@@RecordingStudio9 I checked video. I will be need do it settings Editor same like you did ? Or I no need do it change settings Editor and just keep it how came to me WORLDE Easycontrol 9 MIDI Controller also Devine EZ-Creator USB/MIDI Controller Pad ?
I contacted them and they emailed me this, here are the drivers/editor program: For PC: en.worlde.com.cn/Private/Files/20190115112336439%E2%88%AEEasy%20control.zip For Mac: en.worlde.com.cn/Private/Files/20180922154909820%E2%88%AEEditor.app.zip
Using MIDI-OX to see what comes out of it, it works as expected only on scenes 1 and 2. But when on scenes 3 or 4, button behavior does not match what has been defined in the configuration editor. The problem does not seem to come from the Windows software because a custom configuration was uploaded to the device, then retrieved correctly after closing and reopening the software. The microcontroller firmware must be defective and does not work according to the settings that have been sent for scenes 3-4. Another annoyance is the scenes LEDs that are too bright and dazzling. It is not easy to change their brightness since they are addressed through 4-resistor array SMD, more difficult to replace without proper equipment than single resistor SMD. For now, I put some green tape to dim them. Still a cheap useful controller.
when i try to use the editor and click "send scene data" it pops up saying "finished 0%" and will not go up, and when i click it says "device isnt exist" but the computer does recognizes it because i have been able to use it in ableton. any ideas why this is happening? thanks
If there is anyone that got this working on Windows 10, will you please let me know? I'm trying to figure if I have a defective device and if someone who has the editor working on Windows 10, this will tell me it is likely.
I've figured it out: you have to turn the DAW off first (I use Ableton). So turn it off, click send scene data, it will show 0%, click okay and it will send the data (the bar will go from 0 to 100%). Worked for me at least.
I think mine has problem... Even I assign each faders and knobs to the program its still perform as default and the number 7 fader control the rest of faders like the big knobs... How it will work?
How did you get the editor to work. I downloaded from the Worlde site but can't get it to communicate with the controller. So essentially all I have is one scene and nothing and can't re configure anything. I'm running WIndows 10
Thanks, I also have an email to the manufacturer to see if they know of a problem. Not sure if it is the software or whether I have a defective controller. It sends midi data but I suspect it is not receiving sysex messages so it can dump configs. Do any lights on your controller blink when you send it a new config?
New replacement controller. Same problem. Manufacture insists it is config on my Windows 10 PC but I have two separate PC's and it doesn't work with either. As of today, they haven't been very helpful. Anyone else have success getting the editor to work on Windows 10 yet?
@@StevenCaldwell971 Right think I have solved this. It must be plugged into the USB 3.0 port of your laptop or pc, not the USB 2.0 ports (as mentioned also in it's little manual I came to realize). Try that first, then send or read. Let me know if this works for you too 😉
I honestly do not know how to use this controller. All that was in the box was the controller and the usb cable, but it isn't being recognised in my Computer. The apparent "CD" that comes with it was absent. Any help on how to set it up? Are there any installation requirements or so? What websites can run MIDI controllers?
I have the exact link and their email, but UA-cam is stricter now with links so I can't comment here, drop me your Twitter or Insta I will dm you it. Then all you need to do is set up in its editor then send the data to the controller using the editor. Make sure it's plugged into the USB 3.0 port before you do this 😀
It's a simple MIDI CC (Control Code) device, so unlike a HUI or Mackie controllers, does not support all functions, and in most cases you have to manually configure it.
RecordingStudio9.com Maybe you can help me? I'm trying to setup this controller for live use with an iPad and a midi controller keyboard. My iPad has the lightning connection to the old 5 pin midi cables, In and Out, and I'm connecting that to my controller synth. I know that this controller comes with a usb connection. What kind of adapter will I need to make this setup work? Thanks.
I was hoping you would go into more detail as to what the "values" and numbers mean and what they control. I bought a WORLDE Easycontrol 9 MIDI Controller, knowing I needed one, but I'm having difficulty finding a tutorial that helps me understand just how to use it. Can you maybe do a tutorial for us novices who are being introduced to using a midi controller for the first time?
I contacted them and they emailed me this, here are the drivers/editor program: For PC: en.worlde.com.cn/Private/Files/20190115112336439%E2%88%AEEasy%20control.zip For Mac: en.worlde.com.cn/Private/Files/20180922154909820%E2%88%AEEditor.app.zip
Hi Thanks for your video - Have just received the controller and trying to use with a mac pro running el capitian. Unfortunately, there is no plug and play like the other midi controllers that are working fine. The Worlde site dose note load in English and can not find the mac driver if that is what is needed anywhere else. Could you please help me with the driver or some other advice. Kind Regards Clint Hurrell
Yes, and it is a lot easier than controlling a DAW with it. In the synth's user manual there should be a table that shows what controller (CC "continuous controller") the various parameters of the synth respond to. So, for example, the master volume is universally defined as CC-7. So, in the Worlde software, if you assign the 9th fader to send messages for CC-7, then that fader will control the master volume on the synth with the 128 continuous values it is able to send (0-127, 0 wioll be "off" and the values between 1 and 127 will represent incremental increases in "volume"). You can program every fader, knob, and switch to send a different type of controller message for which each will have a different CC-value (obviously, things on the synth that have "on-off switches"should be assigned to a switch and not a knob or fader). Most synths respond to more than 18 "real" continuous controller values (i.e., 0-127) for all of the things that can be MIDI controlled, but the nine faders and nine knobs you have on the controller can be used to send messages to control the important things like, filter cutoff, resonance amount, envelope parameters, etc. It is really easy once you have a basic understanding of what MIDI is and how it works. This is a lot easier than it may sound until you actually get down to doing it.
