This video felt like a throwback to the old days of Jennies Garage, loved it. Also, that type of water pump seal is very similar to the floating face seals used on Excavator Final Drives, also called a duo-cone seal. They're really durable and last a long time if kept clean.
poolman here...what is this technology you may speak of? i only ask because " i no want fix no more" type 25+ years in its just annoying now ...Can this seal withstand more normal heat than a pool motor? Im asking is it new? Stopping leaks would help us all out right? Apoligize if i havent researched yet before i asked. It sounded cool. Couldnt resist that, and...well what if it works?
Smackover Motorsports was the GasGas importer at the time the bike was new. The steering damper is from Drew Smith at Works Enduro Racing. The bike also has some decent period-correct upgrades - LT Racing power valve cover, larger gas tank. It's obvious that at some point the bike was valued and loved, before it was beat on and neglected. These were absolutely incredible bikes back in the day, and will still stand up as a great woods bike. I just finished an engine rebuild on my 99 EC200, and it's back to riding the single track like the day it was new. For those watching this later, Central Powersports Distribution carries the legacy GasGas parts inventory (now Rieju), and the water pump seal IS still available as a kit.
Bearing expert here. Answer to your question is: not much if any, definitely not that much. Thanks for uploading. We'll look forward to next quarter's video. 😁
I think you made all the right calls, you quickly found evidence, and then continued to find evidence proving your hunch was correct.That's how it's done.
Always excited when you upload, nice long video too. If you are interested in small engine repair/motorcycle mechanics this is the nr.1 channel to watch
Great to see a new Jennie's garage video & yes I'd have done the same as you did in trying to fix it. Old hard times had bad gas & was telling you how to help.... Gas Gas, it's all in a name. Camera girl's heckling has gone up a notch too, excellent!
i recently started my dad's old bike, a 1983 honda v45 magna, after sitting for 5+ years. The happiness i felt hearing it start up, whilst it only being able to run on choke and nothing else, was still a huge win for me! seeing you happy that it started reminded me of that moment again, and its still an awesome feeling!
Crazy thing is that water pump seal...its the same as pool motors. A porcelain to porcelain seal. Everyday folks...we learn something new. Also love you guys channel. The positivity the joke attempts, its all just genuine. Thank you. Keep em coming.
Pool service etc is my occupation not by choice its just what i know. But those seals...look identical to pool motors my guess is just a bit smaller. And as you said,,,being threaded backwards on empellars yes...is a thing. Some do have a screw in the center of that guy made of plastic that you can easily stripp out not knowing shes in backwards bud"Like the prop on a airplane. A pool motor is looking the same as i see here as far as seal and sealplate. No volute present for there is no pump pot. Catching the fact that it hit the case due to damage on plastic...good eye. Very good eye. Exactly as you showed...if that seal gets hot and runs without water to cool them..or has that kind of movement allowed they have a fair reason to leak. Its porcelain im not entirely sure how it works not sure science does either but somehow it works without leaking lol...and the heat dissapation is highly pretty recommendedly decent in ceramic. Arent space shuttles made out of this coolness material? its a tiny pool pump. h.3l yeah" also kudos on that 3rd kick....you know u gotta redo all fuel from any purchase....but saving money on the part cleaning solution..from the crappy gas....i cant resubscribe? Upvote from me.
Love to see you making those kind of videos again. I remember 18 year old me being asolutely facinated by what you're doing. 6 year later, still facinated but I started doing similar things. You inspired me questioning buying new things and trying to salvage used. Moreover I started an apprenticeship as an industrial mechanic and now studying mechanical engeneering. Nowadays I constantly think about what I would do while watching and it became a pleasure of a diffrent kind for me. Thanks and keep going please!
Thank you for the great comment. From my point of view I'm just working on stuff. It is heartening to know that the videos may affect someone's life in a positive way. Congratulations on your accomplishments!
You’re going to love it! My co-worker had an early 2000’s GasGas EC250 and it was the smoothest and snappiest bike I’ve ever ridden. GasGas made great bikes.
