Luminous inverter charging problem

Поділитися
Вставка
  • Опубліковано 28 січ 2023
  • ‪@crazyinfotechtamil‬
    #stabilizer
    #vgaued
    #inverter
    #ups
    stabilizer service in tamil
    stabilizer and inverter service
    iii
    A voltage stabilizer is a device which is used to sense inappropriate voltage levels and correct
    them to produce a reasonably stable output where the load is connected. Here we will study
    the design of a simple automatic AC voltage stabilizer which can be used for the above
    purpose. In this circuit, active and passive devices, such as diodes, transformer, resistor,
    capacitor, relay, IC etc. have been used. One step down transformer and one step up
    transformer have also been used in this work. In case the line voltage crosses a predetermined
    threshold, the comparator detects it and its output immediately goes high, switching ON the
    transistor and the relay for the desired actions. The relay contacts are appropriately integrated
    to the transformer taps for executing the above actions as per the commands given by the op
    amp output. The designed circuit operates successfully and the results obtained are
    satisfactory. When installed, the relay trips whenever the input voltage crosses 230 volts,
    bringing the output to 218 volts and keeps it until the voltage reaches higher levels. When the
    voltage drops back to 225, the relay gets de-energized pulling the voltage to 238 volts and
    maintains the difference as the voltage further goes down. The above action keeps the output
    to the appliance well between 200 to 250 volts with fluctuations ranging from 180 to 265
    volts.
    inverterKeyword:
    Inverter repairing
    PCB board Repair
    V Gaurd
    Everest
    Voltas
    Vanguard
    VG 50
    VSD 40
    Mini Crystal
    Mini Crystal Plus
    Led tv stabilizer
    Ac Stabilizer
    Fridge Stabilizer
    Inverter Ac board
    Output Problem
    Induction stove
    E1 Error
    E2 Error
    E3 Error
    E4 Error
    E5 Error
    E6 Error
    E7 Error
    Induction no power on
    Induction dead mode
    Induction display proble.
    UPS driver ic
    ISL 83202
    12 V driver Card
    Control Card
    Tata Nexon
    Batter Car
    Economic development
    Electronic Vehicle
    Kevin inverter
    Crompton inverter
    Base inverter
    Power zone inverter
    Power zone battery
    Microtek ups
    Microtek charging problem
    Ups charging Problem
    Ups Over load problem
    Battery low peoblm

КОМЕНТАРІ • 7

  • @a.m.praveenkumar619
    @a.m.praveenkumar619 10 місяців тому +1

    Smart charge continuely blenking what is the issue

    • @crazyinfotechtamil
      @crazyinfotechtamil  10 місяців тому

      batry Full charged

    • @user-of1pk8cy2i
      @user-of1pk8cy2i 2 місяці тому

      Thala va in 2 kva luminous inverter...
      When ups on it does not convert to main
      But
      When I off inverter mains coming
      What is the problem

  • @user-of1pk8cy2i
    @user-of1pk8cy2i 2 місяці тому +1

    Thala va 2 kva luminous inverter
    La
    In no main
    When i on the inverter ups mode is running but when i give main it does not convert to main
    But when i off the inverter switch the main comes