I contacted them and they emailed me this, here are the drivers/editor program: For PC: en.worlde.com.cn/Private/Files/20190115112336439%E2%88%AEEasy%20control.zip For Mac: en.worlde.com.cn/Private/Files/20180922154909820%E2%88%AEEditor.app.zip
Hi Thank you for the video. The left side slider and buttons and rotary cannot be edited. Then how are they used or used what for? Especially the slider I am curious for what that wouold be used for? Thank you!!
If you want to use this with Logic Pro X, you can add it as Mackie HUI HUI and then use the Logic Pro Learn on control surfaces to configure all the sliders, mutes and transport. I haven t worked out how to use the rotary button yet! Worlde support are helping me get the editor to work.
Very helpful, thanks! Question: Can the knobs be pushed as a button, as well as turned? Such as the Behringer MIDI allows? It would be nice to be able to push them to reset.
The Mac OS version lacks a scene-saving option, rendering the device frustrating and seemingly impractical. Ideally, I want to disable all controls to prevent accidental adjustments, but the software only offers "read scene data" and "send scene data," which are currently non-functional. I'm reaching out to support about this issue. Running Monterey may be the cause, but it seems impractical not to support a 2021 OS. I'll update you on my findings.
With non-motorised surface control devices, best to write the automation with them, and then set to read automation in your DAW. This way recall is not a problem.
+cucho_green Sorry, don't have one to help you our. But here is the link to the manual. www.worlde.com.cn/downloadsfront.do?method=picker&flag=all&id=d28a4c7b-648f-4c5e-b14e-6f971b29d665&fileId=01fbfa10-d6a1-4705-99ff-bb418c38b6bb&isDownloadPermissions=true
Hey, a late response may be better than none at all, right? Umm.. you need to make sure the device is connected and that no other DAW/app is using it right now. You also would benefit from installing drivers manually for your device. My OS installed them automatically (win8.1) but you may need to do it manually. Also try win 8.1 or lower compatibility mode.
@@GraphixPlusAU try the usb 3.0 port directly (not using usb hubs, plug straight into the usb 3.0 port of your laptop or pc) plug that in first there then send or read 😀 mine was doing this too before I realized it had to be plugged into the USB 3.0 port 😂 also if any one needs the driver I can send the link directly from their page to the download (they set it to private which is why it's so hard to find), they sent it to me when I asked them, but can't link it here on UA-cam because it doesn't let me, but let me know if you need it 😉
How are you i have an ipad plus i use the midi puc interface ,i just received my easy control what all do i need to have to be able to control it ?do i need a usb hub or lighting cable to usb ?
so for using this with H/ware synths...each scene can only access 1 MIDI ch at a time. Qn: So 4 MIDI channels total.... unless you go in connect to laptop and edit the scene or load them in again?
@@joelstephensequeira8309 I find that cross fader slider thing works when I click the learn feature on a vst and the knob seems to scroll through vst presets
It depends on your specific requirements, but I think think this would be useful for radio shows, so long as your mixing software accepts midi. It is definitely going to be cheaper than specialised mixers.
I think this is a basic one but I want clarifications. I hope youll help me. Can I assisgn a specific sound (eg. Strings, synth) controling its volume and be easily added to my piano sound by it?
Do you know how to use the Worlde Panda MINI? I can't figure it out how to use it, please I would thanks yo a lot if you teach me. I allready have the manual, but I didn't understood it.
+RecordingStudio9.com ok, I plugged in to mi MacBook and I used it with garageband, but that app doesn't let me to put some effects or sounds to the MIDI buttoms (The 8 Pads), maybe you know another program that is better for this products, that you could recommend to me, THANK YOU SO MUCH for answered me.
+Benjamin Vial (vialbenja) I have never used GarageBand and I don't have experience recording any MIDI or effects. Do a UA-cam search and I'm sure there are lot of videos describing and showing how to record MIDI with effects? I have GarageBand on my iMac, but never had the time to use it. Maybe one day...
I use Sonar Platinum. First bank in Easycontrol 9 configuring perfect, but I don't make the same with other 3 banks. What's wrong in your opinion? Have you all 4 banks working well?
+Ben Holt I'm not sure it has the mapping template, as it did not come with any software of files. But it would not be hard to create your own mapping template within Ableton. I don't own Ableton, so cannot comment on how to achieve this.
Hi brought it today , so nice video One question sir When I map 7th fader to the7th track volume even when I move the cross fader thus 7th track will move ....Y is it sir and same in that big silver knob when I map 8th track volume fader even that big silver knob gets controlled....so where can I assign my master volume of my DAW....to the cross fader Ryt but it isn't letting me do.
or can anyone help...im tryig to use the buttons under the slider as voice assigned for mks sensations but they WONT STAY ON!! I HAVE TO HOLD THEM DOWN TO GET SOUND ...ANYBODY PLEASE HELP!!!!