I remember you guys. Love your banter. It’s arguably better than the resto itself. Keep it up you guys are great and just shows what a good relationship can be.
Cant beat an old 2 stroke!! Ironically enough I pretty much did the exact same thing when I got my old 99 kx250 running after 10 years with the same issue and I used a Jennie’s garage to get it running. The bike is now completely restored and loving life ❤️
Was just thinking about you guys the other day and BAM here you are! I think you proceeded exactly as you should have. The second I saw that baby vomit oil I thought for goodness sakes don't try to crank. Bravo! Looking forward to the test drive. Soon I hope.
I wouldn't call myself a bearing expert, but I've dealt with them quite a bit. There are two reasons for bearing play being a thing: One is to prevent the bearing from locking up or being harder to turn, when the metal expands due to operation in environments above room temperature. The second reason is that every functional surface is manufactured within a certain tolerance - there always needs to be a little play to account for that. There is a DIN Standard which sanctions radial bearing play (or radial internal clearance if you're fancy). It's DIN 620-4, if you want to look it up. It defines four classes of internal clearance: C2, CN, C3 and C4, with C2 representing the smallest amount of play. CN is the standard internal clearance class - the vast majority of roller bearings that are manufactured to the DIN standard, have a CN internal clearance. The internal clearance class is only specified in the designation of the bearing, if it is not CN. Even though not every ball bearing is manufactured to the DIN 625 standard (DIN standard for ball bearings), the internal clearance specified there is going to be comparable to most roller bearings out there. For roller bearings with a inner diameter from 6mm to 10mm, the internal clearance is specified to be between 2 and 13 micrometres. The water pump shaft bearing in the video obviously has a way higher internal clearance than that and it also sounds (and probably feels) like it has seen better days. I love your videos, greetings from Germany :)
Thank you very much for that information! Your comment is an asset to me, and hopefully others who read it. I didn't know of those standardized specs, and I will very likely use those clearance tables in the future.
You guys compliment each other, don't ever become complacent of that fact.I would have drained the oil, refilled, obviously ditched the gas and cleaned carb and got some commitment from the bike before I committed to it.Could have gotten burned for 40 bucks, but that did add a suspenseful cliffhanger for us out here in couch potato land.
I'm still here - so glad you guys are too. Great - fun ! Nice save. Good trouble shooting as well ! Cool to get a good Gas Gas for little money. Looking forward to the ride ...
Great video. I have been watching your videos for many years. This video seemes more like the old ones which i do like. You looked so happy when it started and idled.
Man, you guys are awesome. I love tinkering on engines and watch quite a few UA-cam channels around that, but you guys have the perfect comedic timing. I absolutely enjoyed this video. Thanks for the great content!
Honestly I love this “revival” type of videos so much. I m watching you for 3 days but man, 1hour! I can’t wait to watch till end. Keep going like this ✌🏼✌🏼🫶🏻
Your chemistry is amazing. I’m so happy you’re doing motorcycle stuff so you showed up in my feed. I wouldn’t have found you if you were doing stamp collecting (or watching paint dry) but if you were to start, I’d watch that too.
Water pump seals and shaft are a well known issue with the gas gas bikes . Look up Jim snell videos for all things gas gas . The pampers uses the same engine as the trials bikes.
Just as in any great show, the Star gets all of the good lines - Jennie makes me laugh out loud. Mechanical genius and comic genius makes for a fantastic combo. Hope more is coming soon...
If the scratches REALLY bother you.....EBAY has them coming from Slovakia... Plastic Body Kit-Brand New $250ish Full set of gaskets?.....WHY NOT? They were as unsure as you what they would find, good insurance..... Didn't see you check for plugged emulsion holes...could cause air fuel mix ratio issues.... Old gas? Works as a10:1 mix in your old carburetor machines as well...That's how I dispose of my used motor oil too. Excess food take out napkins filter gas well here... Needed 3 smoke breaks for this one, your "word play" was killing me... 😏😉
Thank you for the recommendation on the plastics! Good to know they are still available. I blew out all the holes that were easily accessible on the carb. It was so clean though, I didn't take it apart any further.
