How to Make | DIY Wood Lathe from washing machine motor
Вставка
- Опубліковано 30 чер 2024
- Make Your Own Lathe using Wood #woodworking #woodtransformer #gold #handmade
DIY Wood Lathe from washing machine motor #woodtransformer
With my passion for woodworking and a vision in mind, I set out to create a wooden lathe. The process involved hours of meticulous planning, cutting, sanding, and assembly. The end result was a functional and aesthetically pleasing tool, perfect for bringing my creations to life with precision and finesse
#woodlathe #woodlathemachine #woodworking #woodtransformer
I will show you step by step how you can make a wood lathe.
You will see and have a very good experience during the movie. All steps are described in the chapters. It's not just a demonstration of putting the parts together, it's a dream based in imagination and construction process. Thanks for watching, subscribing and liking. See you next time. Thank you for watching!
DIY Wood Lathe from washing machine motor #craftydude
Chapters
00:00:00 Checking and Mechanics Parts Assembly
00:00:45 Washing machine motor test
00:01:08 Cut the parts, Gluing the parts
00:04:42 Test of parts
00:05:00 Mechanical Belt Access
00:05:52 Fixing the Rails
00:07:15 Fixing the Support Bearings
00:10:15 Fixing the locks of Rails
00:12:05 Making the bases: Banjo (tool rest base) and Tailstock
00:17:54 Making a Sliding Locks
00:22:16 Poppet Barrel
00:24:07 Top of Tailstock
00:27:52 Top of Banjo (tool rest base)
00:28:09 Making the Toolrest
00:34:49 Base of Motor an Sliding base
00:41:35 Installing the stainless steel bar in the Toolrest
00:44:10 Installing the Brass Bar into the Tailstock
00:45:45 Installing the Brass Round Bar into the Toolrest
00:46:41 Toolrest brass round bar lock
00:48:18 Brass rail stabilizer bar
00:49:37 Control Panel
00:53:41 Side and top trim
00:53:33 Decorative Frames
00:59:05 Poppet Barrel Lock Pin
01:01:23 Handwheel
01:07:05 Oil Finish
01:08:27 Electrical Assembly
01:11:03 First Test making the wooden handle for that same wooden lathe
01:15:24 Final parts
01:16:14 Decorative side protection cover reinforcement
01:16:56 Fixing the Brass Protection Cover and presenting the project
Learn more about our channel. See our top videos. Hey! In order to make your search easier, take a look at our following list with some videos from our official channel.
German Christmas Pyramid - Carousel with Candle
• How to make | German C...
Wooden Gonk and Snowman - Wood Working
• Wooden Gonk and Snowma...
Wooden & Christmas Bells Handles - Woodworking Creativity with mini Lathe
• How to make | Christma...
Tool Cabinet Like a Master Henry O. Studley
• Tool Cabinet Like a Ma...
Tool Box Classic VW Beetle
• Diy Flight Case for To...
Easy Tape Organizer - Make One
• Amazing woodworking pr...
Stanley 95 604L - Upgrade
• 95 604L Stanley - Upgr...
Organizing My Workbench
• How to Make #howtomake...
Easy Bench Vise - Strong Clip
• How to make a Easy Ben...
Should you need any further information, please do not hesitate to contact me by WhatsApp or email.
Phone number: +55 31 984766816.
Email: rc13121977@gmail.com
black forest, cuckoo clock, cuckoo clock repair, woodworking, wood, handmade, woodwork, woodworker, diy, interiordesign, carpentry, design, woodshop, homedecor, furniture, art, handcrafted, maker, custom, makersgonnamake, reclaimedwood, woodcraft, carpenter, woodart, craftsman, rustic, home, decor, furnituredesign, wooden, smallbusiness, walnut
#blackforest #cuckooclock #cuckooclockrepair #woodworking #wood #handmade #woodwork #woodworker #diy #interiordesign #carpentry #design #woodshop #homedecor #furniture #art #handcrafted #maker #custom #makersgonnamake #reclaimedwood #woodcraft #carpenter #woodart #craftsman #rustic #home #decor #furnituredesign #wooden #smallbusiness #walnut #woodworkingprojects #woodworking #gonk #wooden #christmas #gnome #snowman #woodturning #christmasdecorideas #woodturningprojects #woodworkingasmr #woodworkingvideos #woodworkingart #woodworkingforbeginners #woodworkingtools #woodworkingideas #woodworkingtips #woodworkingart
howtomakeDIY Wood Lathe from washing machine motor #craftydude
Absolutely gorgeous man. The only one ive seen come close to this level of craftsmanship was a scratch built treadle powered jewelers lathe, and trust me, you can ask the wife, ive watched a lot of power tool scratch builds! 😂
Hi, How are you? Thanks for your message. I dedicated a lot of time to this project. I'm happy to receive your message. Thank you so much!!! Share with friends!!! 🙏🙏🙏@travisjohnston1923
Well, I hope you check this message. I have access to Black Oak lots of it and I need a lathe maybe do some trading?