I use the easy control 9 for an M-Audio 88 key with Ableton Live. when assigning the mixers and toggle buttons, they mix up their control numbers and come up controlling other parameters in the software. I guess I need to play more with the controller.
How, exactly, would you propose doing that? On the other hand, I see no reason why you couldn't use two or more of them plugged into different USB ports. You would just have to make sure that there were no conflicts, but I'm not sure whether even that would make a difference (I have multiple controller keyboards on different USB ports controlling the same synth and the synth doesn't seem to have any problem with that when I kind of do the Ray Manzarek thing.
Dm me on Twitter or Insta, it won't let me send any links here, I have the direct link from their site, I contacted them, it's set to private which is why it's not searchable (have no idea why lol)
Hi, thanks for the great review! I just have one question: I'm on bank 1 and I have 8 assigned faders (track 1 to 8) and I'll change to bank 2 and assign 8 more (track 9 to16). But, when I change to bank 2 will my settings disappear - since the positions are set for bank 1?
Yes, that is because the faders are not motorised to move back and forth to the positions of the faders in your DAW. This MIDI controller is great for VST Synth sound creation. Not the best for audio mixing option.
The Logic user manual should tell you what CC-value each of the transport controls responds to and whether or not a "momentary" or "switched" mode of operation is required.
No but you might want to check out bome.com and their Midi translator, it is quite flexible and can often be used to extend the capabilities of a midi controller.
I tried your download and it didnt work, so I went to Worlde site and it didnt work either so I emailed them, and a nice lady Ivy sent me a new version to work with Catalina within an hour, I put it up and it works fine so I have ordered the controller. Was going for a Korg NanoKontrol 2 which is extremely similar but out of stock everywhere and this is cheaper.
@@robertj1303 Hey could you let me know the link she sent you? I can't seem to get the software from the Worlde website to work either - would really appreciate it. Thanks!
Does it do what it says? Yes. Is it a good price? Yes, for what it does. Are there better ones? Yes, you pay extra. For simple automation write in, works fine.
I tried using that software on El Capitan and it doesn't work. It's not compiled properly so I had to do that myself. Then after doing that it freezes everytime trying to send or receive midi settings to and from the device. I contacted support over a month ago and have heard absolutely nothing - Be careful if you are on mac and need to edit the controls on this product.
Hi! Do you or does anyone using this controller have a version of the editor that works with OSX 10.9.5? I would be really thankful if you can share it with me.Thanks!!
+RecordingStudio9.com Thank you so much for the quick reply! Unfortunately the software does`t work on my system. I use for some years the nanoKontrolMyr midi script with a korg nanoKontrol and i was hoping to do the same with this controller, but since i can`t change the CC`s on the device it will not be possible. Thanks!
HiRS9, I just got the Easypad 12, so this review was really useful, thanks. One issue with it is when reading or sending info, a pop up comes up and says "Device isn't exist.", even though I can play with the preset values? So trying to set Scene 2 isn't working. Any ideas on a fix? Thanks.
It won't work correctly with USB 2.0 ports. Try using your usb cable only in the USB 3.0 port of your pc or laptop and always plug it directly into a port rather than using usb hubs, then try. Let me know if this works for you too 😀
@@nicolesproducerpack It does work with USB 2.0 ports - it's working fine on my (ancient Win8.1 DellPC) system using the standard USB 2.0. Some devices don't install properly when you add them to a USB port and you need to select a different one. It seems to be one of those quirks of Windows...
Nice video. Thanks for posting! Two things I didn't see 1)USB connector, looks like it is either microusb or mini usb on the controller end but could not tell from the video. 2) Is there a way you can control the state of the button leds remotely? I just ordered on so when it comes, maybe I can answer my own questions.
1) Yes, it is micro USB and a lead should come with the unit. 2) No, so if you set a button as track solo, when you press the button, it will solo the track, but if you click in your DAW to disengage solo, the button light stays on, and vice versa. I wish it did though, then it will be in sync with your DAW. hope this helps.
I use it to control my sub-mix channels for my final mixdown, and it does a great job. As it is not have motorised faders, you need to start from 0db slider setting and do the mixing in one session.
I never thought about that but I'm right-handed and that's where I would have put it. Why would it be preferable to put it on the right? Maybe in the center, maybe?
Hey sir I NEED YOU HELP ASAP do you have a private email so i can send you my number or something.?? i have a church convention this week and have a ? about the function of the PD30
@@SpheniMoo Do you have something like Generic Remote on there like Cubase does? That's how I did mine. I clicked on the learn, moved the slider button or knob, and then it assigned the cc in Cubase
get the manual at the following link below, Once you open the link the pdf. downloads... www.worlde.com.cn/downloadsfront.do?method=picker&flag=all&id=c4dea000-fe93-405e-b484-1c355c102b63&fileId=87108b35-f7d7-4602-bbbc-26ceb8ca2e4c
Can you send me link for download driver please ?
Link in the video description.
@@RecordingStudio9 ok thanks I have another Devine EZ-Creator Pad that's same installation ?
