CNC Routing Process (CAD, CAM and CNC Control) Variant 2: Part 1 Starting the Design in AutoCAD
Вставка
- Опубліковано 17 кві 2020
- This time I will start with AutoCAD to create the geometric primitives, then to CAMBAM to apply machining operations on the geometric primitives and finally cutting out the parts. In this first part, I will be designing a vertical part holder. A holder for parts like lead screws, rails, rods, and small steel or aluminum profiles.
I upload to Instagram very frequently and add great informative content as well as customer test videos. Make sure to follow me on Instagram at:
/ buildyourcnc_newbiehack
You can get the AutoCAD software from Autodesk.
CAMBAM Software:
buildyourcnc.com/item/CAM-SOF...
I use this CAM software for my purposes. I personally like the simple user interface and I am able to understand the parameters from years of experience, so I don't need CAM software that explains what the parameters mean.
Mach3 CNC Control Software:
buildyourcnc.com/item/control...
This is the software I use with my CNC router.
The greenBullv2 60 degree 4'x8' CNC Router:
buildyourcnc.com/item/cnc-mac...
This is CNC router that I use in my shop and is my favorite as it can also house a laser gantry and it is a great space saver. It takes up the same amount of space as a typical 4'x8' machine, but it is intended to be pushed up against a wall so only one side of the machine needs to be accessed.
All of these machines and software can be purchased at BuildYourCNC.com
buildyourcnc.com/ - Наука та технологія
Thank you for good information and good teaching.
You are welcome
How you do the comamds like I heard the M and Cp
Are you referring to move and copy?
@@PatrickHoodDaniel ok it make sence now
Dowel
watching you use cad is painful. when lining up your holes I was pulling out my hair and screaming "use the measure command!"
Lol man, I think u never used Autocad before :)
Actually, I've been using AutoCAD since 1998 as an Architect and as an Urban Designer. When I'm in the zone, and not worrying about my speech and what I'm going to say next, I can get through some quick work.