Beautiful job! The parts you used for the tail stock, genius! Where did you find the threaded rod with a pulley attached?
Hi, how are you? Thanks for message. I created a sketch and I bought that like a project. About the chuck, I bought in amazon. I believe if you can buy both in amazon. Tips: 1-buy that’s parts (motor, chuck…., 2-build the lathe. 🙏🙏🙏 @bonesstones6584
WOW, ein richtiges Diesner Stück !
🙏🙏🙏😄😄😄
Beautiful job
👍🙏👍🙏👍🙏
Wonderfull Job
Hi, thanks for message!!! 🙏🙏🙏
Beautiful lathe. We shared this video our homemade tools forum this week 😎
I am flattered by your courtesy. thank you so much! If you need more information, I'm at your disposal. @homemadetools #homemadetools
Meus parabéns, olhei o motor de tanquinho da WEG e pensei, este canal é brasileiro? Excelência, louvor no registro de torneira, genial.
Opa, tudo bem? Agradeço muito sua mensagem. Se animar construir um torno ou qualquer outra “máquina” estou a disposição! Pode me chamar no WhatsApp ou pelo telefone!!! Grande abraço Wilson!!!!🙏🙏🙏
Dear Sir,
The video DIY Wood Lathe was good job I like it but it was not detail inside about material.
Please send me detail of chuck,bar and UCF sir, thanks.
Hi, how are you?
This project was made with scrap wood.
About other parts, i bought in amazon.
See the links.
Important: Before buy check measure between pieces.
amzn.to/4b2kgtF
amzn.to/3S3TGYt
amzn.to/3u0PiBo
amzn.to/3HoxZxn
Thanks for your message and subscribe.
@giangla8171
Lindo trabalho, ficou magnífico, você tem o projeto dele em pdf para disponibilizar? obrigado.
Tudo bem? Tenho um lay-out que já apresentei nos shorts, visualmente você consegue ter uma ideia bem detalhada do conceito do projeto. Não fiz desenhos iniciais, fui construindo na medida que as peças foram chegando. Uma espécie de quebra cabeça sem peças definidas. Se não conseguir nos shorts me avise que posso te ajudar! Grande abraço e obrigado pela mensagem!!!!
Awesome video. Did you create your own plans or use premade plans? Would love a pdf plans of this. I have an old washing machine motor I am looking to repurpose and this would be great. Also want to incorporate 3d printing as well.
Hi, I did everything using wood scraps! The base was: Motor, axle and chuck! I'm thinking about designing all my projects. In the meantime I can help you... I have videos in the shots of a detailed drawing of the lathe that can help you. Any information I am available to help! Thank you very much for the message! @3s-Woodworking
If anybody’s looking, I have access to Black Oak will discuss the price range or maybe even trade a wood lays for black oak?
Using thumb as push-stick is one distraction-sound of to the side away from making it a disposable item.....
Hello! how are you doing? Sorry, I didn't understand what you wrote. Would it be possible to tell me in other words so that I can comment? @mastermaker666
I think me means that you came close to losing your thumb by doing something dangerous.
Hello friend! I plan on building something like this for myself, and had some questions.
First, what did you do for the spindle? Did you purchase one, or get it from a broken lathe? Or make it?
Hello friend! Good idea, you can make like that.
About the spindle, this is very importante. I made a sketch and send to mechanic. You can buy in amazon all the peace’s. I bought wash machine motor and controls in amazon.
@@woodtransformer So you had it custom machined? My university has a machine shop, so I might make it there. How has the lathe held up? Is it still going strong?
@@Butteredthanatoast Very strong! Was made for that... Stability, firmness and security. If you need any help, let me know!
@@woodtransformer
I'm considering making my bed ways out of angle irons, 2x1.5 inches, for additional strength. What do you think of this idea?
Also, how powerful is your motor?
@Butteredthanatoast Great! The estructure is very important than a strong motor. Your project, I believe, is a more professional than my. For select the motor you need a lot of attention... 1) what the size of pieces you will make with that lathe? 2) what command control you use for speed control? 3) wells for rpm? My project, 1/4hp, motor well 2”, spindle well 3,5”... my limit piece size 7” diameter.
"Kit MDF" is cyanoacrylate (according to some page I can't read :p), so I think that's like superglue.
Hi, How are you? Yes, i used wood glue with activator. 👍👍👍 @lowa599
Forgot to mention this black coat is seasoned also
What kind of wood is this?
Hi, i used: Ipê, Cumarú, Mogno e Cedro.
I show the names in portuguese language.
If you need help for anything, send a new message. See you a next time!
@@woodtransformer thank you!