@@RecordingStudio9 I checked video. I will be need do it settings Editor same like you did ? Or I no need do it change settings Editor and just keep it how came to me WORLDE Easycontrol 9 MIDI Controller also Devine EZ-Creator USB/MIDI Controller Pad ?
I contacted them and they emailed me this, here are the drivers/editor program: For PC: en.worlde.com.cn/Private/Files/20190115112336439%E2%88%AEEasy%20control.zip
For Mac: en.worlde.com.cn/Private/Files/20180922154909820%E2%88%AEEditor.app.zip
Using MIDI-OX to see what comes out of it, it works as expected only on scenes 1 and 2. But when on scenes 3 or 4, button behavior does not match what has been defined in the configuration editor. The problem does not seem to come from the Windows software because a custom configuration was uploaded to the device, then retrieved correctly after closing and reopening the software. The microcontroller firmware must be defective and does not work according to the settings that have been sent for scenes 3-4.
Another annoyance is the scenes LEDs that are too bright and dazzling. It is not easy to change their brightness since they are addressed through 4-resistor array SMD, more difficult to replace without proper equipment than single resistor SMD. For now, I put some green tape to dim them.
Still a cheap useful controller.
Can you please make a video on how to set it up? Thanks in advance!
Can you use it on cakewalk?
when i try to use the editor and click "send scene data" it pops up saying "finished 0%" and will not go up, and when i click it says "device isnt exist" but the computer does recognizes it because i have been able to use it in ableton. any ideas why this is happening? thanks
Having you figured it out? Im having the same issue.
no i haven't.
Any luck there yet?
If there is anyone that got this working on Windows 10, will you please let me know? I'm trying to figure if I have a defective device and if someone who has the editor working on Windows 10, this will tell me it is likely.
I've figured it out: you have to turn the DAW off first (I use Ableton). So turn it off, click send scene data, it will show 0%, click okay and it will send the data (the bar will go from 0 to 100%). Worked for me at least.
I think mine has problem... Even I assign each faders and knobs to the program its still perform as default and the number 7 fader control the rest of faders like the big knobs... How it will work?
I have a similar issue! Using with Kontakt the slider 5 controls de main volume and slider 8 controls the pan, but I like this controller!
Did you click send scene data under Communications tab after to send it to the controller?
How did you get the editor to work. I downloaded from the Worlde site but can't get it to communicate with the controller. So essentially all I have is one scene and nothing and can't re configure anything. I'm running WIndows 10
I have not run the software on my Windows 10 as I don't use it that often any more. I will try later and let you know how I go.
Thanks, I also have an email to the manufacturer to see if they know of a problem. Not sure if it is the software or whether I have a defective controller. It sends midi data but I suspect it is not receiving sysex messages so it can dump configs. Do any lights on your controller blink when you send it a new config?
New replacement controller. Same problem. Manufacture insists it is config on my Windows 10 PC but I have two separate PC's and it doesn't work with either. As of today, they haven't been very helpful. Anyone else have success getting the editor to work on Windows 10 yet?
Did you ever resolve Steven? I'm having the same problem. Tried on 2 Win10 PCs too
@@StevenCaldwell971 Right think I have solved this. It must be plugged into the USB 3.0 port of your laptop or pc, not the USB 2.0 ports (as mentioned also in it's little manual I came to realize). Try that first, then send or read. Let me know if this works for you too 😉
thanks for the indept review of this nice little device. you explained it all very well.
I honestly do not know how to use this controller. All that was in the box was the controller and the usb cable, but it isn't being recognised in my Computer. The apparent "CD" that comes with it was absent. Any help on how to set it up? Are there any installation requirements or so? What websites can run MIDI controllers?
Darth Revan watch the video he explains all this!!
I have the exact link and their email, but UA-cam is stricter now with links so I can't comment here, drop me your Twitter or Insta I will dm you it. Then all you need to do is set up in its editor then send the data to the controller using the editor. Make sure it's plugged into the USB 3.0 port before you do this 😀
Thanks its very informative. I plan to buy this controller.
I got this unit .
But I cant setup this with cubase 5.1
Any idea?
I'll see what I can do. I don't have Cubase 5.1, but It might be similar to 8.5. I'll make a video soon.
RecordingStudio9.com
I can configure faders... But transport and bank didnt work. And the big knob is not working.
It's a simple MIDI CC (Control Code) device, so unlike a HUI or Mackie controllers, does not support all functions, and in most cases you have to manually configure it.
RecordingStudio9.com Maybe you can help me? I'm trying to setup this controller for live use with an iPad and a midi controller keyboard. My iPad has the lightning connection to the old 5 pin midi cables, In and Out, and I'm connecting that to my controller synth. I know that this controller comes with a usb connection. What kind of adapter will I need to make this setup work? Thanks.
Use Generic Remote, it has the learn box you can tick, then move the slider knob or button so it will assign the cc in Cubase from the controller 😄
I was hoping you would go into more detail as to what the "values" and numbers mean and what they control. I bought a WORLDE Easycontrol 9 MIDI Controller, knowing I needed one, but I'm having difficulty finding a tutorial that helps me understand just how to use it. Can you maybe do a tutorial for us novices who are being introduced to using a midi controller for the first time?