I'm about 3 minutes into the video and I've got to say, that's a pretty good looking dirt bike. Not babied but not completely 100% trashed. Id say it's gonna fire and go!
As someone who spent hours and hours trying to figure out possible problems with clapped out 2 stroke bikes, I REALLY APPRECIATE seeing what you do and how you do it. And with a really tiny tool box. You need to buy some quality tools from the profit when you sell the bikes. Just makes working on stuff alot easier and fun. I also recognize the joy you feel when a bike likes yours starts for the first time. You doubt it will be an easy fix and then you are blown away when it finally runs, and even idles. It gives you a feeling of pride over what you accomplished. I really enjoy when you do a twostroke project but ive seen you understand fourstrokes just as good. Makes me wish we were neighbours so I could learn a thing or two from you :) This video was 10 out of 10. Good job! Cant wait for the next video!
It’s definitely worth fixing that bike. That 300cc two stroke is a GREAT motor. I used to have one. It’s so good for trails and woods riding. Its got all the torque you need for inclines. You don’t have to rev it out to make power. It just tractors right up hills.
ahhhh I missed this happy moments videos! when it starts, your happiness is contagious man! I love watching you 2. best videos and YES you did the right steps, I think if you have started as it was, you could have ruined all.. this way you moved into a cleaning route and paid off!
I REALLY enjoyed that!!!! Great job, and was hooting with laughter at the banter throughout. Love a two stroke, never had one bigger than 100cc, would love a ride on one of these, great job 👍👏👏👏
I am always glad to see you guys picking up projects to work on and watch for entertainment I don’t even own all my quads or dirtbikes anymore got rid of all of them but I still like watching the videos👍🏽
I absolutely love these videos. Thank you for sharing them with us. I immediately got the bucket/bouquet reference, too. "Hyacinth Bucket, lady of the house speaking!!" Haha! 😂. Best wishes and good health to the both of you. Thanks again!
You certainly made the right decision tackling the obvious problems before trying to see if Hard Times was a runner, IMHO. Saved trouble in the long term, and sleep in the short :)
An hour long old bike revival? You're too good to us
Dude whatcha doing over here? It is always cool to see someone I am subscribed to in the comment section of another channel.
I see you on so many dirt bike channels ❤️✌🏼
Hope you enjoyed it, and awesome job hitting that triple!
OMG! DID JD AND JG JUST BECOME BEST FRIENDS???
Haha u waited for the hour long he hasn't done much video witch is a shame he's very entertaining
New Jennies Garage!!! This made my night!
Great you don't post anything for over 2 months now we have to wait for the ride video🤬😉
@@kelvinboyd7459it’s a hard life, mate.
This video felt like a throwback to the old days of Jennies Garage, loved it. Also, that type of water pump seal is very similar to the floating face seals used on Excavator Final Drives, also called a duo-cone seal. They're really durable and last a long time if kept clean.
Glad you liked the video! It looks like that type of seal is more robust than the rubber kind. And it doesn't leave grooves in the shaft.
Also the Same type of seal used on hot tub pump motors.
poolman here...what is this technology you may speak of? i only ask because " i no want fix no more" type 25+ years in its just annoying now ...Can this seal withstand more normal heat than a pool motor? Im asking is it new? Stopping leaks would help us all out right? Apoligize if i havent researched yet before i asked. It sounded cool. Couldnt resist that, and...well what if it works?
The previous owner thought it needed a clutch because it was bathed water and not gripping very well!
The look on your face when it starts is pure joy
Beautiful Sunday, woke up to Jennies Garage, gonna be a good day!!
The dub over is flawless. You two are perfect.
Thank you!
No way DUDE!!! 1h long vid out of nowwhere what a freaking legend, the hero we do not deserve lets get it!
these older videos were what inspired me to buy a dirtbike in the first place and now I love working on them
Same!
Smackover Motorsports was the GasGas importer at the time the bike was new. The steering damper is from Drew Smith at Works Enduro Racing. The bike also has some decent period-correct upgrades - LT Racing power valve cover, larger gas tank. It's obvious that at some point the bike was valued and loved, before it was beat on and neglected.
