
It looks cool and useful, its just i don't think its worth $200 or more
They could have easily made every bit on the links that press/glue in type so we can get better steel on them, at this price point especially since one of the major selling factors they point out is the belt cutter, why not just go the extra mile and charge us the extra $30-50.With this tool being above the $100 mark, most people buying this would hardly mind it I'm sure. As you said, hopefully with the next iteration of the tool we'll see some improvements.
You can buy this bracelet on aliexpress or other chinese ecommerce sites like dhgate, gearbest ect for 30-40$
its freaking ugly
This guy must just love to talk- a message that could have been put out in 20 seconds, stretched out and repeated for 20 minutes. He's killin' me.
why are you then watching and complaining why not stop watching him?
it is different, i'll give ya that and okay i can see the second kind of cool thing going on but come on....$165??? no where near that much of second kind of cool sir! leatherman, wake up please!
i need to remove a link so it fits which would you say, generally is the least used one I can lose?