Thanks for the comment. I'll see what I can do and how much time I have to create the tutorial.
Hi Just bought this thing.. Where can I download that midi editing software.. worlde website is down, so I cant download it
Private message me your email and I'll email you a copy I have.
I contacted them and they emailed me this, here are the drivers/editor program: For PC: en.worlde.com.cn/Private/Files/20190115112336439%E2%88%AEEasy%20control.zip
For Mac: en.worlde.com.cn/Private/Files/20180922154909820%E2%88%AEEditor.app.zip
@@nicolesproducerpack The PC link, at least, is now broken!
Hi Thanks for your video - Have just received the controller and trying to use with a mac pro running el capitian. Unfortunately, there is no plug and play like the other midi controllers that are working fine.
The Worlde site dose note load in English and can not find the mac driver if that is what is needed anywhere else. Could you please help me with the driver or some other advice. Kind Regards Clint Hurrell
UA-cam won't allow links in comments for some reason what's your Twitter or Insta?
It is possible to control an electrical keyboard with this controller?
I have a Yamaha MODX8 and i am searching for a good midi controller…
Yes, and it is a lot easier than controlling a DAW with it. In the synth's user manual there should be a table that shows what controller (CC "continuous controller") the various parameters of the synth respond to. So, for example, the master volume is universally defined as CC-7. So, in the Worlde software, if you assign the 9th fader to send messages for CC-7, then that fader will control the master volume on the synth with the 128 continuous values it is able to send (0-127, 0 wioll be "off" and the values between 1 and 127 will represent incremental increases in "volume"). You can program every fader, knob, and switch to send a different type of controller message for which each will have a different CC-value (obviously, things on the synth that have "on-off switches"should be assigned to a switch and not a knob or fader). Most synths respond to more than 18 "real" continuous controller values (i.e., 0-127) for all of the things that can be MIDI controlled, but the nine faders and nine knobs you have on the controller can be used to send messages to control the important things like, filter cutoff, resonance amount, envelope parameters, etc. It is really easy once you have a basic understanding of what MIDI is and how it works. This is a lot easier than it may sound until you actually get down to doing it.
@@mosspa1 thanks!
Nice review and run through of the features. Cheers.
Glad it was helpful!
And what is that big silver knob used for
For me it seemed to scroll through the vst presets
Hi do you know how to reverse the faders? id like to control a hammond organ drawbaers but seems like they are inverted...
My guess would be to use the editor software to set upper and lower limits reversed.
You should be able to do that in the organ software midi settings. I use Hammond B3X for iPad and there is a setting for reversing the drawbars.
Hi! Where can I download the easycontrol editing software? I did not find anything on the worlde web site
+RM Music
You can download a copy from my website www.recordingstudio9.com
I contacted them and they emailed me this, here are the drivers/editor program: For PC: en.worlde.com.cn/Private/Files/20190115112336439%E2%88%AEEasy%20control.zip
For Mac: en.worlde.com.cn/Private/Files/20180922154909820%E2%88%AEEditor.app.zip
@@nicolesproducerpack Would you happen to still have the mac file around? The workde site doesn't have it any more...
hello my Easy control editor doesnt work on Mac High sierra, pleas ya can help me?
Hi Thank you for the video. The left side slider and buttons and rotary cannot be edited. Then how are they used or used what for? Especially the slider I am curious for what that wouold be used for? Thank you!!
They each have a set Midi CC codes you can map in your DAW
If you want to use this with Logic Pro X, you can add it as Mackie HUI HUI and then use the Logic Pro Learn on control surfaces to configure all the sliders, mutes and transport. I haven t worked out how to use the rotary button yet! Worlde support are helping me get the editor to work.
Very helpful, thanks!
Question: Can the knobs be pushed as a button, as well as turned? Such as the Behringer MIDI allows? It would be nice to be able to push them to reset.
Not that I'm aware of. No
great review
The Mac OS version lacks a scene-saving option, rendering the device frustrating and seemingly impractical. Ideally, I want to disable all controls to prevent accidental adjustments, but the software only offers "read scene data" and "send scene data," which are currently non-functional. I'm reaching out to support about this issue. Running Monterey may be the cause, but it seems impractical not to support a 2021 OS. I'll update you on my findings.
With non-motorised surface control devices, best to write the automation with them, and then set to read automation in your DAW. This way recall is not a problem.
@@RecordingStudio9 Thank you! That's what I ended up doing. It's so much less headache.
@logancain motorised faders can cost 10 times or more, so you compromise 😊
will this work with windows 10 and with ableton?
hi! do you know anything about the Worlde Panda MINI? i cant seem to figure out how to use it! any tips? thanks
+cucho_green
Sorry, don't have one to help you our. But here is the link to the manual. www.worlde.com.cn/downloadsfront.do?method=picker&flag=all&id=d28a4c7b-648f-4c5e-b14e-6f971b29d665&fileId=01fbfa10-d6a1-4705-99ff-bb418c38b6bb&isDownloadPermissions=true
Got the driver finally.. The driver freeze when I click on the Send Scene Data button.. Advise?
I have the same problem. Did you ever resolve? Windows 10?
how to solve the problem ??
Hey, a late response may be better than none at all, right?
