Hello @bentheremedia3011, Thank you for reaching out with your inquiry regarding the Sony A7S III. Please note that the Sony A7S III does not support 4K 120p output via its HDMI port. While it offers exceptional video capabilities, including impressive 4K resolution and high frame rates up to 60fps, however 4K at 120 frames per second (fps) is not currently supported through the HDMI output. If you have any further questions or need assistance with any other features of the Sony A7S III, please feel free to ask. ATOMOS
Hello @NickMirro, Thanks for the comment! Please note that the Ninja V Plus supports recording at 30 fps in standard and raw formats. It also supports 120p, but only as raw. If your camera can output these frame rates, the Ninja V Plus will be compatible. If you have any further questions or need assistance, please feel free to reach out. ATOMOS
@@AtomosChannel I did submit a question to Atomos on this a few weeks ago. I tested and found that only 25 fps with variable frame rate 100 fps works (with the settings you gave) without juddering and artifacts. 30/120 and 24/120 did not work. I was told they would look into it, but nothing back from them yet.
Hello Etienne De Durocher, Thanks for your comment! Please note that the ZCAM E2 -F6 does not output RAW 4Kp120 to the Ninja V plus device. Ninja V Plus requires a 4kp120 RAW signal from the camera if the camera is not capable of outputting that resolution an FPS externally the Ninja V Plus will be unable to record that. If this helps, please let us know. ATOMOS.
Hi @Sven, Thanks for your comment! To enable 120p ProRes RAW on your Zcam E2, please ensure that your camera is set up correctly for 4Kp120 via its HDMI out. However, it's important to note that in most cases, the camera's internal settings will dictate the available options on the Ninja V Plus. To enable 120p ProRes RAW, we recommend checking the camera's manual or reaching out to Zcam's support for guidance on the necessary settings and configurations. They will be able to provide you with the specific steps to ensure proper setup for recording ProRes RAW at 120 frames per second. If you have already tried these steps without success, we recommend reaching out to our dedicated technical team for further assistance. They will be able to guide you through the process and provide you with specific troubleshooting steps. Please visit the following link to submit a request to our tech team: support.atomos.com/hc/en-us/requests/new We apologize again for any inconvenience caused. Our team is committed to helping you resolve this issue and ensuring that you can record in ProRes HQ or 422 as desired. Should you have any additional questions or concerns, please don't hesitate to let us know. ATOMOS
I got a Ninja V+ and a ZCam E2 F6. When I turn on 6K 29.98 fps, the Ninja goes on blank red screen and pops up "no signal" before that. In 4K, everything seems fine. I've tried changing settings around but no luck so far. Any ideas?
Thank you for your comment! We are sorry to hear that you are having an issues with your Ninja V. In this instance, we recommend that you contact our technical support team; they will be able to assist you further; the link is provided below. atomos.zendesk.com/hc/en-us/requests/new Thank you for your patience once again. Atomos
Hi A7D3NProductions, Please note that 4K 120 RAW recording is only available with the Ninja V+, not the Ninja V. We have now updated our Ninja line, and the new Ninja has replaced the Ninja V, and the Ninja Ultra is replacing the Ninja V+. For more information on the new Ninja line, we recommend navigating to os11.atomos.com. Cheers! Atomos
@@AtomosChannel Thank you for your response! I did additional research and found this to be the case, and as a result exchanged the old ninja v for a v+.
Hi Max, Thanks for reaching out. Recording in 4Kp120 is currently only available with the Sony FX6, FX9 and Z Cam E2 and E2-M4 models. Kind regards, Toby - Atomos
Hi Matthew, Thanks for reaching out. Unfortunately, we are unable to release information relating to this outside of official announcements. Apologies for the inconvenience. Keep an eye on our socials for all of our product updates! Feel free to PM our socials with any further questions. Cheers, Toby - Atomos
Hello there! Thank you for your comment. Please submit a ticket to our support team using the link below and they will help you out with this: support.atomos.com/hc/en-us/requests/new Cheers! Atomos
Awesome! It's incredible what Ninja V+ can do! I'm a Nikon Z6 with Ninja V user and I'm hoping 4k 60p and/or 1080p 120p with this setup some day. Congrats for your work Atomos!
hello Atomos ZCAM E2-F6 | NINJA V+ | 4Kp120 | ProRes RAW is it supported ? Zcam official website the E2F6 is capable 6K @60fps* & 4K @120fps*
Does 4k 120p work with the a7s iii?
Hello @bentheremedia3011,
Thank you for reaching out with your inquiry regarding the Sony A7S III.
Please note that the Sony A7S III does not support 4K 120p output via its HDMI port. While it offers exceptional video capabilities, including impressive 4K resolution and high frame rates up to 60fps, however 4K at 120 frames per second (fps) is not currently supported through the HDMI output.
If you have any further questions or need assistance with any other features of the Sony A7S III, please feel free to ask.
ATOMOS
Does this also work at 30 fps VFR 120?