These were absolutely incredible bikes back in the day, and will still stand up as a great woods bike. I just finished an engine rebuild on my 99 EC200, and it's back to riding the single track like the day it was new.
For those watching this later, Central Powersports Distribution carries the legacy GasGas parts inventory (now Rieju), and the water pump seal IS still available as a kit.
Thanks for taking the time to comment and share your knowledge about Gas Gas bikes.
Matto Cycle and Halls Cycles still have a lot of old GG parts in stock
Camera girl's sarcasm was fire today! Love watching your channel
Quality over quantity...that's why we get excited when y'all post a new vid...it's always a treat ✌️
While I mostly agree, a more rapid cadence would not go amiss.
Been here 10yrs and still love the garage.
Machines frugally brought back to life. With a healthy side or corny jokes. This. This is what the people want!
Bearing expert here. Answer to your question is: not much if any, definitely not that much.
Thanks for uploading. We'll look forward to next quarter's video. 😁
It will be sooner than that. I don't want to wait that long to try out old Hard Times.
The energy between you guys are so amazing and rare! An hour flew by way to fast! Hope to see more from you soon! 😀
Agreed! They are great together!
I felt the happiness of pulling that kick starter!
I think you made all the right calls, you quickly found evidence, and then continued to find evidence proving your hunch was correct.That's how it's done.
A new dirt bike fixing video i can’t believe it I feel like it has been years
Gotta say ,you've got some mad diagnostic skills. You nailed it!😊
Thank you! I felt like I goofed a few times, but that is part of the process.
Having no motorcycle mechanical knowledge I can’t say. But your judgement was Awesome
Thank you!
This is what I've been missing, the 2 of you always cheer me up and make me smile, and this time it for a whole hour. Thanks.
Glad you like the video!
Damn I don't have enough time to watch the whole episode this morning, but you bet I will be back this afternoon to finish it!
I think you proceeded properly. The milky oil problem had to be solved no matter what. Enjoyed this video, thanks!
I love watching you repair these old bikes that other people have given up on. Great job!
Finally! A decent "will it run" video. Back to the roots! Keep it coming! This is the reason why we like your videos...
so awesome watching you and camera girl work on projects. just bought my first bike at 40 yrs old and im loving life
That is great to hear you are having a good time!
Absolutely love these videos. You and Jennie are a hell of a team.
Thank you!
I would watch your videos everyday! We love you guys keep pumping out the great content! We support you! ❤
Always excited when you upload, nice long video too.
If you are interested in small engine repair/motorcycle mechanics this is the nr.1 channel to watch
Glad you like the videos, and thank you for the kind words.
1 hour long im in heaven!
Hope you like it!
@jenniesgarage I did! And to the comment about doing it the way you did, I have 😂 If you assume it runs then you won't get into a Existential crisis
I can just tell Christ lives you two! So much evidence with your light heartedness and patience
best 60 min of this week so far. THANK YOU BOTH
Glad you enjoyed it!
That was very satisfying to watch! Thank you.
Glad you enjoyed it!
The chemistry and comedic timing you both have is remarkable. Your channel is a breath of fresh air. Thank you for posting quality videos.
The chemistry between you and the Mrs. makes these videos just that much more enjoyable. Thanks to the both of you.
Thanks, glad you like the videos.
I always love watch Jennings garage its like im hanging out with a good buddy or a family member just working on bikes
Great to see a new Jennie's garage video & yes I'd have done the same as you did in trying to fix it. Old hard times had bad gas & was telling you how to help.... Gas Gas, it's all in a name. Camera girl's heckling has gone up a notch too, excellent!
Yeah the answer was right there in front of me the whole time.
Glad you fix fixed it.
i recently started my dad's old bike, a 1983 honda v45 magna, after sitting for 5+ years. The happiness i felt hearing it start up, whilst it only being able to run on choke and nothing else, was still a huge win for me! seeing you happy that it started reminded me of that moment again, and its still an awesome feeling!