Umm.. you need to make sure the device is connected and that no other DAW/app is using it right now. You also would benefit from installing drivers manually for your device. My OS installed them automatically (win8.1) but you may need to do it manually. Also try win 8.1 or lower compatibility mode.
Or watch my updated video on the topic.
@@GraphixPlusAU try the usb 3.0 port directly (not using usb hubs, plug straight into the usb 3.0 port of your laptop or pc) plug that in first there then send or read 😀 mine was doing this too before I realized it had to be plugged into the USB 3.0 port 😂 also if any one needs the driver I can send the link directly from their page to the download (they set it to private which is why it's so hard to find), they sent it to me when I asked them, but can't link it here on UA-cam because it doesn't let me, but let me know if you need it 😉
Is it posible to use that thing with 2 midi controllers at the same time. I mean to turn on 2 "rec buttons set" at the same time?
I am having trouble setting up a worlde easycontrol.9 inside presonus studio one 3.
Can you help me with this?
This is an old one, but the concept is the same. ua-cam.com/video/x-K4DWinaL4/v-deo.html
Im having no luck setting up the Easycontrol9 inside Studio One. Could you help me with this?
@@danalee2619 Do you have something like Generic Remote on there like Cubase? This might help ua-cam.com/video/aqn-zSXtRfg/v-deo.html
How are you i have an ipad plus i use the midi puc interface ,i just received my easy control what all do i need to have to be able to control it ?do i need a usb hub or lighting cable to usb ?
Dumb question but how do you hook this up? the usb cable goes where to where?
From the unit to the back of your computer usb socket.
You're correct, it is a really dumb question. Since you have correctly identified the wire as a USB cable, I think you are a troll!
so for using this with H/ware synths...each scene can only access 1 MIDI ch at a time.
Qn: So 4 MIDI channels total.... unless you go in connect to laptop and edit the scene or load them in again?
I'm wondering if the volume control outputs midi -- even if you can't edit what midi it sends?
Yes, all data is in MIDI CC system messages. For the master volume, the CC code is set to default CC for Master Volume.
So which is the master volume? The cross fader??? I can't map the cross fader and the big silver knob y
@@joelstephensequeira8309 ever get an answer for this?
@@joelstephensequeira8309 I find that cross fader slider thing works when I click the learn feature on a vst and the knob seems to scroll through vst presets
@@joelstephensequeira8309 I'm still waiting for mine to come in but I believe the 9th fader is sending CC-7 (Master volune)
Hey, Is there other Radio controller not for DJ music but mostly for Radio presenter...
It depends on your specific requirements, but I think think this would be useful for radio shows, so long as your mixing software accepts midi. It is definitely going to be cheaper than specialised mixers.
I think this is a basic one but I want clarifications. I hope youll help me. Can I assisgn a specific sound (eg. Strings, synth) controling its volume and be easily added to my piano sound by it?
Do you know how to use the Worlde Panda MINI? I can't figure it out how to use it, please I would thanks yo a lot if you teach me. I allready have the manual, but I didn't understood it.
+Benjamin Vial (vialbenja)
I do not own a Worlde Panda Mini, but what you don't understand? How it works, how to connect, how to setup?
+RecordingStudio9.com ok, I plugged in to mi MacBook and I used it with garageband, but that app doesn't let me to put some effects or sounds to the MIDI buttoms (The 8 Pads), maybe you know another program that is better for this products, that you could recommend to me, THANK YOU SO MUCH for answered me.
+Benjamin Vial (vialbenja)
I have never used GarageBand and I don't have experience recording any MIDI or effects. Do a UA-cam search and I'm sure there are lot of videos describing and showing how to record MIDI with effects?
I have GarageBand on my iMac, but never had the time to use it. Maybe one day...
Is the editor program safe to download in 2022?
As safe as it ever was.... As save as it ever was ... As safe as it ever was
works like the akai midimix? or is its use completely different?
No clue, sorry.
I use Sonar Platinum. First bank in Easycontrol 9 configuring perfect, but I don't make the same with other 3 banks. What's wrong in your opinion? Have you all 4 banks working well?
Hi +RecordingStudio9.com
Do you know - Is it already mapped to ableton? I mean mapped to volume and pan and record arm / mute / solo
Thanks!
+Ben Holt
I'm not sure it has the mapping template, as it did not come with any software of files. But it would not be hard to create your own mapping template within Ableton. I don't own Ableton, so cannot comment on how to achieve this.
RecordingStudio9.com Thanks for getting back to me!
Hi brought it today , so nice video
One question sir
When I map 7th fader to the7th track volume even when I move the cross fader thus 7th track will move ....Y is it sir and same in that big silver knob when I map 8th track volume fader even that big silver knob gets controlled....so where can I assign my master volume of my DAW....to the cross fader Ryt but it isn't letting me do.
Joel Stephen Sequeira u r not supposed to play with the master volume
those buttons under the faders what they do they solo or mute or what?
Do you know why read/send scene data doesn't work?
Figured it out. Had to turn the DAW off first. Then it works.
The Max
Yes, that helps lol
@@RecordingStudio9 didn't work for me for some reason. I can't seem to do the read/send at all
@@rossanocariello9068 This video might help you ua-cam.com/video/rAX1nDAZn0c/v-deo.html
hello sir.... can it be used in FL studio and ableton to control your the mixers?