Hello @NickMirro,
Thanks for the comment!
Please note that the Ninja V Plus supports recording at 30 fps in standard and raw formats. It also supports 120p, but only as raw. If your camera can output these frame rates, the Ninja V Plus will be compatible.
If you have any further questions or need assistance, please feel free to reach out.
ATOMOS
@@AtomosChannel I did submit a question to Atomos on this a few weeks ago. I tested and found that only 25 fps with variable frame rate 100 fps works (with the settings you gave) without juddering and artifacts. 30/120 and 24/120 did not work. I was told they would look into it, but nothing back from them yet.
So basicly with Zcam E2-F6 you're stuck with at max 60 fps?
Hello Etienne De Durocher,
Thanks for your comment!
Please note that the ZCAM E2 -F6 does not output RAW 4Kp120 to the Ninja V plus device. Ninja V Plus requires a 4kp120 RAW signal from the camera if the camera is not capable of outputting that resolution an FPS externally the Ninja V Plus will be unable to record that.
If this helps, please let us know.
ATOMOS.
What settings do i have to choose to enable 120 prores raw on my Zcam E2?
If i choose raw over HDMI, I'm unable to change the Variable Framerate
Hi @Sven,
Thanks for your comment!
To enable 120p ProRes RAW on your Zcam E2, please ensure that your camera is set up correctly for 4Kp120 via its HDMI out. However, it's important to note that in most cases, the camera's internal settings will dictate the available options on the Ninja V Plus.
To enable 120p ProRes RAW, we recommend checking the camera's manual or reaching out to Zcam's support for guidance on the necessary settings and configurations. They will be able to provide you with the specific steps to ensure proper setup for recording ProRes RAW at 120 frames per second.
If you have already tried these steps without success, we recommend reaching out to our dedicated technical team for further assistance. They will be able to guide you through the process and provide you with specific troubleshooting steps. Please visit the following link to submit a request to our tech team: support.atomos.com/hc/en-us/requests/new
We apologize again for any inconvenience caused. Our team is committed to helping you resolve this issue and ensuring that you can record in ProRes HQ or 422 as desired. Should you have any additional questions or concerns, please don't hesitate to let us know.
ATOMOS
@@AtomosChannel Thank you very much! The solution was to Upgrade the Firmware of the zcam. Now I'm able to record 120fps 4k, Yeah 😊
I got a Ninja V+ and a ZCam E2 F6. When I turn on 6K 29.98 fps, the Ninja goes on blank red screen and pops up "no signal" before that. In 4K, everything seems fine. I've tried changing settings around but no luck so far. Any ideas?
Thank you for your comment!
We are sorry to hear that you are having an issues with your Ninja V.
In this instance, we recommend that you contact our technical support team; they will be able to assist you further; the link is provided below.
atomos.zendesk.com/hc/en-us/requests/new
Thank you for your patience once again.
Atomos
@@AtomosChannel Appreciate the fast reply. Thanks
Can you do WDR in ProRes RAW ?
Hello Atomos! I just purchased a Ninja V, is it possible to achieve 4k 120 raw over the ninja v or only the v+ model? thanks
Hi A7D3NProductions,
Please note that 4K 120 RAW recording is only available with the Ninja V+, not the Ninja V. We have now updated our Ninja line, and the new Ninja has replaced the Ninja V, and the Ninja Ultra is replacing the Ninja V+.
For more information on the new Ninja line, we recommend navigating to os11.atomos.com.
Cheers!
Atomos
@@AtomosChannel Thank you for your response! I did additional research and found this to be the case, and as a result exchanged the old ninja v for a v+.
Is it possible to record 4k 120fps on the Ninja V+ with the Z Cam E2 F6?
Hi Max,
Thanks for reaching out. Recording in 4Kp120 is currently only available with the Sony FX6, FX9 and Z Cam E2 and E2-M4 models.
Kind regards, Toby - Atomos
Why isn't 120p RAW not available on the normal Ninja V?
It's a limitation of the hardware. The Ninja V+ has a much more powerful processor that can handle the higher frame rate in 4k.
Awesome & Thanks :)
Can I expect 4k 120p support on A7Siii in the future or no? They seem like a perfect fit as they both do 4k 120p so why not
Hi Matthew,
Thanks for reaching out. Unfortunately, we are unable to release information relating to this outside of official announcements. Apologies for the inconvenience. Keep an eye on our socials for all of our product updates!
Feel free to PM our socials with any further questions.
Cheers, Toby - Atomos
The blue camera icon never shows
Hello there!
Thank you for your comment.
Please submit a ticket to our support team using the link below and they will help you out with this:
support.atomos.com/hc/en-us/requests/new
Cheers!
Atomos
Awesome! It's incredible what Ninja V+ can do! I'm a Nikon Z6 with Ninja V user and I'm hoping 4k 60p and/or 1080p 120p with this setup some day. Congrats for your work Atomos!