Yes it is a great feeling when you get an old machine running! I have heard those magnas were fast bikes.
i posted my comment another before the bike started...the smile and camera girl reaction when it worked was absolutely amazing
Remove the cake pan once the oil's drained. It makes picking up dropped tools & bolts much cleaner.
Crazy thing is that water pump seal...its the same as pool motors. A porcelain to porcelain seal. Everyday folks...we learn something new. Also love you guys channel. The positivity the joke attempts, its all just genuine. Thank you. Keep em coming.
Pool service etc is my occupation not by choice its just what i know. But those seals...look identical to pool motors my guess is just a bit smaller. And as you said,,,being threaded backwards on empellars yes...is a thing. Some do have a screw in the center of that guy made of plastic that you can easily stripp out not knowing shes in backwards bud"Like the prop on a airplane. A pool motor is looking the same as i see here as far as seal and sealplate. No volute present for there is no pump pot.
Catching the fact that it hit the case due to damage on plastic...good eye. Very good eye. Exactly as you showed...if that seal gets hot and runs without water to cool them..or has that kind of movement allowed they have a fair reason to leak. Its porcelain im not entirely sure how it works not sure science does either but somehow it works without leaking lol...and the heat dissapation is highly pretty recommendedly decent in ceramic. Arent space shuttles made out of this coolness material?
its a tiny pool pump. h.3l yeah"
also kudos on that 3rd kick....you know u gotta redo all fuel from any purchase....but saving money on the part cleaning solution..from the crappy gas....i cant resubscribe? Upvote from me.
Love to see you making those kind of videos again. I remember 18 year old me being asolutely facinated by what you're doing. 6 year later, still facinated but I started doing similar things. You inspired me questioning buying new things and trying to salvage used. Moreover I started an apprenticeship as an industrial mechanic and now studying mechanical engeneering. Nowadays I constantly think about what I would do while watching and it became a pleasure of a diffrent kind for me. Thanks and keep going please!
Thank you for the great comment. From my point of view I'm just working on stuff. It is heartening to know that the videos may affect someone's life in a positive way. Congratulations on your accomplishments!
Glad you guys are back on track.
You’re going to love it! My co-worker had an early 2000’s GasGas EC250 and it was the smoothest and snappiest bike I’ve ever ridden. GasGas made great bikes.
As usual you did very well. Great fun to watch - many thanks for sharing.
It puts a smile in my face seeing you so genuinely happy when the bike started up
I remember you guys. Love your banter. It’s arguably better than the resto itself. Keep it up you guys are great and just shows what a good relationship can be.
Cant beat an old 2 stroke!!
Ironically enough I pretty much did the exact same thing when I got my old 99 kx250 running after 10 years with the same issue and I used a Jennie’s garage to get it running.
The bike is now completely restored and loving life ❤️
Good job on the fix. I had a '91 kx250 when I was a kid and it was lots of fun
Robotic Otters! That was a good one! The interaction between the two of you is what makes this channel. It could be about anything.
I liked your tenacity--that bike is now running great. Your knowledge is great--you deserve better tools/equipment.
Life is bleak, you bless me with an hour of bliss.
Glad you like the video. Life definitely seems brutal sometimes.
Was just thinking about you guys the other day and BAM here you are! I think you proceeded exactly as you should have. The second I saw that baby vomit oil I thought for goodness sakes don't try to crank. Bravo! Looking forward to the test drive. Soon I hope.
Sometimes on older bikes the midbody gasket swells and blocks off the pilot circuit. P.S. I liked the kickstarter solution despite it not working.
I was thinking about you guys today. So glad you’ve uploaded. Thanks ☺️
I wouldn't call myself a bearing expert, but I've dealt with them quite a bit.
There are two reasons for bearing play being a thing: One is to prevent the bearing from locking up or being harder to turn, when the metal expands due to operation in environments above room temperature. The second reason is that every functional surface is manufactured within a certain tolerance - there always needs to be a little play to account for that.