Yes, it is possible.
or can anyone help...im tryig to use the buttons under the slider as voice assigned for mks sensations but they WONT STAY ON!! I HAVE TO HOLD THEM DOWN TO GET SOUND ...ANYBODY PLEASE HELP!!!!
+b hurd
You can use the software to change the settings from momentarily to toggle.
Hello. Where to download the easycontrol 9 editor. I cannot find the program. Thanks
A download link available on my website recordingstudio9.com
Thanks so much. Got it!
I use the easy control 9 for an M-Audio 88 key with Ableton Live. when assigning the mixers and toggle buttons, they mix up their control numbers and come up controlling other parameters in the software. I guess I need to play more with the controller.
@@RecordingStudio9 Why did you remove it. You have referenced it at least six times in this thread!
Cam you connect 2 together?
How, exactly, would you propose doing that? On the other hand, I see no reason why you couldn't use two or more of them plugged into different USB ports. You would just have to make sure that there were no conflicts, but I'm not sure whether even that would make a difference (I have multiple controller keyboards on different USB ports controlling the same synth and the synth doesn't seem to have any problem with that when I kind of do the Ray Manzarek thing.
where did you download your driver? I cannot find it from google. Thanks a lot
+Kanin Maneepairoj
Visit my website to download a copy.
I don't know where on your website. Could you please paste the link here? Thank you
en.worlde.com.cn/down.aspx?TypeId=20&FId=t14:20:14 here?
Dm me on Twitter or Insta, it won't let me send any links here, I have the direct link from their site, I contacted them, it's set to private which is why it's not searchable (have no idea why lol)
Hi, thanks for the great review!
I just have one question: I'm on bank 1 and I have 8 assigned faders (track 1 to 8) and I'll change to bank 2 and assign 8 more (track 9 to16). But, when I change to bank 2 will my settings disappear - since the positions are set for bank 1?
Yes, that is because the faders are not motorised to move back and forth to the positions of the faders in your DAW. This MIDI controller is great for VST Synth sound creation. Not the best for audio mixing option.
Thanks for the reply
Would you please tell me how to set up transport in logic x... thank you
I currently don't own Logic Pro X, as I no longer use my Mac.
The Logic user manual should tell you what CC-value each of the transport controls responds to and whether or not a "momentary" or "switched" mode of operation is required.
Hi, Can this use the mackie protocol
+Deesound Karaoke Videos not that I'm aware of
No but you might want to check out bome.com and their Midi translator, it is quite flexible and can often be used to extend the capabilities of a midi controller.
hi...can i use this for play live music with MainStaige (Logic ProX) thanks
Hi can anyone help me play
I don’t understand the values (upper and lower ) how do I know what to set them to ?
thanks
got one of these from swamp - amazing but can no find the software to reassign the functions
+Grumpy Frog Productions
Here is a link on my web site to download it recordingstudio9.com/about/download/
I tried your download and it didnt work, so I went to Worlde site and it didnt work either so I emailed them, and a nice lady Ivy sent me a new version to work with Catalina within an hour, I put it up and it works fine so I have ordered the controller. Was going for a Korg NanoKontrol 2 which is extremely similar but out of stock everywhere and this is cheaper.
Great to know it worked out
@@robertj1303 Hey could you let me know the link she sent you? I can't seem to get the software from the Worlde website to work either - would really appreciate it. Thanks!
@@rossanocariello9068 Attention Ivy email sales@worlde.com.cn and tell her your problem, she sorted me out and sent me the software
Does it work with FL studio?
It's general MIDI Controller, so I assume yes.
can send the values of the file DATE? The program itself is frozen
Worlde EasyControl Editor Software Demo under Windows 10 ua-cam.com/video/rAX1nDAZn0c/v-deo.html
i have windows 7 64.
Did you even watch the video?
I watched the video, how is it related to the fact that the program is frozen?
ArthyBog ArthyBog
How is it that that’s my problem! Contact the manufacturer
Can you use it on Mainstage, Mac OS?
с PRO TOOLS 12 БУДЕТ РАБОТАТЬ КОНТРОЛЛЕР?
No clue as I don’t use Pro Tools.
Is possible use for windows mixer?!
What does that even mean?
Can i use this with my IPAD in apps like mksensation and sampletank?
Work on ipad?
Is it worth $49 for the quality and what it does?
Does it do what it says? Yes.
Is it a good price? Yes, for what it does.
Are there better ones? Yes, you pay extra.
For simple automation write in, works fine.
Hi, is this compatible with Mac OS? thanks alot. God bless
Yes, you can use the unit with Mac OSX, but not the programming software.
uhmm, can i use it for mainstage 3? thanks men
I guess you can use it to control some of the Synth sound edits while creating sounds in Mainstage 3.
I don't know if this works, I'm on PC, but there is some editing software for Mac OS listed here.
en.worlde.com.cn/down.aspx?TypeId=20&FId=t14:20:14
I tried using that software on El Capitan and it doesn't work. It's not compiled properly so I had to do that myself. Then after doing that it freezes everytime trying to send or receive midi settings to and from the device. I contacted support over a month ago and have heard absolutely nothing - Be careful if you are on mac and need to edit the controls on this product.
