Don’t be boring, replace your color lid.

To replace the lid of a hair clipper from white to black, you can follow these simple steps:
1. **Gather Tools**: You'll need a small Phillips screwdriver to remove the screws. Make sure the screwdriver fits well to avoid stripping the screws.
2. **Power Off the Clipper**: Before starting, ensure the clipper is turned off and unplugged for safety.
3. **Locate the Screws**: Identify the four screws holding the current white lid in place. These are usually located on the top or underside of the clipper, depending on the model.
4. **Remove the Screws**: Use the Phillips screwdriver to unscrew each of the four screws. Keep the screws in a safe place, as you'll need them to attach the new lid.
5. **Take Off the White Lid**: Once all screws are removed, gently lift off the white lid from the clipper. If it feels stuck, gently wiggle it until it comes free.
6. **Position the Black Lid**: Align the new black lid with the screw holes on the clipper. Make sure it's seated properly before proceeding.
7. **Reinsert the Screws**: Place the screws back into the holes and tighten them with the screwdriver. Be careful not to overtighten, as this could crack the new lid or strip the screws.
8. **Final Check**: Ensure the lid is secure and there are no loose parts. Your clipper should now have a new black lid securely in place.
Once finished, power on the clipper to check everything is functioning correctly.