There is a DIN Standard which sanctions radial bearing play (or radial internal clearance if you're fancy). It's DIN 620-4, if you want to look it up. It defines four classes of internal clearance: C2, CN, C3 and C4, with C2 representing the smallest amount of play. CN is the standard internal clearance class - the vast majority of roller bearings that are manufactured to the DIN standard, have a CN internal clearance. The internal clearance class is only specified in the designation of the bearing, if it is not CN. Even though not every ball bearing is manufactured to the DIN 625 standard (DIN standard for ball bearings), the internal clearance specified there is going to be comparable to most roller bearings out there.
For roller bearings with a inner diameter from 6mm to 10mm, the internal clearance is specified to be between 2 and 13 micrometres. The water pump shaft bearing in the video obviously has a way higher internal clearance than that and it also sounds (and probably feels) like it has seen better days.
I love your videos, greetings from Germany :)
Thank you very much for that information! Your comment is an asset to me, and hopefully others who read it. I didn't know of those standardized specs, and I will very likely use those clearance tables in the future.
Best channel of all time!
You are very kind!
i havnt watched your videos in years, until youtube just recommended me this, I'm glad your still up to the same stuff and I hope all is going well
I could watch you fix motorcycles any day any time any where. Love the vids.
Thank you!
You guys compliment each other, don't ever become complacent of that fact.I would have drained the oil, refilled, obviously ditched the gas and cleaned carb and got some commitment from the bike before I committed to it.Could have gotten burned for 40 bucks, but that did add a suspenseful cliffhanger for us out here in couch potato land.
Hey Billy Bob, y’all ain’t going believe what the cat drugg in through the door!
Thanks for the video Jennie & Jake ! Awesome to see you guys again.
51:37 is the greatest reaction that a man can have. 😲 ITS ALIVE!!!!!! Great video as always! Love you guys!
Yes that was a great moment! Glad you like the videos>
I'm still here - so glad you guys are too. Great - fun ! Nice save. Good trouble shooting as well ! Cool to get a good Gas Gas for little money. Looking forward to the ride ...
Great video. I have been watching your videos for many years. This video seemes more like the old ones which i do like. You looked so happy when it started and idled.
Yes that was a rush when it started!!
Man, you guys are awesome. I love tinkering on engines and watch quite a few UA-cam channels around that, but you guys have the perfect comedic timing. I absolutely enjoyed this video. Thanks for the great content!
Glad you enjoyed it!
Honestly I love this “revival” type of videos so much. I m watching you for 3 days but man, 1hour! I can’t wait to watch till end. Keep going like this ✌🏼✌🏼🫶🏻
Glad you like the videos!
Your chemistry is amazing. I’m so happy you’re doing motorcycle stuff so you showed up in my feed. I wouldn’t have found you if you were doing stamp collecting (or watching paint dry) but if you were to start, I’d watch that too.
My favourite youtube channel felt like the old videos.
Water pump seals and shaft are a well known issue with the gas gas bikes . Look up Jim snell videos for all things gas gas . The pampers uses the same engine as the trials bikes.
"Somewhere between dangerous and impossible" 5:31 that's how a man's gotta live his life! Lol😅😂
"Ah! There's the seal. I wonder how it works?"
"Erk, erk! "
This is why I watch you two. 😅😅
You just crack me up.
Just as in any great show, the Star gets all of the good lines - Jennie makes me laugh out loud. Mechanical genius and comic genius makes for a fantastic combo. Hope more is coming soon...
Thank you for the kind words!
Glad to see a new video. Love u guys
Thank you!
Awesome video! Glad Jennie’s garage is back!!! More hour long dirt bike content!!
Favorite quotes
" I question the man's mechanical aptitude. "
" Zoom in so they can smell too. "😂
Im so happy, 1 hour of video this ligten up my life
If the scratches REALLY bother you.....EBAY has them coming from Slovakia... Plastic Body Kit-Brand New
$250ish
Full set of gaskets?.....WHY NOT?
They were as unsure as you what they would find, good insurance.....
Didn't see you check for plugged emulsion holes...could cause air fuel mix ratio issues....
Old gas?