Hi! Do you or does anyone using this controller have a version of the editor that works with OSX 10.9.5? I would be really thankful if you can share it with me.Thanks!!
+VOIG7
I do have a copy of both versions available on my web site recordingstudio9.com/about/download/
Hope this helps.
+RecordingStudio9.com Thank you so much for the quick reply! Unfortunately the software does`t work on my system. I use for some years the nanoKontrolMyr midi script with a korg nanoKontrol and i was hoping to do the same with this controller, but since i can`t change the CC`s on the device it will not be possible. Thanks!
HiRS9, I just got the Easypad 12, so this review was really useful, thanks. One issue with it is when reading or sending info, a pop up comes up and says "Device isn't exist.", even though I can play with the preset values? So trying to set Scene 2 isn't working. Any ideas on a fix? Thanks.
It won't work correctly with USB 2.0 ports. Try using your usb cable only in the USB 3.0 port of your pc or laptop and always plug it directly into a port rather than using usb hubs, then try. Let me know if this works for you too 😀
@@nicolesproducerpack It does work with USB 2.0 ports - it's working fine on my (ancient Win8.1 DellPC) system using the standard USB 2.0. Some devices don't install properly when you add them to a USB port and you need to select a different one. It seems to be one of those quirks of Windows...
Are you still using this? If so, how are you liking it?
I still have it, but don’t use it that often. Make sure you watch my follow up video on the unit.
Hey Can you help me in mapping this on to Fl studio please
Does it not detect anything when you click read and write on a vst? Does it have a section in FL where you can use the learn feature or on vsts? 😎
recognized as usb midi device from windows 10 64bit ?
It should, as it is a compliant device and no drivers required.
HELLO!!
How is the quality?
+Alex Quintero
Does what it says, but It's all plastic
Nice video. Thanks for posting!
Two things I didn't see
1)USB connector, looks like it is either microusb or mini usb on the controller end but could not tell from the video.
2) Is there a way you can control the state of the button leds remotely?
I just ordered on so when it comes, maybe I can answer my own questions.
1) Yes, it is micro USB and a lead should come with the unit.
2) No, so if you set a button as track solo, when you press the button, it will solo the track, but if you click in your DAW to disengage solo, the button light stays on, and vice versa. I wish it did though, then it will be in sync with your DAW.
hope this helps.
Actually it is mini USB not micro USB.
Hi! )
Please, tell me does it works good in x64 systems? )
+Jenya Melnikoff
Yes, the editing software will run on 64bit Windows. As in my video, all my operating systems of Windows are 64Bit.
Hope this answers
RecordingStudio9.com thanks a lot for the info! )
Can it work with FL studio??
Pls reply..... It's urgent
Nice video. I quite like the look of this one aesthetically to the Korg NanoControl 2.
Very informative.
Thanks man.
I use it to control my sub-mix channels for my final mixdown, and it does a great job. As it is not have motorised faders, you need to start from 0db slider setting and do the mixing in one session.
What genius put the crossfader on the left roflol.
A Left Handed person LOL
I never thought about that but I'm right-handed and that's where I would have put it. Why would it be preferable to put it on the right? Maybe in the center, maybe?
Is the PANDA200 a rip off does anyone own it
Behringer!
Thank you for the video.
If I could know the process to control a solo track, it would be great !
are the knobs/sliders/faders motorized?
No, they are simple sliders. Motorized faders can be very expensive. This is not the best device for DAW song mixing.
Hey sir I NEED YOU HELP ASAP do you have a private email so i can send you my number or something.?? i have a church convention this week and have a ? about the function of the PD30
really hope someone would make a tutorial on how to make this thing work on pro tools.... because i;m losing my mind right now with my easy control.
Which edition of ProTools? As ProTools First does not support any Control Surface.
@@RecordingStudio9 currently using Pro Tools 12 and I don't seem to make it work with HUI setup
@@SpheniMoo Do you have something like Generic Remote on there like Cubase does? That's how I did mine. I clicked on the learn, moved the slider button or knob, and then it assigned the cc in Cubase
@@SpheniMoo This might help? ua-cam.com/video/BuPcAxE1PAs/v-deo.html
@@nicolesproducerpack what's that?
thx!
hey there is there any possible way you can donate any new or used midi keyboard controller ?please and thank you for your time
get the manual at the following link below, Once you open the link the pdf. downloads...
www.worlde.com.cn/downloadsfront.do?method=picker&flag=all&id=c4dea000-fe93-405e-b484-1c355c102b63&fileId=87108b35-f7d7-4602-bbbc-26ceb8ca2e4c
Thanks. The comment in my video was about including the manual in the box, rather than one searching for it on a web site.
I am having a hard time to get pro tools to work with it ..I wana brake this shit...lol
I have never tried to use it with my Pro Tools, if I do, hopefully before you break it, I'll keep you informed. lol
This may help ua-cam.com/video/BuPcAxE1PAs/v-deo.html
Why bother. Pro Tools comes broken right out of the box!
Sobrang daldal😢
After 8 month the masterfader begins to give signals , bad quality.
Ergh! Get to the point man!