Works as a10:1 mix in your old carburetor machines as well...That's how I dispose of my used motor oil too.
Excess food take out napkins filter gas well here...
Needed 3 smoke breaks for this one, your "word play" was killing me... 😏😉
Thank you for the recommendation on the plastics! Good to know they are still available. I blew out all the holes that were easily accessible on the carb. It was so clean though, I didn't take it apart any further.
Amidst a plethora of worthy contenders, "robotic otter" was the true standout comedy gem.
You guys are hilarious, actually got me into motorcycles and the confidence to work on my own
One of my absolute favorite channels
The joy on you're face when it started was priceless 😅
It's a great feeling!
OMG! So glad to see this. I need fix a drink, microwave some popcorn, go sit in front of the tv in the living room, and savor this!
I'm about 3 minutes into the video and I've got to say, that's a pretty good looking dirt bike. Not babied but not completely 100% trashed. Id say it's gonna fire and go!
I was right! What a prize little bike!
As someone who spent hours and hours trying to figure out possible problems with clapped out 2 stroke bikes, I REALLY APPRECIATE seeing what you do and how you do it. And with a really tiny tool box. You need to buy some quality tools from the profit when you sell the bikes. Just makes working on stuff alot easier and fun. I also recognize the joy you feel when a bike likes yours starts for the first time. You doubt it will be an easy fix and then you are blown away when it finally runs, and even idles. It gives you a feeling of pride over what you accomplished. I really enjoy when you do a twostroke project but ive seen you understand fourstrokes just as good. Makes me wish we were neighbours so I could learn a thing or two from you :) This video was 10 out of 10. Good job! Cant wait for the next video!
Yes it is a great feeling when it starts for the first time! Thanks for the kind words.
Hey guys
You were one of my original favorites years ago
I’m glad to see you still pop up together and happy as ever
Love you guys
I call that a win. Id like to believe I would have taken the same course of action. Thank you for another one 👍
Glad you enjoyed it!
It’s definitely worth fixing that bike. That 300cc two stroke is a GREAT motor. I used to have one. It’s so good for trails and woods riding. Its got all the torque you need for inclines. You don’t have to rev it out to make power. It just tractors right up hills.
I am really looking forward to trying it out.
All of are very happy to watch another video from jennies garage.
ahhhh I missed this happy moments videos! when it starts, your happiness is contagious man! I love watching you 2. best videos and YES you did the right steps, I think if you have started as it was, you could have ruined all.. this way you moved into a cleaning route and paid off!
Thank you for the kind words. Glad you enjoyed the video!
Out of the blue, an hour long jennies garage episode comes along. I cannot wait to consume this content. Beer and snacks in hand!
IVE MISSED THIS CHANNEL SO FREAKING MUCH!!!!!
I REALLY enjoyed that!!!! Great job, and was hooting with laughter at the banter throughout. Love a two stroke, never had one bigger than 100cc, would love a ride on one of these, great job 👍👏👏👏
Glad you liked it. I've never ridden a 300 2 stroke, and am excited to try it!
where have you bean, more vids , i miss you,.xxxxx
Can't wait for 'part II'.
I am always glad to see you guys picking up projects to work on and watch for entertainment I don’t even own all my quads or dirtbikes anymore got rid of all of them but I still like watching the videos👍🏽
I love this channel. Don't know anything about mechanical stuff but it's fun watching you do it
Another great video - true spirit of UA-cam in what you’re doing, keep ‘em coming!
Thank you!
Please put Jenny, from Jennie's garage in front of the camera more, and in a pair of daisy duke's lol. She's such a sweetheart, we all love her.
I absolutely love these videos. Thank you for sharing them with us. I immediately got the bucket/bouquet reference, too. "Hyacinth Bucket, lady of the house speaking!!" Haha! 😂. Best wishes and good health to the both of you. Thanks again!
You certainly made the right decision tackling the obvious problems before trying to see if Hard Times was a runner, IMHO. Saved trouble in the long term, and sleep in the short :)
This was Great !! Really Awesome to See this Resurrection,
And they Didn't even go to Church DOH!